The key problem of not pressing the line when driving in a corner

What is the most critical problem when driving without turning? Unfortunately, many students died here in the second exam. Today, let's talk about the key issues of driving without pressing corners.

First of all, when the car turns into a corner, try to get close to the right side line, because the first corner is to turn left.

Second, look at the car near the right line and turn left at the left front corner.

3. Look at the left rearview mirror after turning left, from which you can clearly see the distance between the rear body and the left side line. Through the trimming direction, keep it at about 30cm.

When you reach the corner, go straight back to the right direction. At this time, take a look at the small mirror in the right front corner of the car. You can see from the mirror that the car body and the right side line are kept at about 30cm.

If there is no small mirror in front of the car, you can look at the big rearview mirror on the right. Similarly, you can see from the mirror that the distance between the right side and the right line of the car body is kept at about 30cm.

By trimming the direction, the distance between the car body and the sideline is always kept at about 30cm, and it is always driven out.

Please note that this method used to be old, because parking can be done according to the driver's rules, so you can't stop when operating, you have to step on the clutch pedal to slow down. The lower the speed, the easier it is to adjust the direction and improve the pass rate of this project.

Many methods are to look at the front of the car. I recommend looking at the rearview mirror because in the actual training and examination process, I found that most of this project failed because the rear wheels were mostly pressed.

Million car purchase subsidy