What does the woodworking project in the decoration project mean?

Educate all operators on finished product protection, and post propaganda slogans on the construction site, so that operators can firmly establish the consciousness of finished product protection. Strengthen the macro-management of the construction site, and reasonably arrange the interpenetration of working procedures to avoid mutual pollution and destruction caused by unreasonable working procedures.

? After the processed semi-finished products enter the construction site, they should be stored in the warehouse, ventilated and moistureproof, and managed by special personnel. During floor construction, the surrounding walls must be protected, the floor drain should be blocked with woven cloth wedges, and the ladders and trolleys entering the building should be wrapped with rubber leather.

The lower part of the wooden door frame is protected with iron sheet, and the bottom of the door leaf is blocked with wooden wedge to prevent the free switch from being damaged. At the entrance and exit, protective measures should be taken in time for the completed work, such as nail protection strips, nail corner protectors, nail corner protectors, nail plastic films, etc., and special personnel should be appointed to take care of them. Formulate a detailed and reasonable process handover system, implement the responsibility of finished product protection to people, formulate corresponding reward and punishment measures and strictly implement them. ?

In order to ensure the accumulation of information, all kinds of acceptance, examination and visa must be filled in carefully. Synchronize with the project. Strengthen the management of finished product protection of materials-measures such as protection, packaging, covering and sealing. Establish finished product protection measures and organizations, which shall be the responsibility of the project manager and attended by the builder and construction team leader;

Establish a finished product handover system; Scientifically organize construction, reduce cross-work and avoid concentrated attack; Take practical treatment methods. The finished product protection method aims at different sub-projects. The marble floor is covered with felt cloth, plastic cloth and cotton blanket; In order to avoid procrastination on the floor, it is forbidden to establish finished product protection measures. Organizationally, the project manager is responsible, and the builder and construction team leader participate;

Establish a finished product handover system; Scientifically organize construction, reduce cross-work and avoid concentrated attack; Take practical treatment methods. The finished product protection method aims at different sub-projects. Stop walking or working on the floor, don't wear metal spikes, don't scratch or knock on the floor with hard objects and sharp instruments, and use wooden mats appropriately; Angle iron is used for stair tread, and fiberboard is laid; Aluminum alloy and stainless steel cylinder are bound by vertical plates and plastic sheets;

Aluminum alloy doors and windows are pasted with plastic strips, and subsidies are given in time after opening the glue; Before the wooden dado is painted, it should be protected with wooden nails; After the surrounding oil pollution work is carried out or completed, there shall be no dust or hand pollution in indoor construction, and cover and seal measures shall be taken; The ceiling is sprayed with mud first, and then pressed with lights; The completed project shall be clean, free of dust and sundries, and temporarily closed without unattended before handover; Wood products, furniture and other supporting furnishings should be wrapped in carpets and soft foam plastics to be waterproof and fireproof.