The key is broken in the keyhole. How can I take it out?

I will share these tips with you today to make it easy for you to open the door.

1. The key is broken in the lock. If you know your neighbors well, pick up a hammer or a hammer from them. If you can't guarantee safety, borrow one from the property management office. Then gently tap the lock seam with a hammer, trying to get the key back to its original position and open it with the remaining half.

This principle is actually to use inertia to make the key slide outward when the hammer hits the door lock. If the key card is shallow, then the key stuck in the door lock will be pulled out slowly, and it can be taken out with tweezers when it comes out.

2. If the lock of the door at home is a cross lock, this is relatively difficult to take because the card is tight. At this time, we should first handle the tunnel, prepare a small electric drill, then install the smallest electric drill, and then walk around the place. Make a few holes to enlarge the keyhole slightly, so that we can take it later.

Then we prepare a steel wire and coat it with 502 glue. Then insert the steel wire, wait a few minutes, and when the glue is dry, pull the key with the steel wire and you can take it out.

3. If your door lock is flat and the key is broken in the keyhole, you can use a single hook specially used to open the door to go deep into the lock and hook out the broken key with a single hook. But if it is not broken in the hole, but rather long, we can use a small steel wire, then put it in and hook the key, and then pull it out with great force.

Of course, if this method still doesn't work, we will put some lubricating oil in it and try to pull it out.