How to install the curtains?

It's ok to install your own curtains, and it's not very complicated. The concrete curtain wall installation and construction steps are introduced:

Positioning: Before curtain wall installation, it is necessary to draw lines for positioning, and its accuracy is related to the success or failure of curtain wall installation. First of all, measure the distance between the fixed holes and the size of the required installation track, so as to facilitate the preparation before construction.

Installation of curtain rail: curtain rail can be divided into single rail, double rail or three rail. When the width of the window is greater than 1200mm, the curtain rail should be disconnected, and the bending at the broken part should be staggered, with a gentle bending curve and a lap length of not less than 200mm. Ming curtain boxes are usually equipped with rails first.

Install the elevator, rotate the elevator 90 degrees to connect with the track, and install the elevator on the top plate with self-tapping screws. If it is a concrete structure, it is necessary to add expansion screws.

Installation of curtain rod: (1) Adjust the connecting fixture, install the rod or wire and pull it on the fixture. Do level off, consistent with the room elevation. (2) Install standard curtain track (double track), and its foundation width should generally be above 15CM.

Position adjustment: For floor-standing curtains or curtains hanging on the table, the width of the window sill should be allowed when installing the track to avoid unsightly curtains hanging down.