Five demonstration articles of training summary general edition

Training is divided into on-campus training and off-campus training in time and space, including teaching probation, teaching training and production training. The following is a summary of the general training I brought to you, hoping to help you!

General edition of training summary 1

20__, the new semester started, and we practiced on campus for two weeks. The two-week internship life is hard, tense, beautiful and meaningful. During the internship, our new group, under the guidance of the instructor and the support and guidance of school leaders and other teachers, launched a vigorous internship in the school. As an intern teacher in a sports school, I have always been strict with myself, paying attention to words and deeds everywhere, keeping in mind the internship rules, respecting the school leaders and instructors, listening to their opinions with an open mind, learning from their experience, and actively completing the tasks assigned by the instructors. Now, my internship has been a complete success. I am very satisfied with this. The following is the main summary of my internship in school:

During the internship, I mainly completed three aspects of work: First, the internship. At the beginning of the internship, I mainly listened to other teachers' lectures, carefully recorded the contents of lectures, learned teaching methods and learned teaching experience. The second is to attend classes in person. Under the guidance of the teacher, I carefully prepared the required teaching plan, realized and found my shortcomings in the technical class, and made great progress by guiding the teacher and classmates to discuss and correct mistakes. Third, exchange experiences with instructors and other interns in time and constantly improve themselves.

Most of our internship courses are mainly professional courses such as ball games, and my internship targets are primary and secondary school students. They are lively and active. Teaching should proceed from their reality and combine the physiological and psychological characteristics of this age group to find a teaching method that makes them feel easy to understand and accept. It's difficult for a new intern.

As we have just entered the role of middle school teachers from the role of college students, we will intentionally or unintentionally bring the teaching methods and models of university teachers into the middle school classroom. I didn't take into account the different teaching objects and environment, which made the teaching methods very different from those in universities, so I didn't adapt at first. I have been accustomed to the teaching mode of university teachers intentionally or unintentionally, and I teach quickly. The 45-minute class is finished in 30 minutes, but the students' learning effect is not high. After teaching a lot of movements, the students still didn't master them. Of course, with the constant practice and the help of the instructor, we have gradually learned the teaching methods and modes in middle schools, and the teaching effect will be better.

As a teacher, maybe your class is thorough and clear, maybe you care about your students like a loving mother, maybe you are handsome and beautiful, but having any conditions will not make you have a higher position among the students. What we need is comprehensive quality and a teacher. You can't be a fascist in the students' mouth, nor can you be a peacemaker in their eyes. The only way for students to really convince you is to tap your personality charm. What is "personality charm"?

First: Humor mechanism.

Humor can bring laughter to people. No matter in class or in extracurricular activities, any student doesn't like the lifeless and depressing atmosphere. Play your humor in time, you will get unexpected results, and students will like you for it.

Second: rich knowledge reserves.

The main task of a teacher is to teach. It is said that students should be given a glass of water and teachers a bucket of water. In fact, teachers should be running water. In class, you may not imagine what kind of questions students will ask, so when preparing lessons, you should not only read more textbooks and some academic works, but also read more professional books at ordinary times to enrich your knowledge reserve. Third: dress neatly, cleanly and appropriately.

As a young man, this aspect should be the most noteworthy. Young people have young capital. We are teachers. We can't wear fancy clothes or have weird hairstyles. This is the basic requirement. But we don't have to dress very seriously at all. It's very formal and stuffy. But it should be full of youth and vitality. In addition, we must always pay attention to our own image, always keep it clean and tidy, give students a fresh and natural feeling, and let students be willing to contact you.

Fourth, flexible language art.

Nowadays, students have gradually formed their own way of doing things, which determines that teachers can neither preach stiffly nor plead blindly. My classmates fell out and I was at a loss. At first, I shouted at them with an expression on my face, but they couldn't hear me at all. If you glare at me, it may be a long time before they see me. Therefore, it is necessary to attract students' attention from the beginning and not give them a chance to chat by themselves.

Secondly, through this internship, I have greatly improved in many aspects:

First, through practice, I have mastered some basic teaching methods and skills and improved the teaching effect and level. In the teaching practice again and again, in the process of communicating with the instructor again and again, my teaching level and understanding of teaching have improved a lot.

Second, through practice, teachers' sense of responsibility and honor has been enhanced. Teachers bear the heavy responsibility of "teaching and educating people" and cultivating future talents of the motherland, so he is glorious.

Thirdly, through practice, I have enhanced my communicative ability and oral expression ability. How to deal with the relationship with teachers and classmates? In the process of getting along, I also improved my communication and communication skills. It laid a good foundation for future work.

Pointed out the direction of efforts in view of their own shortcomings in the internship:

1. Use the educational theory you have learned to cultivate your ability to observe and analyze educational problems. If possible, it will be more beneficial to your own teaching to conduct educational surveys.

2. Carefully analyze yourself after each class, listen to the opinions of other teachers with an open mind, and write a summary after class in time.

These are some of my own experiences in educational practice. I believe that during the internship, we all paid a lot and learned more. This period of time is a beginning for those who want to devote themselves to education, and it should become a beautiful memory; For those who have no intention to devote themselves to education, this is the first and possibly the last time to be a teacher, and I believe it will also be a wonderful memory in life.

Training Summary General Edition 2

The two-week e-commerce training course ended today.

To tell the truth, time flies quickly, because many public holidays in these two weeks, the opening holiday of the school sports meeting and the Asian Games, washed away some of our training courses. In a short time, we can't fully grasp the knowledge of e-commerce, but at least we have a deeper understanding of it. During the training, we first came into contact with the "Network Marketing Ability Show". On this platform, we can see more simple explanations and suggestions of others on online marketing, from which we can learn a lot of knowledge that we have never been exposed to.

After that, we registered the accounts of Taobao, Yi Bei and Paipai, compared the similarities and differences of their websites, and analyzed their characteristics in web design, only to know that they are all shopping websites, but the different positioning of the websites and the people they serve will lead to different influences on netizens. This is a process of accumulating experience for a long time, and the choice of direction is very important. Therefore, online marketing is not as simple as we thought. Not just registering an online store to complete the task. Need online shop positioning, post-management and promotion.

At the same time, it is also a continuous training, such as experience, web analysis report, online customer analysis report with the seller's customer staff, and analysis report selected by the third-party logistics company. These operations require us to go to the event site in person or go online to investigate and understand. Although the students complain constantly, we know that the biggest beneficiary of completing these homework is not the teacher, but ourselves. After all, it is better to practice in person than others. Completing these homework is not only a process of completing homework, but also an expansion of ideas.

Two weeks of training can't make us fully understand online marketing, and then we need to pay more attention to and learn from ourselves.

Training Summary General Edition 3

It's time to end the training again. During the training, I basically understood the function and classification of CNC milling machine, the structure and main instructions of CNC milling machine. Understand the common tools and NC machining instructions of NC milling machine.

Familiar with NC milling programming instructions, program formats and programming methods. Then I didn't understand the tool radius compensation function, which brought me many difficulties in my later study. Later, I learned that if we program directly according to the contour line of the workpiece, when machining the inner contour of the workpiece, the actual contour line will be larger by a tool radius; The opposite is true when machining the outer contour of a workpiece. Then with the passage of time, I learned the tool length compensation, fixed cycle machining, subroutine and macro program. Pass the six-week training period. I know the future of modern machinery industry, and I am familiar with the knowledge of CNC milling. More importantly, I know that I have little knowledge of CNC milling and I am not active in learning. Learning should be down-to-earth and not so-so, just like the essence of NC milling programming. You can't make mistakes. If there is a slight error in the program, the workpiece may be useless, and the safety of tools, machine tools and lives cannot be guaranteed.

Therefore, the solution in this respect, I think, should be to strengthen our knowledge and operational skills, so as to effectively avoid this kind of thing. This reminds me that milling is a meticulous and steady job, and there is no room for carelessness. During this training, the teacher has strict requirements for us, such as cleaning after each training and observing the safety production regulations. I have cultivated the concept of labor, the concept of safe production, and the most important thing is consciousness. Now I am thinking that when we are faced with the problem of entering the society and about to get employment, the employment unit will not ask us to do a good job like teachers, and there will be no more learning opportunities like schools. More importantly, we need to observe and learn. If even the above conditions are difficult to achieve, then the social difficulties will be much more difficult than now.

From now on, we should face up to the difficulties of many things, and we can't spend every day like this. I will always remember this period of time, which was my lowest point and the most leisure time. No matter what happens in the future, give yourself the greatest courage every day.

The unforgettable memory brought by the six-week training will be my motivation in the future, and I will choose to write down what I have learned. This is not only the professional knowledge brought by practice and simulation, but also how I should write it in my later life. Learn about yourself from the second week of training, starting with programming. From the beginning, I despised professional knowledge and thought it was very simple, but now I clearly know that CNC milling programming is not that simple to learn well, and learning a little fur is not that simple. During the training, Peng He and other three masters' dedication and rigor also made us admire.

As long as the workpiece has any shortcomings, the teacher will point it out seriously, and the teacher will show the students how to operate it again and again until the students are really clear. This spirit is worth learning from each of us. When we operate the machine tool ourselves, the teacher will watch by the machine tool. If there is any incorrect operation, the teacher will point it out in time to avoid safety accidents. I think machining training is very meaningful and practical for myself. It added a wonderful stroke to my college life. It brings me closer to the life of skilled workers, increases my professional knowledge and familiarizes me with my own strengths and weaknesses. Finally, I would like to take this opportunity to thank the two teachers for their careful teaching. Thank you for teaching me all kinds of knowledge.

Training Summary General Edition 4

Time flies, the sun and the moon fly like a shuttle. The four-week plc training has ended, but our study of plc has never ended. Although the study time is not long or short, I have really gained a lot during this time, and I have greatly improved in dealing with people and studying professional courses.

First of all, I want to talk about our professional teachers. Personally, I think he is the most responsible teacher I have ever seen. No matter from his words and deeds to his actions, I can't help but feel reverence. In class, he likes to think from our point of view. No matter whether we understand or not, we must keep talking until we understand. This shows how patient he is. Secondly, he respects the learning attitude of any classmate. No matter whether you study or not, you should be strict with yourself, don't disturb others, don't disturb the classroom order, and teach you the truth of dealing with people. Thirdly, he likes to examine our learning attitude from a professional perspective and teach us what kind of talents enterprises need and what kind of talents enterprises will retain. Whether you listen or not, you must listen, gain something and feel something. He also often talks about his thoughts and feelings in the enterprise, teaches us through his own personal experience, and convinces each of our classmates with practical examples in the enterprise that he is amiable, lovely and humorous.

Although we have been studying plc for four weeks, our study has always been based on basic learning, including Siemens S7——200 series, including the classification, composition, programming methods, precautions and so on.

1, plc consists of power supply, CPU, input, output, communication, memory, etc.

2. The classification of 2.plc is generally divided into points and shapes, in which points include small, medium and large machines; Shapes include integral and modular;

3. Programming methods are mainly based on basic programming methods, sequential instruction programming and transplantation;

4. Matters needing attention Basic rules for writing ladder diagram:

A, the coil cannot be directly connected to the left bus;

B, contact cannot be directly connected to the correct bus;

C, when programming, the top is heavy and the bottom is light, the left is heavy and the right is light. The projects we have done include the forward and reverse rotation of three-phase asynchronous motor; Star-triangle step-down starting control of motor; Transformation of circuit control of c620 and c6 140 lathes: programming of sequential control instructions for four conveyor belts; Programming the basic instructions and sequence control instructions of traffic lights; Simple lantern sequence control instruction programming and so on. The learned instructions include setting instruction, reset instruction, transfer instruction, state memory S, intermediate memory M, etc.

Among them, the most important is the programming steps of PLC;

1, I/O allocation table; +

2. Hardware wiring diagram;

3. Program editing;

Secondly, the requirements of plc control are analyzed by taking the forward and reverse conversion of three-phase asynchronous motor as an example.

1. Press the forward button to rotate the motor forward, press the reverse button to rotate the motor backward, and press the stop button to stop the motor;

2. Determine the input and output signals, and consider the reserved amount. Input signals include buttons, thermal relays, travel switches and sensors; The output signal includes AC contactor and electric lamp, but KT and KA are neither input nor output, KT is replaced by T37 and KA is replaced by M;

3. Hardware selection;

4. Input-output allocation table;

5. Hardware wiring diagram;

6, physical diagram wiring;

7. Program editing (programming);

8. Machine debugging; As novices, we often use transplantation method, also known as conversion method, which has limited application scope and can only be applied to the transformation of existing relays, such as c620, c6 140 and so on.

Training Summary General Edition 5

Standing at the foot of the Great Wall, we have endless words. Looking at the vast sea of clouds, we seem to want to say to the Great Wall: My-Chinese Dream! Looking at the looming house and the flickering dim light in the distance, do you want to shout loudly: I have a dream, a beautiful dream? This is a heartfelt cry, this is a heartfelt voice, and this is a heartfelt passion.

Under the great attention of school leaders, our CNC lathe training has achieved good results, which enables students to learn the programming theory of CNC lathes, greatly improves the practical operation ability, and enhances the awareness of safe and civilized production and enterprise.

This semester, I worked as a teaching guide for students' practice in the CNC workshop. Finish the teaching plan of internship and training at the beginning of school, and carry out internship and training according to the teaching plan. Mainly as a 15 mechanical class, a semester-long CNC lathe training task. According to the school's teaching arrangements, according to the actual situation of students to develop teaching plans and give practical guidance. So far, students' workshop training has been successfully completed. This short semester's training has made me feel the joy of being a teacher and the responsibility and obligation as a teacher. The situation and effect of this training are summarized as follows:

First, the purpose of training:

1, in order to complete the combination of theory and practical operation, improve students' communication ability with society, further improve students' ideological consciousness and practical ability, especially their practical work ability of observing, analyzing and solving problems, so as to cultivate students into high-quality skilled talents needed by society. Practical training pays attention to the use of teaching results, tests the learning effect, stimulates students' interest in learning, promotes the combination of theory and practice according to students' own conditions, and accelerates the transformation of students' theoretical knowledge into solid operational skills.

2. It is not enough to cultivate students' practical operation ability only by classroom teaching. It is necessary to move from classroom to practice workshop, because students are faced with social employment. Let students know the actual machining principle and technological process through personal practice, be familiar with the basic links of factory management, meet the machining requirements and process real parts. Understand the basic quality and requirements of a machining worker with practice, and cultivate their adaptability, organizational ability, coordination ability and working ability to analyze and solve practical problems.

As secondary vocational school students in the new era, we should keep in mind our historical mission, remember that the future of our motherland needs me, work hard to realize the great rejuvenation of China, establish a correct world outlook, outlook on life and values, improve ideological and moral cultivation and scientific and cultural cultivation, and be an ideal, moral, educated and disciplined citizen.

Second, the training effect

1. During the training period, our training guidance is based on the principle of "safety first", which strictly requires our students to pay attention to safety issues and strictly abide by the rules and regulations of the workshop market. Pay attention to safety before class, and then emphasize it in class. During the internship, no students were injured or other safety accidents occurred.

2. By directly participating in the operation process of machining, I learned practical knowledge, at the same time further deepened my understanding of theoretical knowledge, realized the combination of theory and practice, improved my knowledge of both theory and practice, and achieved the basic purpose of training. The first is to let students understand and review theoretical knowledge. Familiar with the basic operation method and programming of CNC lathe (GSK928TE CNC system), and familiar with the actual operation of CNC lathe. With the foundation of theoretical study, the operation of machine tools becomes easy to understand, which ensures that students can complete some simple practical operations by themselves within one week. With the improvement of operating skills, the entity processing will also become easier from difficult. Seize the opportunity of school-enterprise cooperation, recommend some students to produce products in campus enterprises, and enhance students' corporate awareness. With the strong support of the leaders and the joint efforts of the students, this training successfully completed the teaching practice task, and the students basically reached the intermediate level or above. This training has improved students' practical work ability, laid a certain foundation for future study and work, and gained some valuable practical experience.

3. The greatest success of this training is that each student can independently complete the courseware arrangement, and can also independently design, program and make handicraft parts. Every work is memorable to their training. Stimulate the enthusiasm for future study.

4, student internship training summary, we summarize the size every day and week. Classroom teaching and after-class communication. Through students' summary and understanding of students' attitude towards this practical training, we can see that students cherish this practical opportunity and gain a lot of knowledge that is not available in books.

The "Chinese Dream" is not empty talk, and it needs our practical actions. Ten thousand years is too long to seize the day. Patriotism should not be just empty talk, we should put it into action, so as a vocational school student, we should turn our patriotic ambition into a patriotic journey? I think there are many things we can do, such as obeying laws and regulations, which should be the minimum requirement. Learn professional knowledge well, strengthen exercise, serve the motherland in the future and work for the health of the motherland for 50 years.

Third, look to the future.

Not in one step, but in one step; It is difficult to make a blockbuster, but it is ok to do one thing well. Daily progress 1% is the accumulation from small success to great success, and it is the best way to achieve life goals. 1% progress every day is more important than every day. Go beyond yesterday every day, make progress every day and change every month. Write down the progress plus sign of 1% with your heart, so that your youth will be thick and full. Let's realize the Chinese dream with actions.

The achievements of this semester are obvious. The successful completion of the teaching arrangement is due to the strong support of the school leaders and the active cooperation of the students, so as to achieve such dazzling results. Achievements can only be the past and experience, continue to innovate in the next work, and strive for it to the next level.

Training summary of 5 demonstration articles (General Edition):

★ General template for college students' internship summary report

★ 202 1 summary of outstanding college students' personal practice general edition

★ Five Summaries of College Students' Personal Practice (General Edition)

★ Five general graduation internship summary reports.

★ 5 cases of internship experience of ordinary college students.

★ 202 1 training report for college students 1500 words.

★ 202 1 general edition of internship summary 5 articles

★ 202 1 5 general model essay for practice summary

★ After the internship, there are 20,205 general templates for personal work summary.

★ 20205 internship personal work summary general model essay.