Who tells me how to play a flat-core wooden bracelet?

Millennium Wood Language: Playing with bracelets is the most fashionable practice place, just like drinking tea and composing songs, it is also a fashion in antique collection.

Bracelets made of different materials have different ways of playing. The following are the four most common wooden bracelets:

First, sandalwood

Thousand-year-old sandalwood beads (2.0cm* 12)

When playing sandalwood bracelets, the first step is the same as playing gold nanmu bracelets. First, clean them thoroughly.

2. Let it stand naturally for a week. Let the beads dry naturally. At the same time, the surface is in uniform contact with air, forming a fine and uniform oxide protective layer. Pay attention to avoid high temperature and direct sunlight.

Thousand-year-old sandalwood beads (0.6cm* 108)

After playing with cotton cloth and glove tray for a week and a half, the surface becomes smooth and can be worn.

Note: it doesn't matter if you are a little wet, but you can't wear it in the shower and swimming. Beads will become active and clean in the later stage of cotton cloth and be used for beading. Don't touch it with sweaty hands, it is easy to block pores and look black and dirty.

Second, lobular rosewood

The lobular rosewood has delicate wood, high oil content, and is not easy to deform and crack, so it does not need oiling when serving.

Millennium rosewood beads (0.6cm* 108, containing beeswax)

Remove wax or dirt with a white towel for about two or three hours every day for two days.

2. It is normal that there will be red marks on the surface after rubbing it with a soft cotton cloth plate for a week. Keep loading.

3. After standing for several weeks, the beads naturally dried and oxidized to form an oxide film. This can protect rosewood from further oxidation. The oxidation process will occur when it is placed naturally.

Millennium rosewood beads (2.0cm* 12)

4. Start the handwheel. Hands are very demanding. They must be clean and dry. Wear gauze gloves if you sweat. You can dish for about 30 minutes every day for about one week to two weeks. At this time, you will find a phenomenon. Dry hand plate beads have a sticky feeling, indicating that a thin patina has formed on the surface of the beads.

5. After the patina is formed, it is the hardening of patina, and it is naturally left for about a week.

6. Repeat the process of 4 and 5. After 3 months, dish up the beads, and you will find that the surface of the beads has a very aura luster, which will reflect light under the sunlight.

Third, Huang Huali.

Thousand-year-old wood Hainan Huanghua Lizhu (0.6cm* 108)

Huang Huali wins with the pattern, but it is not easy for Huang Huali to tease the ground directly with his hands. After a period of time, the wood will be dark brown (not as noble as rosewood) to cover up the beautiful patterns (but it can still be seen in warm light or sunshine)!

Thousand-year-old Hainan Huanghua Livzon (2.0cm* 12)

2. It is suggested to wipe the bead surface with a white towel first, and then put it directly by hand, but it will eventually turn black. Therefore, Huang Huali bracelets should not be put by hand often, but should be taken out regularly to show off and show off!

3. The posture of the dish is the same as that of rosewood.

Note: rosewood is fine in texture, high in oil content and not easy to deform and crack. You don't need to oil the plate when you load it.

Fourth, agarwood

In fact, the bracelets of agarwood beads do not need to be deliberately played. Although the patina will make the bracelet look better, the patina layer may block the pores on the surface of the bracelet, making it difficult to distribute the fragrance, resulting in the fragrance weakening or even no fragrance at all. Only a few high-quality agarwood with good oiliness can emit fragrance while forming patina, so the agarwood beads bracelet still need not be deliberately played, so you can wear it at will!