What should I pay attention to when removing professional indoor ceiling?

How to remove the integrated ceiling? Its disassembly is very simple, as long as it can be completed through three small steps: suction, pull and disassembly. Usually when you buy it, you will be equipped with a sucker, which is for disassembly. Gently put it on the board to suck away the air. First, hold one corner tightly, then pull hard to pull the four corners apart, and the whole board can be removed.

After the outer plate is removed, the internal structure can be seen, which is more convenient for cleaning. Auxiliary keels for edge sealing are installed around each board, and the auxiliary keels have the function of connecting modules and light steel keels. After assembly, just press gently along the keel and pay attention to the position of the ceiling with different patterns.

2. Remove the aluminum gusset ceiling

There are two kinds of aluminum gusset plates in the aluminum gusset plate ceiling: square and strip, and suction cups are needed to remove the square. Stick one corner of the square with a suction cup, and then pull one corner of the aluminum buckle plate up. The other three corners can also be removed in the same way.

It is troublesome to disassemble the strip-shaped aluminum gusset plate, mainly because it is pressed one by one during installation, and the last one will probably have a small crack of 0.5- 1cm. When dismantling, start from the edge strip, and the edge strip and tile will be fixed with glass glue, so it is necessary to cut the edge strip and tile. Find the last gusset plate, use a flat-head screwdriver or a thin long iron sheet to draw along the glass glue several times, then insert it into the gap of the edge sealing, gently pry it open, and then disassemble it from the edge in turn. Pry the middle first, and the two sides are easy to pry and deform.