What stalks carry gas?

The person who gives gas is the person who can contact each other when the gas in your family is gone. That's what the other side did. In fact, he is a gas worker. Such people actually work hard, because people who breathe gas will breathe gas to different people every day.

Will you still live on the fifth floor? Well, in some old communities, if there is no elevator, you have to climb stairs. In this case, it will be very hard work.

Management of gas tank

The design of gas station building must meet the requirements stipulated by the state. Gas-making equipment should adopt products produced by professional manufacturers, which are safe, reliable and complete in technical information. The fire hole cover of the gas producer should be tight, and the fire hole and coal feeding device should be airtight and intact.

Control valve and check valve must be set on the gas generator inlet pipeline, which should be flexible and reliable, and explosion-proof valve and safety valve should be set at the end of the pipeline. Water seals at all levels of the gas producer, such as the maximum pressure relief valve, double risers, furnace bottom, etc., should maintain an effective water level and overflow normally.

Gas purification facilities should be kept in a good purification state, and the import and export of electrostatic precipitator should be equipped with reliable partition devices.

When the oxygen content of water gas and semi-water gas reaches 65438 0%, the boiler must be stopped. The safety device of the steam collector should be complete and effective. The steam collector shall be equipped with automatic water supply device.

Gas-making equipment should adopt products produced by professional manufacturers, which are safe, reliable and complete in technical information. The water quality of gas producer with water jacket should meet the specified requirements.

Control valve and check valve must be set on the gas generator inlet pipeline, which should be flexible and reliable, and explosion-proof valve and safety valve should be set at the end of the pipeline.