Dimensions and uses of angle iron shelves

When it comes to shelves, everyone will think of supermarket shelves. In fact, there are many kinds of shelves, and angle iron shelves are one of them. It belongs to a light shelf. The raw material of angle steel shelf is high-quality cold-rolled steel plate, which is stamped and formed. Moreover, the angle iron frame is easy to disassemble and adjust, flexible in fire prevention and good in transformation performance. But many friends are not very familiar with angle iron shelves, so Bian Xiao will tell you something about angle iron shelves.

Angle iron shelf size

Because the angle steel is generally about 3 meters each, if the angle steel shelf is made, it is generally made according to the following dimensions: 1.2m*0.4m* 1.8m (length * width * height), which not only saves materials, but also facilitates lamination. Of course, this number is not fixed, so it should be used flexibly according to the warehouse.

Light angle steel shelves are adopted. The standard height, width and length of light angle steel shelves are 1500/ 1800/2000, 400/450/500/600 and 1200/600 respectively.

Widespread use of angle steel shelves;

1)? Widely used in enterprise warehouses, supermarkets and institutions, and the product can reach the level of similar products in developed countries.

2) Light goods shelves can also be laid with anti-static facilities on laminated plates, and can be made into anti-static goods shelves, which are now widely used in electronic enterprises.

3) Light shelves in the same direction can also be connected into a whole shelf by bolts.

Installation method of angle steel shelf

1. Triangle is installed at both ends of each column. The triangle at the top and bottom of the shelf is in the same installation direction, and both are right angles.

2. After fixing the triangle, start to install the laminated plate.

3. After fixing the remaining columns, erect the whole shelf, put it on a flat ground, gently shake the shelf to see if it is stable, and then reinforce all the screws with a special screwdriver.

4. After the first floor and the second floor are installed, install a side column of the whole shelf, and then install other floors with the same or different floor spacing according to your own needs, without tightening the screws too tightly. For the convenience of installation, the first two pieces are fixed. When installing the remaining columns, special attention should be paid to the spacing of the laminates, otherwise the laminates will be uneven, resulting in unbalanced shelves.

5. After picking the column, take out the triangle block (16 block) to be fixed and divide it into two whole blocks. Note: Do not tighten the screws too tightly before installing the bracket. After the installation is completed, before the screws are tightened, make sure that the shelf shape is normal and there are no other problems in the warehouse shelf.

6. After determining the position of the laminate, turn the lying shelf upside down and fix the column on the other side of the shelf. Pay attention to the contact between the bottom of the column and the ground, and reserve enough height as the scaffold according to the environment of the installation site. Then pick out the column (4) of the shelf.

The angle steel shelf is being assembled, so all the main parts in the package should be cleaned and separated according to the types. The best way is to count the number of holes between laminates on the side where the column is installed, so as to determine the interval between laminates, so that there will be no problem.

7. Finally, put the installed shelf in the place where it is used. The fixing method is: first fix the top of the column on the floor, and then the shelf factory will fix another column on the floor in the same way. The bottom installation is the same as the top.

Angle iron shelves are very common in our life. There are many kinds of angle iron shelves, the most common ones are universal angle iron shelves, rivet shelves and angle iron welded shelves. Moreover, angle steel shelves are widely used in many fields, such as supermarket shelves, office shelves, warehouse shelves and so on. In addition, angle steel shelves can also be laid on the antistatic floor, which is also widely used in the electronics industry. If you are interested in angle iron shelves, you can pay more attention to the Tuba rabbit platform.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~