What should I do if the radiator vent is not ventilated and drained?

What should I do if the radiator vent is not ventilated and drained?

1. First, judge that the vent may be blocked. Poke the vent hole with a needle and pay attention to catch the water with the washbasin. Connect the connector after the water flows. 2. Then open the radiator inlet valve, and close the valve when water enters. 3. Open and close all radiator valves in turn according to the above method until all radiator inlet pipes are filled with water.

The radiator does not exhaust or drain, which means that the exhaust hole is blocked and should be dredged immediately. In addition, because there are many types of radiators, the water outlet time is different, which is about 5- 10 minutes. In addition, the radiator must stop running to discharge.

How to use radiators to save energy;

1, you want to save energy when using radiators. When going out, you can adjust the thermostat to a low temperature, which can not only keep the indoor temperature and humidity, but also save energy.

2. Secondly, when using the radiator, it should be adjusted scientifically to achieve the purpose of energy saving. When using, the number of opening and closing doors and windows should be reduced as much as possible. Don't hang clothes on the radiator and don't use a dust cover, so as not to affect the heat dissipation of the radiator.

3. Finally, when using the radiator, after taking a rest at night, the indoor temperature should not be adjusted too high, and it is better to control it at 16- 18 degrees, which will make people more comfortable. If the temperature is too high, it will make people dry, dizzy and itchy, and increase energy consumption. In addition, rooms that don't live for a long time can be set at about 8 degrees, which can not only achieve the anti-freezing effect, but also save energy.