Summary of quality inspector's probation work

How time flies! A period of work has ended. Looking back on our work during this period, our theoretical knowledge and professional level have been greatly improved. Let's sum it up and record it in the work summary. I believe many friends don't know how to write a work summary. The following is a summary of the work of quality inspectors during the probation period (5 general remarks), which I carefully arranged. Welcome to share.

Summary of quality inspector's probation period 1, I am deeply honored to be a member of quality inspection institute. Since I entered the company, with the strong support and help of the unit leaders, department directors and old employees of the department, I have studied hard and worked hard, and I have been able to complete my tasks well. My summary of the probation period is as follows:

First, looking for the owner's footprint in confusion

Xx, xx, XX, XX is an unforgettable day in my life. On this day, I came to the quality inspection office and started my first job in my life. After graduating from chemistry, I was assigned to the food and agricultural products inspection room to do inspection work in the physical and chemical room. Although I learned a lot of knowledge about chemical testing at school, my book knowledge and practical operation can't be mentioned in the same breath, so I met many difficulties at the beginning. Fortunately, Zhou Ge provided a lot of help, and many inspections were started step by step under the guidance of Zhou Ge, or only under his guidance can we succeed. So at this stage, I followed the master step by step.

Second, keep moving forward in confusion.

In September, I have been in the company for a month. It's been a very busy month for the company. First, I work overtime to do moon cake inspection, then I am going to work overtime until eleven or twelve in the evening, and then I work overtime at noon every day to complete the task. It can be said that this is the fastest month for me, because I learned the pretreatment of liquid chromatography samples in a large number of moon cake inspection work and mastered certain liquid chromatography operation skills.

In the re-evaluation, I learned about the daily work of inspection institutions and the future development direction of inspection institutions. Because a colleague resigned, his task fell on me and made me work overtime at noon every day to catch up with the task. However, I don't think this is an unlucky thing. On the contrary, I think this is a very beneficial thing for me. Because in these short ten days, my experimental operation skills have advanced by leaps and bounds. So I must thank you for this busy month.

Third, learn to operate independently and strive to overcome shortcomings.

After the National Day, our department is faced with a huge task. At this time, after continuous exploration and continuous efforts, I have the ability to operate independently. Therefore, my task has two main aspects:

One is physical and chemical inspection, and the other is pretreatment of liquid chromatography samples. This is a stage to test my working ability. Many physical and chemical experiments are new to me. So I want to know the national standards and complete all the operations independently. Although the pretreatment of liquid chromatography samples is not difficult, it takes more time to do because of the large amount. It is not easy to add up these two aspects of work. Only by taking the time to study hard and willingly can we finish it well.

Fourth, affirm the road you have traveled and think about the unknown future.

Three months is not too short or too long, but it is a stage that has changed my life and made the fastest progress. To sum up these three months in one sentence, it should be: I am satisfied with my performance in these three months, but I will not be complacent, because there is still a long way to go. I will keep a learning attitude to do more things, obey the arrangement of leaders and be a collective employee.

Summary of probation period for quality inspectors II. Time flies. At the end of the year, reviewing the work process in the past five months and summing up the experience and lessons will help to foster strengths and avoid weaknesses in future work and do a good job.

Worked as a technical inspector in xx Project Department from July 15, 20xx. In this big family, I learned dedication and care from the leaders and diligence and self-discipline from my colleagues.

I just arrived in the project department in July, because I didn't know anything when I first came into contact with xx, so the leader gave me drawings to give me a preliminary understanding of xx. Give me the design instructions and let me know a series of quality control requirements of xx; Give me the construction plan, let me know the sequence and method of construction, take me to the construction site for a period of time, and introduce the tools used in construction. Although the project had not been officially started at that time and the construction tools were not complete, it gave me a deeper understanding of the work to be done in the future. After staying at the construction site for a while, I felt that I was in a state through various contacts. The leader asked us to pay off every process of xx with checkpoints. At first, it was slow, and we had to look at the drawings and return them, but with the change of time, our speed was accelerating and our understanding of the drawings was deepening. Some data on the drawings form a conditioned reflex in our minds, and then we have a sense of accomplishment in our hearts. This is a feeling I didn't have at school before. It's beautiful.

In August, the project was gradually started. First, xx was carried out. After the initial surprise and inadaptability, I devoted myself to my work and gradually became familiar with it. After a week or so, the packing team came into the field and xx began. The leader arranged for me to conduct technical quality inspection on xx. During this period, I gradually found that managing workers is a very profound knowledge. If we can't make full use of all favorable factors and related quality acceptance system, our reputation can't be established and our quality can't be guaranteed at all. I didn't do well in this respect, which will be a focus of my future work. During this period, because xx of the document project department of the group company became my master, I was preached, taught and puzzled at work.

The preconditions for September xx have been basically met, starting from 13. The leader arranged for me to assist monitor xx in quality work. During the period, I almost couldn't stand xx several times, but I saw a group of handsome guys around 20 who could stick to their posts at the speed of two a day. Arrive an hour early and come back an hour late every day, and everything will be all right. Everyone is ashamed and knows that they still have a lot to learn.

10, 1 1, 12 have been following xx for several months, waiting for xx every day. At first, I knew I had to do it, so I did it. Later, I learned why I did it through Master, and I felt that what I did was at least meaningful. At the same time, he was also responsible for engineering data work and began to take the first step towards a multi-job career.

During these five months, I learned a lot of experience and knowledge, and made great progress in communicating with people, but I also found some shortcomings. Through the guidance of Master and other predecessors, my overall level has been improved.

In short, in the future work, I will constantly sum up and reflect, constantly spur myself, replenish my energy, improve my quality and professional level, and contribute to the development of the company.

Summary of quality inspector's work during probation period: 3 years passed quickly, and 20xx years passed in an instant. Looking back on the past year, as an inspector in the company's quality department, I have made a lot of progress, but there are also some shortcomings.

In the quality department for one year, with the care and guidance of the leaders and the support and help of my colleagues, I not only completed my job diligently and practically, but also successfully completed all the temporary tasks assigned by the leaders, and improved myself in all aspects. In order to do better in the future, sum up experience and draw lessons, I have summarized my work in the past year as follows:

1, study hard and learn new knowledge comprehensively.

Inspection work is a special post, which requires endless learning of new knowledge and improvement of skills. In order to meet this requirement, we must pay attention to learning new knowledge, new technology and new drawings.

2. Work hard to accomplish the above tasks.

After half a year, it is difficult for non-professional students to learn the quality of machining, but I actively responded to the difficult challenges and completed the tasks assigned by the leaders.

3. Positive attitude towards daily life and work.

Over the past year, I can consciously abide by the company's rules and regulations. At work, don't be late, don't leave early, take the initiative to ask for leave, respect leaders, unite colleagues, treat people sincerely, work hard, and strive to achieve the following two aspects:

First, self-discipline according to regulations. I will never do what the leader forbids, but I will try my best to be a competent quality inspector without violating the rules and regulations.

The second is to use system self-discipline. I strictly abide by the rules set by the company. In terms of quality, resolutely do what should not be used, resolutely do not use it, and do not engage in humanism. You can also take a positive attitude towards your work and work hard to finish it, so as not to be offside and not in place. In the work coordination with other colleagues in the department, we have achieved mutual understanding, mutual help, mutual learning and sincere treatment, established friendship and gained many useful inspirations.

I know that behind the achievements, there are the efforts and struggles of all the staff in our quality department. In the future, I will still treat extraordinary things with a normal heart, be brave and enterprising, and do everything well as always.

4, the main problems

Looking back at my own problems, although I can work hard and make some achievements, there are still many places that need continuous improvement and perfection. I have been working hard to do well. Due to the lack of professional knowledge and work experience, the solutions to some problems are too simple and the working methods are too simple; Sometimes, we look at problems one-sidedly, and we are not calm enough to deal with some problems. On the basis of completing the tasks assigned by the leaders, we will give full play to our own advantages, continue to strengthen the study of professional knowledge, and further improve various inspection skills.

5. Work plan for next year

In the new year, I am determined to seriously improve my business and work level and contribute my due strength. Next, I will learn from other colleagues and colleagues with an open mind and learn good working methods; At the same time, in my spare time, I will work hard to learn business theory knowledge, expand my knowledge, and constantly improve my professional quality and level, so that my comprehensive quality can be improved to meet the development of the company and the needs of society. It is necessary to further strengthen the professionalism, enhance the sense of responsibility and improve the level of work completion.

I think I should try to do:

First, in accordance with the requirements of leaders, strengthen learning and master mature technology.

Second, broaden professional knowledge, participate in all kinds of inspector qualification training and examinations, and make yourself a qualified quality inspector as soon as possible.

Third, seriously study and implement the Quality Control System of Machining, work hard, accept the daily and temporary tasks arranged by the company, and finish them in time.

Four, the inspection instrument should be operated correctly, cleaned in time, registered in time, and maintained daily.

Fifth, love your job and continue to learn quality.

In short, state of mind determines state, and state determines success or failure! Responsible for the company, caring for the society, persistent in work, enthusiastic about colleagues and confident in yourself! Be yourself!

Quality inspector probation summary 4 Dear leader:

Hello!

I became a probationary employee of the company in April 1 year. According to the needs of the company, I have been working as a quality inspector for three months now. As a fresh graduate and new to the company, I used to worry about how to get along with people and how to do a good job. However, the relaxed and harmonious working atmosphere and United corporate culture of the company made me quickly complete the transformation from a student to a staff member.

During the probation period, I studied and worked in the quality inspection department for some time. This job is new to me, which is quite different from my professional knowledge. However, the patient guidance of leaders and colleagues in various departments has enabled me to adapt to the working environment of the company in a relatively short period of time and become familiar with the whole operation process of the company.

In the work of this department, I have always been strict with myself, earnestly and timely doing every task assigned by the leaders, and taking the initiative to share the worries for the leaders; Learn from colleagues about problems that you don't know professionally and non-professionally, and constantly improve and enrich yourself, hoping to be independent as soon as possible and make greater contributions to the company. Of course, there will inevitably be some small mistakes in the work, which need to be corrected by the leaders; However, as a lesson from the past, these experiences have also made me mature and consider all kinds of problems more comprehensively to prevent similar mistakes from happening. Here, I thank the department leaders and colleagues for their guidance and help, and thank them for reminding and correcting the mistakes in my work.

Founded in April, the company is the largest supporting production enterprise of steel castings in Guangxi construction machinery and automobile industry at present, and it is also a key supporting enterprise in the city. The medium-term development goal of the company is to use time to build an international large-scale enterprise group integrating casting, machining production, R&D and international trade.

In the past three months, under the correct leadership of leaders at all levels in the company, with the solidarity, cooperation and care and help of colleagues, I have successfully completed various tasks, and my own quality, thinking and interpersonal communication have been further improved. The achievements and shortcomings of the past three months are summarized as follows:

I. Morality, personal accomplishment and professional ethics

In the past three months, I have conscientiously observed labor discipline, arrived at work on time and used my working hours effectively. Stick to your post, you need to work overtime to finish the work on time, and ensure that the work can be completed on time. Earnestly study knowledge; Have a strong sense of responsibility. Actively learn professional knowledge, have a correct working attitude and treat every job seriously and responsibly.

Second, the job and work ability

My job is a quality inspector, which is an important position to grasp the quality of products. I am well aware of my importance, and I said that I would do my job well with the goal of "doing my job better", and I would study hard to enrich myself after work. Although I will encounter many setbacks in my work, I believe in myself. There is a good saying, "Where you fall, you get up." I am still very young, and I believe that as long as I pay more than others, I will be able to make up for my lack of professional knowledge.

III. Summarizing the work in the past three months, although we have made some achievements and made great progress, we still have the following shortcomings:

1, sometimes there is still a gap between work and leadership requirements. On the one hand, it is due to the lack of personal ability and quality, on the other hand, it is inefficient when the workload is heavy and the time is tight. At work, the sense of responsibility is not strong, a little sloppy.

2. Sometimes work sensitivity is not very strong. Not sensitive enough to the things assigned by the leaders, sometimes the work is not ahead of schedule and the report is not timely enough.

3, play in the work is not obvious enough. If you don't grasp the overall situation of your work well, you won't take the initiative to find a way ahead of time. A lot of work can only be considered average.

4. I still have many shortcomings in social interaction. Sometimes I can't say it in my heart, and I dare not say something. I have no courage and masculinity. I need the help of the leader when dealing with some things.

5, it is not careful enough in quality inspection, not enough professional knowledge, there are many things you know are wrong, but you can't say why. I was a little flustered during the inspection because I was not fully prepared before the inspection. I often pay attention to this end, but I ignore that end. I'm a little top-heavy, and I can't carry out systematic work in all directions.

IV. Future work plan

1, I will further develop my advantages, improve my shortcomings and do my best to do my job well. We should maintain a good mental state and carry forward the spirit of hard work, advancing despite difficulties, striving for perfection, being rigorous and meticulous, being proactive and "daring to fight". Clear up work ideas and improve work efficiency.

2. Before inspection, I must know the items, inspection methods and technical requirements to be inspected. In order to make preparations in advance in the inspection and inspection work. And should be prepared in advance before the inspection, and carefully supervise and inspect.

3, do a good job of supervision in the process of inspection, timely find and correct the problems existing in the process of inspection. Track and inspect the production and whole process of high-quality processing technology to ensure that each process is qualified. Strictly control the quality of production workpieces to avoid quality problems.

I cherish this job very much. In the past six months, I have learned a lot and realized a lot. Seeing the rapid development of the company, I am deeply proud, and I am more eager to be a full-time employee here, realize my goals, reflect my life value and grow together with the company. Here, I apply for becoming a full member, imploring the leaders to give me the opportunity to continue to exercise myself and realize my dream. I will do my job with humility and full enthusiasm, create value for the company, and look forward to creating a better future with the company!

The summary of quality inspector's probation period is five days, and the probation period of several months is fleeting. Chewing slowly, I think this time is a precious memory in my life. I not only gradually deepened my understanding of quality inspection. In a word, as a manager of quality inspection department, I have made a lot of progress, but there are still some shortcomings. In order to work better in the future, sum up experience and learn lessons, I specially summarize my internship for several months as follows.

First, review the work, sort out and summarize the experience and methods

During the internship, I served as the manager of quality inspection department, mainly responsible for the control measures of plumbing parts suppliers. When I first came into contact with this job, I found that the suppliers were not standardized and mixed up from time to time. Therefore, combined with theoretical study and practical experience, I summarized and implemented the following supplier quality control methods:

First, strengthen the quality awareness of suppliers. Analyze incoming data every month, guide, communicate and visit suppliers who mainly affect materials, improve suppliers' quality awareness and strengthen quality management mechanism; The supplier is required to establish quality control points such as feeding, process and final, and the nonconforming products produced in the first article or process need to be classified, isolated and identified. Send it to our company for confirmation when necessary, and resolutely put an end to mixed loading.

The second is to optimize the evaluation criteria of new suppliers. Clarify and strengthen the minimum threshold for new suppliers, requiring them to have quality experts or provide relevant quality reports as required by us.

The third is to take punitive measures against unqualified suppliers. Punish or directly cancel the qualification of suppliers according to the seriousness of the acts confirmed as malicious mixing; Suppliers with repeatedly unqualified incoming materials will be blacklisted, and if the circumstances are serious, procurement will be suspended. The supplier is required to provide written "corrective measures" within the specified time, and purchase after verification and confirmation.

The fourth is to regularly evaluate the industrial efficiency of suppliers. The quality inspection department will cooperate with the purchasing department to re-evaluate the industrial efficiency of suppliers on a regular basis, avoid ideological slack and quality loopholes once and for all, and reorganize the list of qualified suppliers and supplier ratings.

In addition to innovatively implementing the control method of incoming inspection, I also conscientiously implemented the work plan of incoming inspection, process inspection and final inspection, which not only improved the quality inspection level of plumbing fittings, but also improved the overall quality of the company's products.

Second, do it yourself and appreciate the gains from your work.

In my impression, the manager of quality inspection department is a simple job. But only when I really put myself into my work can I appreciate the charm of the details of this job. Let me talk about my experience and gains in my work.

One short step makes an everlasting regret. In order to avoid mistakes and missed inspections caused by low-level mistakes such as lack of posts, I often go to the site for inspection. In the process of inspection, I implement the system that the previous procedure is responsible for the next procedure and the next procedure is rechecked. "Try to do better" is the biggest feeling and gain during my internship.

As the manager of quality inspection department, I gradually realized that I should not only have knowledge of technology, materials and inspection, but also have comprehensive management ability, market awareness, be familiar with the relevant contents of product budget and price control, and fully grasp the contract terms signed with suppliers. Although I had similar experience in my previous job, this internship made me more aware of the importance of continuous learning, continuous progress and comprehensive enrichment.

Besides, I also realize that in practice, we should constantly change our working methods, strengthen communication and keep close contact with other departments. Find a correct position in the work, convince people with emotion, convince people with reason, strive for the understanding and trust of other departments, and create a harmonious quality inspection environment. Of course, we should not only strengthen unity in the process of work, but also pay attention to our words and deeds in peacetime, be modest and prudent to superior leaders, and respect and obey; Be strict with your colleagues and be lenient with others; Communicate with suppliers to seek a win-win situation. We will carry out the principles of not despising superiors, not treating subordinates arrogantly, and being supercilious to the outside world.

Three, clear responsibilities, understanding the shortcomings in the work

Quality inspection is a continuous work. The society is developing, the times are progressing, and the characteristics of products are constantly updated. As the person in charge of quality inspection department, we must discover, study and solve new situations and problems in spare parts quality inspection and management in time with high sensitivity and consciousness. Only in this way can I finish my work dutifully. Welcome the first supervision and audit since the certification company passed the management system certification of our company. Our department accompanied and fully cooperated with the audit, and issued a report on corrective and preventive measures to the responsible department according to the audit opinions, and comprehensively tracked the implementation of corrective and preventive measures within the time limit.

Third, the highlights of work

1. A three-inspection mechanism has been established, so that the quality control function can really be brought into play.

2. By optimizing the management system, the management responsibilities are further clarified, the management points are straightened out, and the principles of environmental management planning are revised to make it more applicable, operable and effective.

Fourth, the shortcomings in the work and improvement ideas

Although in just over three months, our department has done a lot of concrete work and made small achievements, but we know that there is still a gap from the job requirements, as follows:

1. Although the quality control mechanism has been established, it still needs to be further improved. In the future, we will strengthen the inspection of employees' self-control ability and enhance management and quality awareness in all directions.

We haven't done enough work to follow up the resolutions made at the company's regular meeting. When we fully realized this, we made a profound reflection and began to take action to do this work well.

As a quality inspection department, due to the busy production tasks in recent months, there are few daily inspections on site. But no reason can be an excuse. In the future, we will balance all aspects of work, spend a lot of time on management and quality control, and really share the worries for the company.