What thread is used for beading?

question 1: what line is commonly used for beading? fishing line

when detecting fishing line, first check the flatness, resilience and softness of the line body by feeling. Observe whether the transparency of the line is consistent in a bright place, and then measure the diameter and tension of the line. If the line diameter and tension are not much different from the specified values of this label, the line diameter does not exceed positive 1% and the tension does not exceed negative 1%, the line is still acceptable (there is no fishing line thinner than the label and larger than the standard tension on the market).

when purchasing fishing line, it is best to actually test its tension. The method is to put the spindle in a cloth bag, tie the thread and lift it. The weight of sand when the thread is broken is the actual tension of the thread, which can be compared with the calibrated standard to judge whether it is qualified or not. In addition, knead the thread into a ball and squeeze it with both hands. After loosening, see if it can automatically recover in an instant, and quickly recover without wrinkles, which shows that the thread is flexible. At the same time, we should also observe whether there is any hard injury or looseness. If it is a colored thread, twist it by hand to see if it fades. After inspection, as long as you find signs of defective products, don't buy them.

Question 2: What string should I use for bracelets? Look at the article I turned before. I

Choose rope

Let me talk about choosing rope first. In fact, the choice of rope can be completely solved by Taobao, with an average of more than ten pieces per roll, which can be strung for several years. . There are three kinds of basic ropes, with different users, colorful ropes, plain ropes and elastic ropes. Literary fans:

multicolored rope

Many literary fans like Tibetan feeling and this kind of rope, which is generally suitable for long strings, 18. If you make it into a bracelet, you need to tie a flat knot yourself for tightness when wearing it. The flat knot meeting will be said later.

plain rope

generally, there are two kinds, one is elastic, and the other is not. The elastic string is used on 18, such as the string of 18 of lobular rosewood, and it can also be used without elasticity. Donkey kong's bracelets also generally use this. In fact, this plain rope has a wired surface, which is better than elastic rope.

question 3: what thread should I use for the beaded bracelet? If you don't stretch (for example, with a magnetic head buckle or a lobster buckle), most of them use fishing lines, which are good or bad, and the good ones can be very thin and continuous.

There are two main types of elastic lines, namely transparent and opaque, which are also called crystal lines. Stretching is relatively not as good as opaque, and opaque colors are more available. It can be stretched for a long time and needs a needle. It is relatively common.

Copper wires are suitable for wearing small ornaments.

Question 5: What does "passing a bead with a thread" mean? "Passing a bead with a thread" means that when we are beading, there are two threads, one of which is used for adding beads, that is, beading, and the other thread passes through a bead in the adjacent circle, which plays the role of interlocking rings. This is called passing a bead.

If the landlord is still unclear, you can continue to ask me, and I will solve the problem for you.

Question 6: What basic materials do you need to prepare for handmade beading?

1. Common tools:

1. Pliers (the most important) pointed pliers: flat-headed pliers with round head (for making loops): diagonal pliers for finishing metal wires: cutting.

2. Scissors and nail clippers are generally used to cut fish threads, which are the basic tools for beading. Nail clippers are used to cut off redundant threads, and some gaps are too small, so this will do.

3. Tweezers: they are often used when making exquisite ornaments, and they are used to hold tiny beads and parts.

4. Round needle-nosed pliers: wound with copper wire or T-needle.

5. Double finishing hammer: the hammer with rubber-plastic head will not wear the surface of metal wires, and can be used to hammer metal wires straight, especially copper wires and aluminum wires.

6. Needle-nosed pliers: the most commonly used pliers, used to install positioning beads and adjust metal fittings.

7. Super adhesive: used for fixing and sticking the thread knot.

8. Soft ruler: used to measure the length of bead chains and lines.

9. Hot-pipe glue gun: used in conjunction with adhesive tape, for large-area pasting.

1. Lighter: it is a common tool for sintering.

2. Common wire:

1. Copper wire: various colors, mainly gold and silver. There are two kinds of thickness: thick and thin. As the main bracket of jewelry, you can also make your own super-long 9-character needle. The effect is super fine. It is used to weave small flower pieces and the like.

2. Steel wire: multiple strands of thin steel wire in the middle and a layer of plastic skin on the outside. Usage is similar to that of copper wire

3. Fish line: generally used for small beads within 5mm with .25mm string, and thick beads with .5mm string and about 1mm string

4. Elastic line: equivalent to "rubber band" used for bracelets and necklaces, which can be directly knotted without pressing buttons, which is very convenient

5. Jade line: used for knitting jade chains. You can also make the rope on the mobile phone pendant. 6. All-cotton wax thread: in addition to the all-cotton thread, add a thin layer of wax, which is very strong and durable. 7. Leather rope: colorful, basically domestic

8. Polyester thread: also known as Baota thread, which is mostly used in the clothing industry. It is man-made fiber, which is very strong, mainly for fixing beads on clothes and bags. Various colors and transparent ones are most commonly used

III. Other tools

1. Beaded needles: different from household ones, especially long, specially designed for beading

2. Crochet needles: some styles are knitted with crochet needles (thin copper wires are used as wool, and various beads are put on in between, which has a special flavor)

3. Glue: AB. You can use it as soon as you heat it with fire

4. DIY accessories:

connecting chain, hair pin and wallet clip, brooch holder, hair clip holder, shell buckle, ear clip and ear hook, drill spacer, chain buckle, 9-pin, T-pin and small round iron ring, hair clip, various metal chains and corresponding buckles, key ring and mobile phone chain buckle, melon seed buckle and pendant buckle. Frequently asked questions:

1. What materials and tools are needed for the most basic beading?

Just collect ready-made materials at home. Generally, sewing needle and thread, scissors, waste jewelry, beads on clothes, just play around, and I really like them, so it's enough to open materials.

2. What materials do you need to get started?

Depending on what you want to do, the beaded materials on the Internet can be sold at retail and purchased as needed. You don't need to buy too many tools. Generally, beading doesn't often use professional tools. If you need them occasionally, most of them can find temporary replacement tools.

3. What are the best beads to buy in daily practice?

It is recommended to buy cheaper plastic beads and millet beads with regular shapes. Don't choose too special color for the beads, otherwise it will be difficult to match. Mizhu suggests that you can choose gold, silver, black, white or colorless and transparent. These colors are easy to match with beads of other colors and belong to long-term colors.

4. There are many types of fish thread, which one is better to buy:

Generally, .2-.4mm fish thread will be used for beading. When the fish thread is to be worn back and forth in the same bead for many times, you should choose a thinner fish thread. If you only wear it once, you might as well use a thicker fish thread. Generally, it is recommended to buy .3 or .25mm fish thread, which can be inserted into 2mm millet bead holes at the same time. The same is true for choosing other types of beads. ...> >

Question 7: What is the strongest thread of the bead? First, use a very thin steel wire string for the new gold bead spacer. After grinding for a while, the holes will be smooth and smooth, and then change to elastic rope or Qianmian. As long as it's a snap for tying the Buddha's head, it's more beautiful without elastic rope.

Qian Mian is relatively strong, so it is not recommended to use leather rope. It is not as strong as you think. In summer, it will get worse when you sweat, so you can make slipknot, so you can take it in.

If there is elasticity, it is recommended to use beef tendon thread, which is divided into two types, one is domestic, and the other is relatively thin, and the export is relatively thick. It is recommended to buy thick one. The thin one can be pulled hard and the thick one can be pulled continuously. Inelastic, the most sturdy and hairless is the authentic Taiwan Province line, and the imitation is garbage. The advantage of Taiwan Province line compared with multicolored line is that it is thin and lint-free. The multicolored line passes through one strand and the Taiwan Province line passes through two strands. No matter how strong the multicolored line is, it is impossible for one strand to be stronger than others.

Question 8: How to choose the beaded fishing line:

Inelastic, generally used for beaded bracelets, necklaces and rings, mainly used for knitting, or single bead string. If you make a jewelry, you only need to string it through the bead hole once, you can choose a slightly thicker one, but it should not be too thick, generally about .4MM .45MM, if it is used for knitting, such as more complicated bracelets and rings. In this case, the beads are generally small, and when weaving, a bead hole needs to be beaded several times before it can be strong. Therefore, it is generally necessary to use a thinner thread, which is too thick. If you string it once or twice, you will not be able to use it. Generally, .2MM .25MM .3MM is enough. The fishing line of .6-1. is mainly used to make relatively large household decoration ornaments, such as beaded vases, cabbage and so on. It's best to use .7MM, and only 1.MM

crystal elastic thread

is needed for extra-large ones, which is mainly used to make bracelets. Generally, it is enough to string them once in a single hole, so it is necessary to choose an appropriate thick one. If the bead hole is small, you can only choose the right one, generally speaking, it is .5 mm to .8 mm, and the bead hole specification is relatively large. You can choose .8~1MM

filiform elastic thread

, which is elastic and has many colors to choose from. It is basically the same as crystal elastic thread, but the use method is somewhat different. The filiform thread has no specifications and can be adjusted by itself. For example, the bead hole is very thick, and the elastic thread can be folded into several folds before stringing, which is firm and elastic, but the filiform elastic thread is not so easy to string beads, so it is generally better to have a lead. That is to say, first tie the elastic thread with a very thin thread, then the thin thread passes through the beads first, and then pull the elastic thread through

Question 9: How to renew the DIY beading? You can renew the thread in advance, and you can wear two threads at the same time and get 3~4 kickbacks. Then cut off the short fishing line.

because the fishing line is willful in the beads, it will not spread.

it's not easy to hide it after knotting. if it's not hidden well after knotting, it will affect the appearance.

Question 1: What thread is not easy to break on the string of wenwan beads? Use the elastic rope with a texture similar to that of the string. Don't wear the crystal rope or the one with a trace. These two kinds of elastic ropes are not strong and have a long service life.

For 18 long strings, you can choose the one with smooth Taiwan Province thread, which is more durable.

All the ropes have a long service life, and the holes of the beads will wear the ropes. Some beads have poor workmanship.