How long does it take for Liu Guo to regenerate in situ?

With the introduction of the National Six Standards, the national emission standards are becoming stricter and stricter. The vehicles of National Six also need to be regenerated regularly to solve the problem of exhaust pollution. So how often does Liu Guo regenerate?

Under normal circumstances, vehicles can be regenerated once every 2000km or more. The regeneration time usually takes 10 minutes, and the vehicle shall not be shut down within 10 minutes. After the regeneration is completed, the indicator light goes out and the owner can continue to use the vehicle.

The recovery function of freight cars according to the national six environmental protection standards is to collect harmful particles in exhaust gas through corresponding devices and filter and oxidize them. This process is called recovery function. The regeneration function of freight cars is generally equipped with three modes, namely, passive regeneration, active regeneration and in-situ regeneration.

Among them, passive regeneration occurs automatically when the driver drives the vehicle normally, without human intervention. The active regeneration of driving is also automatically completed through the working state of the engine, mainly when passive regeneration can not further maintain low-carbon deposition and reduce soot emissions, in this case, the active regeneration function will be triggered to work.

Finally, the in-situ regeneration mode is necessary when the vehicle is ignited but at rest. This requires the driver to activate this function by turning on the in-situ regeneration switch. Generally, when the carbon deposit reaches the specified limit, the corresponding indicator light will light up before entering the working state.