What is the production standard of professional sun room?

1 If an aluminum alloy frame is selected, it is recommended not to choose a square with a wall thickness of 100*44*2.00. In theory, Lao Wei thinks that the minimum configuration specifications are 100* 100*2.00 and 100 * 44 * 2 in principle. The thickness of wildebeest is 3.00. Please refer to my blog for specific assembly methods. Use stainless steel countersunk head screws for connection. The problem is, I found that a large number of owners actually used squares with a thickness of 100*44* 1.2, and even materials with a thickness of 76*44* 1.2! ! Have you ever thought that although the sun room is stuck with glass, it weighs 60 Jin per square meter. After long-term pressure, too thin profiles will definitely break! In particular, the aluminum alloy assembly sun room is completely connected by several screws, and what is more serious is that a master actually uses rivets to connect it. Once the typhoon comes, when you tremble, the glass breaks from the combination place, and you can't hit your own people, or you may hit people in the community! Don't believe what the merchant said: My materials are the same as those used by people, and my skills are the same as those of people. Is this possible? Profits can't be so different!

2 Stainless steel material specification: the specification is 95*45* 1.65 or 75*45* 1.65 and100 */.65. Of course, the specifications also increase or decrease according to the building area and span of the sun room. Theoretically, Lao Wei thinks that the thickness of 1.5 is good. Stainless steel welded sun room frame is one of the main recommended materials in Lao Wei! Because stainless steel welding is better than aluminum alloy in both beauty and stress! Whether to use 304 material or 202 material depends on the demand. If the surface is colored, 202 will do, and 304 will be expensive. If 304 material is used, a 95*45* 1.65 square pass is near 800 yuan, and the cost is not lower than 850 yuan/square meter. Plus labor costs, profits, etc. , is 1 thousand!

Specifications and rust prevention requirements of CTT: The purpose of CTT's production and installation of sun room is because of conditions, such as super-long span, awning of factory gate building and so on. The cost is also high!

Journal: I don't have to say it, do I?

2. Glass installation: In principle, at least 6+0.76+6 laminated double-sided tempered glass shall be installed, and the edges shall be ground around. If there are other requirements, you can install 8+ 1. 14+8 or10+1.14+10 laminated glass.

Note: Try not to install 5+0.76+5 laminated glass, and it is forbidden to install single-sided glass! If it is 8 cm on one side, or 10 cm 12 cm, once it is broken, it will hurt. At the very least, it will cause you to install glass urgently, because once a single piece of glass is broken, it will be completely transparent, and if it rains, it will be troublesome.

Third, the use of glass glue: you must use the structural curtain wall glue produced by regular manufacturers, and the effective use quality guarantee time is more than 30 years! Note: neutral glass glue or waterproof glass glue and acidic glass glue are prohibited!

Fourth, acceptance: once the above points are qualified, it depends on the overall effect! Note that handmade things strive for 100% perfection, but there is no absolute perfection.