The same heating, why the heating effect is very different?

Then why do you need to wear cotton trousers and cotton-padded jacket when the temperature at home is as high as 16 degrees? The temperature in other people's homes can reach 27 degrees, so summer clothes should be worn at home. Why is there such a big gap in heating effect? Let's take a look at it with the golden flagship flag brother.

Several reasons:

Heat source problem: the whole community is not hot. If a building is not hot, first check the heat source factory and heat exchange station for heating to see if it is normal. If it is not normal, it will cause a large area not to be hot. Find the heating unit in time, and you can get the heating fee back if the temperature is not up to standard.

System imbalance: the building near the heat source is hot and the building far away is not, or some rooms in a building are hot and the other part is not; Or it's hot upstairs and not hot downstairs, maybe the design is unreasonable.

Pipeline corrosion: the pipeline is blocked. If it is not found in time, it will lead to excessive water supply, low water temperature and even failure to operate normally.

Heating blockage: check whether the valve and temperature control valve of the radiator are open. If it still doesn't work, the radiator should be blocked.

Aiming at the problem of radiator blockage, the cleaning steps are as follows:

1. Close the backwater valve: first close the backwater valve, and then gently unscrew the plug on the radiator side with a wrench.

2. Flush the radiator: open the temperature control valve for flushing until the water flowing out of the radiator is clear. When the water flowing out is clear, close the temperature control valve. Then clean the radiator in turn, and open the water inlet valve to exhaust after cleaning.