Is floor heating used for heating? How to heat the floor heating?

Floor heating is also a widely used equipment in daily life and is deeply loved by people. With the rapid development of science and technology, there are more and more forms of floor heating. Installing different forms of floor heating requires different requirements, different methods of use and even different heating methods. So what heating is used for floor heating and how to heat it? Look at the introduction given to you below.

What kind of heating is used for floor heating?

Floor heating generally uses coal, natural gas and electricity for heating. Floor heating is usually divided into two categories, circulating system and electric floor heating. Their media are different, so their heating methods are different.

1, hydronic systems, the most common floor heating, takes hot water with a temperature not higher than 60℃ as the medium, and the hot water circulates continuously through the buried heating pipe to radiate the heat above the floor, thus achieving the purpose of heating. The liquid circulation system can be heated by burning coal and natural gas.

2. Electric floor heating is a relatively novel heating method. Different from the water heating system, the hot water pipe is replaced by a heating cable, which dissipates heat and heats up after being electrified.

How to heat the floor heating?

1. First of all, the ground source heat pump is pollution-free. The hot water of ground source heat pump is the ground water source. First, the hot water is pumped out of the ground by the ground source heat pump, and then it is pumped back to the ground after circulating in the user's home, that is, the hot water returns to the ground after circulating on the ground. In this process, only the ground source heat pump uses electric energy to pump water, and other processes do not generate energy consumption, which is quite energy-saving. However, whether this feature can be used in all areas depends on whether the address conditions of the location are suitable for using underground heat sources.

2. Let's talk about the way to boil hot water with a boiler and then carry out geothermal circulation heating. This method is not much different from the traditional heating method, except that the previous heating has now become a plastic pipe laid underground. Compared with ground source heat pump, this method consumes more energy, because the source of hot water is solved by boiler boiling water. However, it is reported in China floor heating network that this heating method is more stable in temperature and heating compared with ground source heat pump. This heating method only lays underground pipes on the traditional heating, and the heating method of water source comes entirely from the boiling water of the boiler, so there is nothing to say about energy saving.

3. Compared with the two heating methods, the ground source heat pump heating method is more respected, but it is not suitable for this area due to the influence of address conditions. According to the statistics of China floor heating network, China is a country rich in geothermal resources, which are available in most parts of the country. It is believed that with the gradual maturity of geothermal exploration technology, geothermal heating methods will be better promoted.

What kind of heating is used for floor heating? How to heat the floor heating? After reading the introduction above, you should have understood. In fact, the installation of floor heating must find special construction personnel. There are many heating methods related to floor heating, and the installation cost is different. You need to know more about it.