Joke Collection Website - Mood Talk - What are the main events of skateboarding? What are the rules?

What are the main events of skateboarding? What are the rules?

Skateboarding is the originator of the history of extreme sports, and many extreme sports are extended from skateboarding. Skateboarding originated from surfing in the late 1950s and early 1960s, and now it has become the coolest sport on earth. Skateboarding skills mainly include: air (on the slider), inversion (on the U-shaped platform) and Ollie (take off with a board). These skills can be said to be the most important skateboarding action besides turning over. Two important international skateboarding organizations in the world: International Association of Skateboarding Companies (IASC) and World Cup Skateboarding (WCS).

Skateboarding competition is a competition with skateboarding and its fun as its main content.

The rules of skateboarding competition are as follows:

If there are few people, you can get the order of moving through stones, scissors, cloth, etc.

People can sort by black and white.

The first player starts to act, and then all the players behind him must start to act! Players who don't catch the action will get a letter! The first letter is "S" and the second letter is "K" until "S-K-A-T-E" is spelled, and the player is out! The first player failed, and the next player continued to make moves. Cycle in turn.

If the first player fails, then the second player does the action himself, and all the players behind him do the action of the second player!

You can't be raillangdings, manua, Caspers, ollie and so on!

Your feet must be completely on the board, and you can't touch the ground!

Skateboard terminology

1 180 rpm 180 degrees, such as 180 front orly.

2 360 to 360 degrees, for example, 360 pushes kickflip.

3411411bimonthly skateboarding video magazine introduces skateboarding video programs.

The pronunciation of "five-oh" after grinding the rear axle 5-0. Grind the edge of the obstacle with the rear axle. The so-called grinding is to replace the wheel with a bridge.

5 50-50 grinding double bridge is a bridge grinding action. Use the front and rear axles to polish the edge of the obstacle at the same time.

6 A shore hardness skateboard wheel hardness index. The higher the value, the greater the hardness, the greater the hardness and the lower the rebound. For producers, the key is to improve the resilience under the same hardness; For users, the key is to choose the best match between hardness and resilience.

7 ACIDDROP acid sugar slides down from the obstacle and touches the board with your hand.

The state in which an aerial ramp does not fly, such as from a ramp or a half-pipe.

The axle passes through the steel shaft of the suspension shaft of the bridge and is made of medium carbon steel or chrome steel.

The word behind 10 comes from surfing. The result of rotation when rushing to the peak is the direction of rotation away from the peak. This is used to describe the direction of rotation when skateboarding. In skateboarding, the result of rotation is that the direction of rotation facing away from obstacles is called the back side.

1 1 The bank slope is higher than the surface slope. A slope obstacle, usually used for skateboarding in cities.

The manufacturing methods of 12 slab bridge seat include die casting, casting, forging and so on. Most of them are aluminum alloys.

Turn 180 degrees, and make a 360-degree push at the same time.

14 Blunt took off with a blunt knife, jumped on the obstacle, landed with the tail of the board along its edge, and let the last two wheels land on the obstacle. The front end of the board is upturned, almost vertical.

15 air movements with and without bones. Push out the motherboard from the front and point downward.

16 boneless aerial action. Keep your front foot away from the board and grasp the board with your hands. At this time, the back foot is still on the upward moving board. Then put your front foot back on the board, take your hand off the board and land.

17 kasper, kasper, with the bottom of the board facing upward, the front foot under the board, the rear foot at the end of the board, and the board pointing to the sky.

Short for 18 COMP competition.

19 concave foot pit is a concave part of the board surface, which can increase the strength of the board surface and the leverage of the slider action.

20 COPER suspension shaft protective sleeve, used for bridge protection. It is rarely used now.

2 1 The steel pipes at the upper edge of the cross pipe and the semi-pipe ramp are used to ensure the integrity of the ramp and provide a grinding place for the skaters.

22 kerb edge, edge, the place where the skateboard contacts the most on the sliding obstacles in the artistry market is generally the edge, which is used for turning and grinding.

23 cushion PU cushion bridge fittings. Polyurethane material. Used for steering and shock absorption.

The most important part of deck skateboard 24.

The surface of the 25-drum plate was damaged after the collision.

After the disaster, the wheel is placed on the obstacle, the board edge is placed on the edge of the obstacle, and the front wheel is suspended on the obstacle.

27 downhill skateboarding is a way, competition speed and ramp turning ability, and it can also be a leisure sport.

28 DROPIN falls into the tail of the board and is placed on the upper edge of the ramp. The front wheel is suspended, and the body center moves forward until it falls into the slide.

EMB, the abbreviation of the name of a subway station in San Francisco, USA, was once known as the "Skateboarding Holy Land".

30 FAKIE, slide backwards. This shows that skateboarders like to create their own words.

3 1 fat (fat) fat moves high and far.

32 FEEBLEGRIND grinds the rear axle while the plate slides forward at a small inclination.

Flip turns the board to the ground with wheels after one or several turns along the longitudinal axis, which is derived from freestyle.

34 FOCUS artificially folds the board into two pieces. Once very popular among skaters, it was used to express despair and failure.

Freestyle Freestyle used to be very popular, and now many movements are originated from the creation of freestyle skaters.

This term comes from surfing. The result of rotation when rushing to the peak is that the direction of rotation is towards the peak. This is used to describe the direction of rotation when skateboarding. In skateboarding, the result of rotation is that the direction of rotation facing obstacles is called the front side, which is just the opposite of the' back side'.

37 FUNBOX fun table is a comprehensive skateboard obstacle composed of slopes and ribs.

38. The skateboarding posture with high flying feet and right feet in front. Most people put their left foot in front.

39. Grab the board, grab the board by hand.

40. Graphic design, artistic design of the bottom of the board.

4 1, grinding, grinding the top or edge of an obstacle with a bridge, there are several derivative actions, such as: 50-50, 5-0, tail, nose, K-Grind, Smith, sausage, Feel and Slappy.

42.GRIPTAPE sand, non-slip layer

43.HANDPLANT stands upside down with one hand and holds the board in the air with one foot or the other.

44. Handrail reinforcement, special props that imitate stair handrails, or handrails on site.

45. The suspender is an integral part of the bridge, consisting of steel shaft and aluminum alloy body.

46, heel lip heel flip, as opposed to kicking.

47. Helmets and helmets are generally used by skaters who slide half a cylinder.

48. crotch. If two inclined planes intersect at a certain angle, the joint is called hip joint.

49. IMPOSSIBLE winding is a freestyle movement invented by Rodney Mullen, a skater of the former Bones team. Turn the board around your feet.

50.INDYGRAB Inti, grab the board in front of you with the back of your hand.

5 1, JAM called a group of skaters to skate together.

52.K-GRIND is short for "crooked grinding". Slide the front axle to grind obstacles.

53.KICKFLIP kicks it.

54.KICKTURN kicks, the front wheel rotates with the rear wheel as the fulcrum, and it is used when the skateboard turns.

55. The kingpin is mainly nailed to the bridge, which is also the most easily damaged part of the bridge.

56, kink bending, rib ups and downs of the turn. Generally, ribs are straight, but there are also several bends from left to right, or several ups and downs. Change is called a knot.

57. Poor lame and skateboarding skills.

58. The launching platform of Launch Ramp generally consists of a high platform and a steep slope.

59. Lip, along the upper edge of the ramp.

6 1, manual rear roller skating, also known as roller skating.

62.MCTWIST McTwist is an action invented by former Bones player Mike McGil. It is a 540-degree back air with silent grabbing.

63. Mellon Collier grabbed the board backwards, moved it, and grabbed the board from behind with his front hand in the air.

64. Small U-shaped pond, small and half-tube, generally without vertical part, is two meters high.

65 mm mm, although the wooden boards in America are inches, the wheels are metric. Strangely, Uncle Sam screwed up.

66. Mongo's foot is Mongo's foot. Under normal circumstances, the skater steps on the board with his front foot and moves forward with his back foot. The posture that the back foot steps on the board and the front foot drives the skateboard is called Mongolian foot.

67. There is no complete transition elastic board, which is a classic market sliding action. When sliding, the front foot leaves the board, steps on the ground, and the back foot pushes the pressure plate to shoot the board bullets into the air.

68.NOLLIE's nose is the same as Aoli's, but when sliding, the front foot will suddenly exert force on Aoli, also called switch-stance fakie ollie.

69. Nose plate Nose plate tail is called' tail'.

70, nose grabs the nose with the front hand.

7 1, front end grinder grinds front axle.

72, NOSESLIDE skateboard head, using the front end of the bottom of the board to slide along the edge of obstacles.

73. Ollie Li Ao, flying with a surfboard without hands. Invented by Ollie Gelfand, a former bone player. Rodney Mullen popularized it. This is the first action that a skateboarder should master.

74. Protective mat

75. Pivot cup pivot seat, the part of the bridge foundation that cooperates with the fulcrum of the suspension shaft.

76. Platform platform

77. Short for plywood.

75.popshoveit kills Waite and adds shoveit.

76. Professional skaters

77. A quarter of the pipeline jumps.

78. Rudd is cool

79. Rail rib, or both sides of the slab bottom between two bridges.

80, RAILSLIDE riding rib, skateboard bottom.

8 1, conventional foot, sliding posture with left foot in front.

82. Restore backward, complete an action from the front, and then quickly slide to 180 degrees to end the action.

83. Protection of ribs and bottom of plate.

84. Riser bridge gasket is used to protect the board surface between the bridge and the board surface, and at the same time, it plays the role of damping and ensuring the distance between the board surface and the ground.

85, Locke Derhore Locke, ramp operation. Slide up the upper edge of the ramp, make the front axle pass the edge, stop, turn 180 degrees, and slide down.

86. Rollin rolls in, slides along the platform at the top of the ramp, and slides over the upper edge to enter the ramp.

87, five poisons, good skateboarding skills.

88. Sadeplan stood upside down with one hand, but grabbed the inside of the board and straightened his front legs.

Sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds sausage grinds.

90. Shawett killed Victor. The board rotates horizontally on the sole of the foot 180 or 360, but the body does not rotate.

9 1, Skateboard Park in Skateboard Park

92.sketchy succeeded, but the action was barely successful.

93. Rotary slip

SLAM fell and the skater fell off the board.

95.SLAPPY didn't jump up, but rushed directly to the terrain like curb for polishing.

96. Smooth special slip layer and special plastic slip layer.

97. Smith grinder The Smith grinder uses the rear axle for grinding, while the front axle does not jump on the obstacle, but slides along the edge of the obstacle.

98. "Wedge" when snakes are blocked and queue up to slide obstacles.

99. Winding roads and winding slopes.

100, spacer spacer, metal ring placed between two bearings, can prolong the life of bearings.

10 1, back. If two ramps are placed back to back and there is no platform connection, then a "spine" will be formed at the connection.

102, STALEFISHGRAB stinky fish, use the back hand to bypass the hind leg and grab the board from behind.

103, dyed screen printed board surface, no slip layer on board surface.

104, station

105, STOKED is very cool and feels good.

106, street branch road

107, SWITCHSTANCE transposition, most people learn to be familiar with skateboarding from the beginning, or the left leg is in front or the right leg is in front, which is called formal or high flying. If you are formal, you should fly high when you do an action, and vice versa, that is, switchstance. Switchstance can mean that a person can "open the bow left and right", indicating that the technology is comprehensive.

108, tail skateboard tail

109, grab the tail of the board.

1 10, coccyx, can be used as a brake and can also protect the tail of the board.

1 1 1, tail of TAILSLIDE skateboard

1 12 and the obstacle wear caused by hitting the skateboard.

1 13, thrasher Skateboard Magazine.

1 14, transition part of transition ramp.

1 15, TRANSWORLD Global Skateboarding Magazine.

1 16, truck bridge, also known as bracket, steering mechanism of skateboard.

1 17, anchor bolt bridge nail

1 18, TWEAK points the skateboard in an unusual direction.

1 19, vertical wall

120, WALLIE slides up or down on the street (instead of crossing an obstacle).

12 1, WALLRIDE, wall skateboard.

122, waxing, which is used to increase the smoothness of actions such as riding tendons.

123, wheels, toy skateboard wheels are made of polyethylene and other plastics. Professional wheels are all made of high resilience polyurethane, MDI is the best, followed by TDI.

124, roller skating, the body center of gravity is balanced on the rear wheel, and the front wheel is suspended.

125, wheel skidding, lateral braking. Instead of mopping the floor with your feet, you suddenly turn 90 degrees and brake by the friction of the wheels. Derivative action: front/back 90/ 180/360.

126, wood grain screen printing, no slip layer on the board.

127, wristband

Skateboarding event process

Ollie won the top three in the aerial competition.

1. The skateboard will increase the distance in the form of vertical superposition.

2. Each player has three chances to try the new length. If he fails three times, he will be eliminated. 3. If no one misses the last new height after three chances. Then the ranking is calculated by the score of the person who completed the previous height (the cumulative number of mistakes in the whole game)

Ollie won the first place in the long-distance race.

1. The skateboard will be placed horizontally to increase the distance.

2. Each player has two chances to try the new length. If he fails twice, he will be eliminated. 3. If the last new length is not missed in two chances. Then the ranking is calculated by the score of the person who completed the previous length (the cumulative number of mistakes in the whole game).

Skating competition

South K.A.T.E uses 2 liters in a game, and it is only allowed to exercise on the flat ground, and the successful movements of skaters are not allowed to be used again.

All skateboarding actions must be done in a pop way, and only the champion position is taken.

The market competition takes the top three, and the competition time is 5 minutes.

Bar and box, some props beside the stone.

Those who complete the action within the specified time with great difficulty, many actions and high success rate win.

Best stunt competition (rail &; Box) take the top three respectively.

The specified time is 30 minutes, and the most difficult person wins.

Ollie women's skating competition

Women's skating competition. Oh, ha ha ha.