Don’t ignore seven small cleaning details when cleaning wasteland

For every owner who has decorated a new house, cleaning and cleaning the house is not an easy task. When hiring a cleaning company to clean the land, you don't have to do it yourself, but don't ignore the details of cleaning. Now let me tell you about seven cleaning details of wasteland cleaning.

Seven small cleaning details for land reclamation and cleaning

1. Removal of decoration waste and dust removal

After decoration, a lot of decoration waste has accumulated on the ground and other places. Therefore, the first step in land reclamation and cleaning is to clear away the decoration waste in the house and remove obstacles for the next step of cleaning. Then use a multifunctional vacuum cleaner to vacuum from top to bottom, or use a feather duster to dust thoroughly.

2. Pay attention to the cleaning method of kitchen and bathroom

Adhere to the top-down principle. First, identify the material of the ceiling, whether it is PVC, aluminum-plastic board or paint, and then according to different materials Use different cleaning methods; use cleaning balls or scrub brushes to clean the walls, focusing on cleaning tile gaps and glue marks, paint spots, cement stains, etc. left on the tile surface; use towels to clean bathroom sanitary ware, and use stainless steel cleaning fluid to target various faucets , pipe fittings for cleaning; use a floor washer to perform final cleaning on the floor, especially the corners of the floor, and use cleaning balls and blades to remove contamination and cement stains in corners that cannot be washed by the floor washer.

3. Cleaning of glass

First wipe the glass frame clean with a towel, then use a water applicator to dip the diluted glass aqueous solution, and apply the glass evenly from top to bottom. Use a spatula to remove stubborn stains. Repeat the above process and scrape clean from top to bottom with a scraper. Use a dry towel to wipe off the water marks left on the frame. Use a deerskin towel to wipe off the water marks on the glass.

4. Cleaning of doors and frames

Identify the material of the door, dilute it with professional detergent, and then wipe it with a towel. The procedure is also from top to bottom. Fold the towel into squares. Start wiping from the top of the door from left to right. There must be no omissions. Glue remover can be used to treat areas with glue stains. The procedure for frames is the same as for doors; there must be no omissions and no dead ends.

5. Floor cleaning

After everything is done, the last step is to clean the floor. Before cleaning, you need to distinguish whether the floor is wooden floor, ceramic tile or stone, and choose a special detergent to dilute and clean according to the material. Glue stains on the ground can be removed with a blade, and stubborn ones can be treated with glue remover; as for the skirting lines, they can be wiped with a towel, and various glue stains, paint spots, etc. can be removed with a blade.

6. Cleaning of corners

(1) Sliding door tracks and window tracks

The tracks and window tracks under the sliding door are more likely to retain construction waste and In a dusty place, repeated pushing, pulling, and opening and closing of doors and windows without cleaning for a long time or without thorough cleaning may damage the opening and closing parts, causing problems such as jamming or poor opening and closing.

(2) Inside and top of the cabinet

When installing the cabinet, a large amount of dust will be generated due to polishing the stone surface of the cabinet. Although it was cleaned once after installation, it will not be cleaned during the land reclamation and cleaning. When a more delicate cleaning is required.

(3) Corners of glass and mirrors

Remember to completely remove fingerprints and water marks from the corners of glass. In addition, the corners of indoor and outdoor window frames, window sills under bay windows, etc. should also be cleaned with emphasis.

7. Protect before cleaning

(1) Protection of valuables

In addition to hoping that the cleaning staff they choose can perform their duties, the owners themselves also need to have Some protection awareness, we must keep and protect some fragile items and valuable items in the house.

(2) Lamp protection

In order to avoid damage during cleaning, cleaning companies usually do not clean the lamps. However, although the lamps will not be wiped during cleaning, do not forget to protect the lamps to prevent dust swept from the walls, floors, and ceilings during cleaning from contaminating the lamps. This is especially true for crystal chandeliers and lamps with upward lampshades. important.

(3) Floor protection

When cleaning, you need to prevent the wooden floor from being scratched, and take some protective measures, such as laying cardboard on the floor. Also avoid spilling water on the floor when cleaning other parts.