What are the safety protection measures for inkjet printers?

As far as I understand the inkjet printer, it should use ink and thinner.

At the inkjet head, an air suction cover should be installed. The more closed it is, the better. However, it is necessary to consider that the wind speed will not affect the inkjet effect, and the wind speed of the air suction port should be checked regularly to prevent the air duct from being blocked; There should be no heat sources or hot work around the place where the ink machine is installed; no more than one day's worth of ink and thinner should be stored on site, and the temporary placement should be at a certain distance (at least 5 meters) away from the equipment; ink and thinner should be placed centrally Pay attention to fire and moisture prevention in the place, and it is best to set up a special chemical warehouse; when operating the inkjet machine, workers should wear activated carbon masks and wear them properly; because ink and diluent contain MEK, which is harmful to the human body, workers must Special physical examinations are carried out before, during and before leaving the job. Therefore, workers must be assigned positions and people, and personnel without special physical examinations cannot be allowed to perform temporary operations. Before operating, workers must receive on-the-job safety training, including operation, cleaning, repair, maintenance, MSDS of ink diluent, and emergency measures to be taken after contact with ink diluent; protective glasses and eyewash facilities must be installed on site.