The reputation of mobile phone film, there is a joke that the career of mobile phone film is very high, how to say it?

1, polymer composite linear treatment on the surface of intelligent high-end digital communication equipment.

2, knowledge extension: how to film, clean the screen, wipe the screen with BG cloth, and thoroughly clean the screen of the mobile phone.

3. Tear off a part of the release film. 1 Observe the label on the protective film and tear off a part of the release film marked with "1".

And pay attention to avoid fingers touching the adsorption layer of the protective film. Each protective film product is divided into three layers,

Where 1 and 2 are release films to protect the protective film in the middle.

4. Align the adsorption layer of the protective film with the corners of the screen to ensure the alignment, and then paste it carefully.

When pasting, tear off the 1 release film. If bubbles appear during pasting, pull the film back and paste it again.

After confirming that the position of the adhesive film is completely correct, completely tear off the release film number. 1. After the entire protective film is attached to the screen,

If there are still bubbles, you can scrape the screen with BG card to let the air out.