I would like to ask if the painter did not finish the primer during the renovation. Is there any way to remedy the situation when doing the topcoat?

It is difficult to make water-mixed paint the same as the ones on the market...

The finished water-mixed products on the market are machine-processed. The flatness and smoothness are very good...

It is difficult to achieve the above effects with hand-mixed water paint. If you need to repair or rework, you can scrape it off and redo it... If it is thickened...!!@## Sweat, it will become shelled or cracked in the future

Water type. Uneven? It is usually a decorative panel. Unevenness and pits should be caused by the following conditions:

1 When cutting the panel, the skin is torn, or some edges are rough. It means that the quality of the panel is not good enough. You will know it by looking at the back of the panel. It looks like broken wood. It does not have the same overall texture as the front.

.This board is very brittle. When cutting, the edge may become rough if you cut it with a knife.

2. The process is different,

When the decorative panel is used as a door cover Some people use all-purpose glue to paste it... It is very strong, but the smell is very strong, formaldehyde... Hey~~ Do you think it is too high?

Generally, white latex is used,... After applying it, leave it for a while It will stick on, it is firm and no problem.. There is no smell.. It is more versatile.. The price is more expensive than all-purpose glue.

After sticking it on, someone wanted to save trouble and directly nail it on with a nail...the nail opening is large. .The impact is strong and it is easy to damage the surface smoothness. Although it can be filled with putty, the holes are large and will be obvious when you finish the painting later.

>Usually used pattern nails, the nails are small and will not damage the surface. If you can find it after painting, hehe. I suggest you be a detective...

Clear water is not easy to change..Mixed water is better. ..It is recommended to do less water mixing in the future...

If the paint is repaired and it still feels bad...removal is probably impossible..The workers will die if they don't die..If it is elsewhere, For example, it's a countertop... It's full of holes. The backlight is ugly, and it's in the living room. If they don't remove it, I suggest you ask workers to apply the skin. There are some in the market... Applying the skin to the paint will improve it. It's very big.. Haha, I have encountered this kind of thing. But I suggest that if it is not very obvious, it is very obvious. Don't post it.. It will take a while for the house to be built, and it is impossible not to renovate it for ten years. Haha, pay more attention in the future. It would be perfect if you have a knowledgeable friend to help you...