What is the name of the wheat harvester and how to use it?

The machine for harvesting wheat is called a wheat harvester. There are many kinds of wheat harvesters, such as harvesters and combine

What is the name of the wheat harvester and how to use it?

The machine for harvesting wheat is called a wheat harvester. There are many kinds of wheat harvesters, such as harvesters and combine harvesters. Among them, the harvester is divided into manual auxiliary simple type and tractor front type. Wheat harvester relies on gasoline engine as power and drives the saw blade to rotate at high speed through the transmission shaft, so as to achieve the harvest effect. When using the wheat combine, please pay attention to the working speed, cutting range, header height and walking route.

1. What is the name of the wheat harvester?

1, the machine that collects wheat is called a wheat harvester. The wheat harvester is powered by gasoline engine, and the serrated blade is driven to rotate at high speed through the transmission shaft, so as to achieve the harvesting effect. The rice holder and baffle on the blade play the role of stacking the harvested wheat strips.

2. There are many kinds of wheat harvesters, including lawn mowers (manual auxiliary simple and tractor front) and combine harvesters (harvesting, threshing and cleaning). The invention has the characteristics of light weight, strong power, simple and comfortable operation, convenient maintenance and clean harvesting, and is suitable for areas such as plains, hills and terraces.

Second, how to use the wheat combine harvester

1. Start: When the harvester starts, steadily increase the throttle. When its speed reaches the rated value, it is harvesting. When turning or reversing due to tool obstacles, it is necessary to raise the cutting table and lower the throttle.

2. Operation speed: In general, level 2 is enough. If the wheat density is high, the plants are as high and the yield is high, it is necessary to use the first grade. If the growth of wheat is sparse, the plants are short and the yield is low, three grades should be used.

3. Cutting range: if the load allows, try to work at or near the full width, but be careful not to miss cutting to reduce the harvest loss.

4. Header height: In order to facilitate post-cutting farming and sowing operations, the header should be as low as possible, but the header height should not be less than 6 cm, so as to avoid cutting the soil and causing machine damage. At the same time, the header height shall not exceed 15 cm.

5. Walking route: clockwise or counterclockwise rotation can be used for harvesting, and clockwise rotation is used as far as possible, which is convenient for unloading grain on the left side and reducing empty rows. For lodging wheat plots, reverse or lateral harvesting should be adopted.