How to operate double-sided printing

After installing the printer driver. Set in the printer settings property page, as follows

1. Click the desktop control panel to select the model, as shown in the figure below.

2. Select the type of device and printer, as shown in the figure below.

3. Select a printer that can print on both sides, as shown in the figure below.

4. Right-click and select "Printer Properties", as shown in the following figure.

5. Pop up the printer property page, and click "Preferences" on the general tab page, as shown in the following figure.

6. In the pop-up property page, click the "Binding" tab and check "Duplex Printing", as shown in the following figure.

7. Set double-sided printing to Yes, Flip, and the default setting is None, as shown in the following figure.

8. After completing this operation. The printer can print on both sides normally, as shown in the figure below.

Extended data:

Preventive measures for printers

1. If the printer has fever, smoke, peculiar smell and abnormal sound, please cut off the power immediately and contact the information officer.

2. It is forbidden to place other items on the printer. Please unplug the printer from the power outlet when it is not used for a long time.

In case of thunder nearby, unplug the power plug from the socket. If the power supply is plugged in, the machine may be damaged.

4. Printing is prohibited when printing paper and ribbon box are not set. The print head and print roller will be damaged.

5. The temperature of the print head is very high. Don't touch it until the temperature drops. Prevent burns and injuries.

6. Do not touch the metal parts of the print cable connector and the print head. Do not touch the print head while it is working.

7. When the print head is working, it is forbidden to cut off the power supply.

8. Do not disassemble, move or drag at will. If there is any trouble, please contact the information officer.

9. Foreign objects (staples, metal sheets, liquids, etc.). ) Do not enter the machine, otherwise it will cause electric shock or machine failure.

10, the printer can only be turned on when the power supply is normal and the data cable is connected to the computer.

1 1. Please do not move, drag or turn off the printer when printing.