Year-end summary of chemical plant maintenance personnel

#WORKSUMMARY# Introduction Through summarizing, people can upgrade scattered and superficial perceptual knowledge into systematic and profound rational knowledge, thereby drawing scientific conclusions in order to correct shortcomings, learn lessons and make use of In future work, there will be fewer detours and more results. The following is the "Year-End Summary of Chemical Plant Maintenance Personnel" prepared for your reference.

Chapter 1

Time flies, and the year of xxxx is at the end of the year in a blink of an eye. Looking back on the work history of the past year, under the correct leadership of the company and the branch factory, and with the support of the chemical and packaging sections, all employees of our maintenance team worked together and worked hard to successfully complete all tasks assigned by the company and branch factory. Maintenance work. It has achieved 100% completion rate of technical transformation projects and 100% completion rate of daily maintenance work, making significant contributions to the company's goals.

The current employees in the maintenance class of the ammonium nitrate branch are young people under the age of 15, and the proportion of young workers accounts for %. Among them, there are people with a bachelor's degree, people with a college degree, senior technicians, and technicians. The entire team is mainly composed of youth, education, and multi-faceted, and is always full of vigor and youthful vitality!

In the past year, we have mainly done the following work:

1. Safety

In addition to strictly abiding by We must carefully study the company's and branch's rules and regulations, carefully study the company's safety reports, always adhere to the policy of "safety first, prevention first", and provide safety knowledge training for employees. The following points have been achieved in terms of safe production: first, ideologically recognize the importance of safe production; second, improve maintenance technical capabilities and be familiar with the safe operating procedures of various equipment; third, carry forward good unity, cooperation and The spirit of mutual supervision. Therefore, we can only correct our ideological style, establish a sense of responsibility that "safety is more important than Mount Tai", and master safety professional knowledge. Only then can we take all safety precautions. Our maintenance personnel work in flammable, explosive, high-temperature, and corrosive places, so there are dangers at all times. Therefore, we not only need unity and cooperation in our work, but also the support and supervision of colleagues.

In xxxx, with the joint efforts of our maintenance personnel and the supervision of the chemical and packaging sections, the safety situation of the team has achieved remarkable results, and the team has achieved overall safety "Zero Accident" in 2016, there was no safety accident involving minor personal injury or more.

2. Production

Inspection work: Our maintenance team has formulated a detailed inspection system and implements the management concept of "everyone is the owner of the equipment". In large equipment Implement segmented responsibility for vulnerable equipment, so that equipment and responsibilities are assigned to people. During the inspection, our maintenance team will give certain rewards to employees who find equipment faults. Therefore, during the morning inspection, our maintenance personnel use their ears to listen to whether the equipment is abnormally loud or noisy, and use their eyes to observe whether the equipment is damaged. , loose, use your hands to feel whether the equipment is high in temperature, lacks oil or vibrates. Therefore, our maintenance personnel use their keen eyes, ears and hands to provide a strong guarantee for the normal operation of the equipment.

Daily maintenance work: Under the leadership of the equipment factory director and maintenance squad leader, our maintenance team carries forward the spirit of hard work and skillful work, so that daily maintenance work is carried out in an orderly manner and various maintenance tasks are completed excellently . In the hot summer, our maintenance personnel drilled into the porous section to weld cracks in the drum dryer where the temperature was as high as 50°C. Every time the welding was completed, our maintenance personnel felt as if they had taken a "sauna bath" and their whole bodies were wet. over. Our maintenance personnel overcame many difficulties in flammable, explosive, corrosive and other harsh environments to dismantle and inspect the neutralizers in the powdered salt section according to quality and quantity. Under the circumstances of tight time and heavy workload, our maintenance personnel carried forward the spirit of hard work, unity and the style of rushing to do, rushing to do, and independently completed the disassembly and reassembly of the wrapping machine in only 9 days, providing equipment Long-term operation provides a strong guarantee. Our maintenance personnel not only have excellent skills, but also have an excellent style of being able to endure hardships and fight, which has brought the work of the ammonium nitrate branch plant to a new level.

Technical transformation project work: Our maintenance personnel closely focused on the company's development plan and based on the requirements of the company and the branch factory, formulated a thorough technical transformation plan, and completed the tasks with quality and quantity, so that the branch factory The technological transformation is carried out in an intense and orderly manner.

Under the leadership of the company, our maintenance personnel independently completed the 1# centrifugal exhaust fan and 4# blower in the porous section, which increased the output of the porous section from the original 80 tons/shift to the current ton/shift. In the packaging section, our maintenance personnel installed a new warehouse horizontal belt, which increased the warehouse's storage capacity and facilitated subcontracting. In the powdered salt production section, we installed two more vacuum pumps and completed technical renovation projects such as improving the crystallizer door, which increased the output of powdered salt from the original h/m3 to the current h/m3. Our maintenance personnel have made their own contributions to the development of the company in the spirit of being dedicated to their jobs and loving what they do.

3. Energy saving and consumption reduction and on-site sanitation management

Our maintenance team has a deep understanding of the company’s spirit of energy saving and consumption reduction, and actively responds to the company’s slogan, starting from “Save one bolt, one bolt.” Starting from "cap, one gasket", we strive to reduce costs, reduce energy consumption and save materials for the branch factory. Our maintenance team is strengthening team management and advocating a frugal policy of no extravagance and no waste. On the premise of meeting production and safety requirements, the use of waste steel pipes, valves, elbows, etc. saves materials for the company and branch factories, improves the company's energy usage, and reduces the company's operating costs. After the maintenance team completed the work on site, they met the requirements of "complete the work, use up the materials, and clear the site" and cleaned up the site in a timely manner to make the site look clean and beautiful. In the maintenance team, we hold ourselves to high standards, insist on cleaning every day, and do not litter or litter, so that our maintenance staff can always be in a clean and warm environment.

IV. Team activities

Our maintenance team actively and proactively participates in various collective activities of the company and branches, and carries out mutual learning in the maintenance team to improve employees' Technical ability and overall quality. Our maintenance team actively participated in the employee air volleyball competition held by the company and helped the branch achieve the excellent result of "third place". Our maintenance team was optimistic and took the initiative to participate in the "Celebrating the National Day and Welcome the Mid-Autumn Festival" barbecue event held in the branch factory. We had close conversations with the chemical and packaging departments to build a good relationship and lay a solid foundation for future maintenance work. At the same time, our maintenance team itself also carries out learning activities to learn from each other and promote each other, bringing the skills of our maintenance personnel to a new level.

5. Future Prospects

The new year means a new starting point, new opportunities and new challenges. We will review the correct style of our team and carry forward unity, mutual assistance, hard work and tenacious struggle. spirit, welcome new maintenance and technical transformation projects with an optimistic and positive attitude, complete the work satisfactorily with excellent skills, and make contributions to the company and branches. Chapter 2

As winter comes slowly, another year of work in the maintenance team is coming to an end. Looking back on the past year, with the care and support of the leaders, the colleagues in the team are helping each other. , the work is carried out relatively smoothly. As a maintenance worker in the engineering department, you must first improve your own skills before you can work better. In order to take your skills to a higher level, I will now summarize my personal work over the past year so that I can better carry out next year. work.

1. Go to the site to learn more about the operation of the equipment

As a maintenance worker, you are faced with the characteristics of a wide maintenance area and many points in the reservoir area. When understanding the repair and maintenance of various equipment, At the same time, it is even more important to be able to directly grasp the real situation of on-site operation of the equipment. As the equipment ages and wears out, only during operation can the health status of the equipment be understood, and potential faults that will occur can be eliminated in advance to prevent problems before they occur. By understanding the operation of the equipment, we can carry out targeted maintenance work, thereby extending the service life of the equipment, reducing production and maintenance costs, and ultimately improving corporate efficiency to the maximum extent.

2. Be good at keeping good records at work

In daily work, I advocate good interaction between equipment maintenance personnel and production operators, and strive to achieve early detection of equipment defects and timely maintenance , fully understand the characteristics and lesions of each piece of equipment, so as to facilitate rapid and predictable equipment maintenance work, and focus on tracking vulnerable and consumable parts and promptly report spare parts inventory to the team leader. Not only that, I keep records of the model parameters of commonly used tools such as bearings, belts, water pipe fittings, filters, water pump seals, etc. that are replaced during the maintenance process, and report them to the team for archiving so that maintenance and replacement can be made more timely and quickly.

3. Do a good job in equipment maintenance

During this year, I performed maintenance on storage tanks, screw pumps, centrifugal pumps, electric single-beam cranes, mixers, oil transfer arms, and landing equipment. Various major equipment such as boat ladders have undergone comprehensive secondary maintenance, timely repairs have been carried out for burst water pipelines, and various maintenance matters arranged by the department have been satisfactorily handled, which has contributed to the low failure rate of the company's equipment throughout the year. A small amount of power.

IV. Aspects that need improvement in skills

By improving our own maintenance level, we strive to save money on equipment maintenance costs, such as disassembling and repairing damaged and expensive parts. The repair work is meticulous down to the components, narrowing the scope of the fault, repairing the equipment with the lowest maintenance cost, and avoiding direct replacement of new spare parts.

For equipment maintenance, ensure the performance of the equipment by changing the maintenance frequency and reduce the impact of failure and outage.

5. Pay attention to safety work

This year, we have actively prepared for the various exams organized by the company and studied before the exams. Always keep safety in mind and keep in mind the particularity of oil depot work. Eliminate safety hazards and eliminate habitual violations.

In summary, as a maintenance worker in the company’s engineering department, I have the responsibility and confidence to continuously strengthen my studies, improve my maintenance skills, work truthfully and actively around the annual goals set by the company, and fully cooperate with the team and department work, at the same time, strengthen cooperation among colleagues, improve mutual collaboration capabilities, and make the team department more united and more combative. In future work, I believe that I have the ability and confidence to face difficulties and face difficulties bravely under the leadership of department leaders. Meet the challenges, constantly improve yourself, and keep moving forward in the new year! Chapter 3

Time flies, and XX has passed in the blink of an eye. We have ushered in a new year, a new year, a new beginning, and also new challenges and opportunities. Looking back on the past year, I have a lot of emotions. The past XX years were an important year for the company. During this year, the company's scale has been improved. The second phase of the project was successfully completed and officially put into operation. The third phase of the project was officially put into operation. Phase 1 construction has started smoothly. Also in the past xx years, it was a busy and fulfilling year for me. At the end of the year, I would like to report on my personal work last year as follows:

1. Safety

Our instrument maintenance personnel work in flammable, explosive, and high-temperature places, so there are dangers at all times. As a maintenance personnel, in addition to strictly abiding by the company's rules and regulations, I also carefully study the company's safety Education, always adhere to the policy of "safety first, prevention first", and actively participate in safety training for team members. Every safety homework book is written strictly and responsibly, and we have also achieved safety in production. , ideologically aware of the importance of safe production; improve maintenance technical capabilities, familiar with the safe operating procedures of various equipment and workshop process; carry forward a good spirit of unity, cooperation and mutual supervision. I have corrected my ideological style, established a sense of responsibility that "safety is more important than Mount Tai", mastered safety professional knowledge, truly responded to the company's call to achieve safe production, and took all aspects of safety precautions.

2. Production

Inspection work: In the middle of xx, the workshop leaders formulated a strict inspection system for us, focusing on prevention and combining maintenance with guidelines, and The equipment in each workshop is divided into responsibilities, and the equipment and responsibilities are assigned to each person. Achieve timely discovery of instrument problems in each device during the inspection process, deal with them in advance, and repair them in a timely manner.

Daily maintenance:

1. In terms of maintenance and transformation, my daily job is to maintain and repair the second phase and the hydrocoking unit to ensure that each unit can operate smoothly and normally. In winter, check the heating of each device in advance, repair and replace damaged heating pipelines, insulate instruments in winter, eliminate leakage points in pressure pipes, repair and perform anti-freeze and anti-condensation work on on-site transmitters, and perform anti-freezing and anti-condensation work on regulating valves. The valve positioner air line removes water accumulation and other work. In his spare time, he also helped colleagues lay and thread cables and install instruments during the second phase of renovation. Help supervise debugging, find problems and shortcomings during the installation of equipment and instruments, and report them to the team. The team will collect all problems and negotiate with the construction unit to solve them to ensure that all links are safe, stable and effective. DCS configuration will be rectified and verified to find out the problems. Problems should be reported to the leader in a timely manner.

2. In terms of energy saving and consumption reduction and on-site sanitation management, we deeply understand the company’s energy saving and consumption reduction spirit and actively respond to the company’s slogan, starting from “saving a bolt, a nut, and a gasket” , strive to reduce costs, reduce energy consumption and save materials for the company. Our instrument class has strengthened team management and advocated a frugal policy of no extravagance and no waste. On the premise of meeting production and safety requirements, the use of waste copper pipes, valves, etc. saves materials for the company, improves the company's energy usage, and reduces the company's operating costs. After the on-site work was completed, the requirements of "work completed, materials used up, and site cleared" were also met, and the site was cleaned up in a timely manner to make the site look clean and beautiful. In the instrument team, I hold myself to high standards, insist on cleaning every day, not littering and waste materials, and do a good job in classifying various materials to facilitate

finding and using them, which also makes us The instrument duty room is always in a clean and warm environment. Of course, no one is perfect, and no gold is perfect. I still have many shortcomings. My work experience needs to be improved. My understanding of relevant professional knowledge is not detailed and substantial enough. I still need to continue to learn to improve my professional level and strengthen my ability to analyze and solve practical problems. For these I will humbly learn from the colleagues around me in the days to come, ask if I don’t understand, take notes, work hard to enrich myself, enrich myself, constantly cultivate and improve my work ability, and at the same time, I will also accept more suggestions and suggestions from leaders and colleagues. Criticize in order to better improve yourself, better adapt to the needs of work, consider more comprehensively and carefully when dealing with problems in the future, and treat problems more rigorously.

Looking forward to 20xx, I am full of confidence, but I also feel a heavy responsibility. As the company continues to grow in size, the types of instruments have become increasingly diverse, which requires me to reposition myself and broadly Absorb all aspects of professional knowledge, and only by constantly enriching and enriching yourself can you do your job better in the new year, contribute your meager strength to the workshop and the company, and make your own efforts.