Can anyone tell me how to paste exterior wall tiles?

1. The base layer should be cleaned before laying tiles. If there are decorations such as lime plaster, latex paint, wallpaper, etc. on the wall, or there is dirt on the ground, they must be cleaned up, otherwise the cement mortar will bond with the base layer. Not strong.

2. Floor tiles should be laid from the inside out. If the ground has a slope or there is a floor drain, attention should be paid to finding the slope in the direction of drainage; wall tiles should be laid from bottom to top. For the sake of appearance, The bottom bricks should be pasted later. After laying the wall tiles, press the floor tiles. If there are half bricks, try to put them underneath. In addition, one wall cannot be attached to the top at one time to prevent the ceramic tiles from collapsing due to their heavy weight.

3. Wall tiles have a high moisture content, and this feature must be taken into consideration when pasting. The base layer should be fully watered and moistened before tiling, and the tiles should be soaked in water for at least 20 minutes before use.