Where is the switch for Santana's far and near light?

The operation method of automobile far and near headlights is as follows:

1, headlights generally have low beam and high beam.

2. There is a set of light combination switches on the left side of the steering wheel. At night, when the combination switch rotates forward, turn on the dashboard light, and when it rotates, turn on the low beam light. (Each brand of car combination switch is different, but it is the same, and there are graphic arrows, which are very convenient to operate. )

3. Turn on the low beam when there are street lights on the road at night, turn on the low beam when there are pedestrians on the roadside at night, and turn on the low beam at the corner of the narrow road and narrow bridge.

4. Turn on the high beam at night when there is no street lamp on the roadside or the road is straight and far, and the high beam rotates forward.

If you turn on the high beam when you meet a passing car at night, you must turn off the high beam and wait for the passing car to finish. If you don't turn off the other side, your high beam will shake and affect the driver's sight. Accidents may happen, which is also the standard of civilized driving.

6. When you meet an intersection at night, you need to change the distance light twice, but it is not convenient to rotate back and forth all the time. It doesn't matter whether this combination switch has shortcut keys or not. When you lift the combination light switch in low beam mode, you can turn it into high beam, and then release the combination light switch to reset it to low beam. This is very simple and convenient, and it is used to change lights when you meet an intersection at night.