What kind of window sealing strip is good? How to attach and replace the window sealing strip?

When installing windows, it is generally necessary to install sealing strips, mainly to prevent air leakage from windows. I believe many people are not clear about the material of the window sealing strip. Let's see what kind of window sealing strip is suitable for Bian Xiao. By the way, how to stick and replace the window sealing strip? Let's have a look at it with interested friends.

1. What kind of window sealing strip is good?

1, TPV material

The elasticity of TPV material is good. After professional design and research and development, the quality is guaranteed. The application effect of this kind of sealing strip is quite good, which is progressing and developing with the current production technical conditions. There are more new improvements in materials, so that it can better meet the needs of today's home life.

2. PVC materials

The aging resistance of PVC material is quite good, and even if this sealing strip is used for a long time. There are few phenomena such as yellowing on the surface, which can be said to be a representative of emerging sealing strips with wide application.

3. EPDM

EPDM is also a widely used representative of many door and window sealing strips, and the overall design is good. After many users' experience, the sealing effect of EPDM is still good. When choosing, you can choose some brand manufacturers with good reputation to ensure the long-term use of products and escort home life.

4. rubber

The most obvious feature of rubber is its durability, and rubber itself is a better material. Whether it is flexible or well designed, it can effectively block some external shocks. For our home life, using rubber as the sealing strip of doors and windows can relatively guarantee the service life.

Second, how to stick the window sealing strip?

1, how to attach the window sealing strip? Before sealing the doors and windows of the equipment, clean the positions to be pasted, and carefully remove sundries, dust, etc. When installing the equipment, use a rag to ensure the cleanliness of the paste and the tightness of the sealing strips of doors and windows.

2. Tear off the adhesive tape of the door and window sealing strip, aim at the position to be pasted, and paste it quietly.

3. When the door and window sealing strip equipment reaches the interface at both ends, slightly retract both ends of the sealing strip to the base, leaving a shortening margin of 2-3 cm, and then cut the sealing strip.

4. After the sealing strip is pasted, gently press it by hand to make the adhesive of the sealing strip stick to the doors and windows.

Third, how to replace the window sealing strip?

1, glass sealing strip and stop strip

Firstly, the window frame and sash are welded and chamfered; Then find the correct surface of the rubber strip, and use a special roller to push the rubber strip clockwise into the notch of the profile with a little force. At the same time, the head position of rubber strip is pressed down and embedded in the notch of the profile.

Generally speaking, the elastic rubber strip will shrink after being rolled. Therefore, when installing the adhesive tape at the interface of both ends, both ends of the adhesive tape should be retracted to the middle, leaving a shrinkage allowance of 2-3 cm, and then cut and embedded in the notch.

2, glass layering

Find the correct side of rubber strip, break the tip of rubber strip into the groove of profile by hand, align the exposed side of rubber strip and press hard to press rubber strip into the gap between glass and profile. Similarly, the rubber strip at both ends should be shrunk to the middle, leaving a length of 1-2 cm, and then cut and pressed into the notch.

The above is about which kind of window sealing strip is good, how to stick it and how to replace it. I hope I can help you!