Self-inspection report on fire extinguisher safety hazards

#report# Introduction As society continues to progress, the number of occasions when people use self-examination reports continues to increase. Self-examination reports are a way to deal with situations. The following is a self-examination report on fire extinguisher safety hazards compiled by Kao.com. Welcome to read!

1. Self-inspection report on safety hazards of fire extinguishers

The building (place) management unit shall determine specialized personnel to conduct daily inspections of fire extinguishers, and conduct inspections according to the fire extinguisher instruction manual provided by the manufacturer. Employees are trained on the operation and use of fire extinguishers.

The daily inspection of building fire extinguishers is divided into two situations: inspection and inspection (test). Inspection is an inspection of the visual attributes of the fire extinguisher within a specified period. Inspection (test) is a comprehensive inspection of the configuration and appearance of the fire extinguisher in accordance with fire protection technical standards within a specified period.

(1) Inspection

1. Inspection content: including the status of fire extinguisher configuration points, the number of fire extinguishers, appearance, maintenance signs and fire extinguisher pressure indicators, etc.

2. Inspection cycle: Key units will be inspected at least once a day, and other units will be inspected at least once a week.

3. Inspection requirements:

①The fire extinguisher configuration point shall comply with the requirements of the installation configuration chart, and there shall be luminous indication marks on the configuration point and its fire extinguisher box that meet the specified requirements.

②The number of fire extinguishers meets the configuration and installation requirements, and the pressure indicator of the fire extinguisher points to the green zone.

③The appearance of the fire extinguisher has no obvious damage or defects, and the lead seal (plastic tape, wire seal) of the safety device is intact.

④For repaired fire extinguishers, the repair marks must comply with regulations.

(2) Inspection

Inspection (test) content

Comprehensively check the configuration and appearance of the fire extinguisher. For details of the inspection content, please refer to the building fire extinguisher inspection (test) content and Request form.

Inspection cycle

Comprehensive inspections of the configuration and appearance of fire extinguishers are conducted once a month, in public places with densely populated areas such as waiting rooms (aircraft and ship), singing and dancing entertainment screenings, etc. Fire extinguishers installed in places as well as storage yards, tank farms, petrochemical equipment areas, gas stations, boiler rooms, basements and other places should be inspected every half month.

Inspection requirements

The configuration and appearance of the fire extinguisher must be comprehensively inspected in accordance with the above building fire extinguisher inspection content and requirements table, and detailed records must be recorded during the inspection and archived.

Fire extinguishers that have been inspected or repaired should be placed according to the original configuration point location and configuration requirements.

If during inspections and inspections it is discovered that the fire extinguisher has been moved, is missing parts, has obvious defects or damage, or has a change in the nature of use of the place where the fire extinguisher is installed, it shall be dealt with in a timely manner in accordance with the procedures prescribed by the unit; it meets the maintenance conditions If it reaches the scrapping conditions and age, it should be scrapped in time and must not be used, and an equivalent fire extinguisher that meets the requirements should be replaced.

2. Self-inspection report on fire extinguisher safety hazards

1. Current rectification and implementation status of safety hazards discovered during the inspection:

1. Each office has been equipped with Good fire extinguisher and gas mask.

2. The obstacles in the fire escape have been cleared, and there are no obstacles within 1 meter around the fire hydrants, ensuring that fire equipment can be used normally without hindrance.

3. There is a "No Smoking" sign posted in the large conference room.

2. Rectification measures:

In order to ensure safety and eliminate fire hazards, the company has made the following rectifications on the main problems that existed during the inspection and self-inspection of the superior security department:

p>

1. Strengthen publicity and raise awareness.

2. The company educates and publicizes safety knowledge, laws and regulations to employees regarding fire protection, public security, and comprehensive safety management. Through these forms of publicity, employees are fully aware of the importance of creating a safe and civilized life. , raising the awareness of all employees that the responsibility of "prevention first, combining prevention and fire prevention" in safety work is more important than Mount Taishan.

3. The company attaches great importance to the development of employees' behavioral habits, so that the responsibilities of "three cleans and three checks" are specific to each person, so that the safety inspection management work is implemented by the person. By working together to ensure the safety of property and life, regular inspections and frequent inspections are carried out.

3. Fire extinguisher safety hazard self-inspection report

According to the requirements of safety work, we always attach great importance to safety work, and now we will make the following report on the inspection status in the first half of the year. This inspection involves seven items of information:

1. Fire protection publicity and training

Always put safety first at work and organize employees to conduct safety education; Warning slogans are hung in places where fire and electricity are used such as kitchens and kitchens to remind them of the importance of safety; for new temporary workers and employees, the use of fire extinguishers and fire alarm procedures are explained. The use of fire extinguishers was demonstrated.

2. Fire-fighting facilities and equipment

One fire extinguisher will be inspected this time, and other facilities will be managed by the property management.

3. Usage conditions of electrical appliances

This inspection conducted a more detailed inspection of the hygiene and operating conditions of the operation room. The hygiene condition is good, and common equipment such as rice cookers are in use. It is normal to ensure that there is no fire situation caused by operational errors.

IV. Power distribution, circuits and lines

Inspection data: the operating status of distribution boxes, operating rooms, warehouse facilities and equipment, etc. and simple lines. Through inspection, power distribution The cabinets and facilities and equipment are operating normally, and the problem of unselfish wiring is established, and relevant inspection systems are established to assign responsibilities and effectively eliminate safety hazards.

5. Fire exit

The fire exit in the canteen is smooth and free of debris; it is cleaned once a week and is in good sanitary condition; the lighting and passage markings are in good condition and meet safety requirements.

6. Inspection of the goods and electricity channels in the shopping mall found that there were not enough fire extinguishers and four more fire extinguishers were added.

Two emergency lights were added to stabilize the electricity supply in two places.

7. Existing fire hazards

1. There is a certain degree of damage to the electrical circuits in the canteen walls.

2. Some employees still have a fluke mentality and will further strengthen their education in the future.

3. Found a problem with electricity stability and made changes.

4. The mall found two stable problems and made changes.

Through this self-examination, we have eliminated some hidden dangers in fire safety in our department as much as possible, provided an educational lesson to employees ideologically and consciously, and improved employees' fire safety Knowledge and skills lay a solid foundation for the safety system of the staff canteen.

4. Fire extinguisher safety hazard self-inspection report

In order to ensure the fire and theft safety of our center’s office environment, from March 22 to 23, according to the arrangements and deployments of the center leaders, the center is responsible for He led the office and logistics personnel to form a safety inspection team, which conducted strict inspections on the fire safety and theft prevention work of the central office building and laboratory building. The inspection status is now reported as follows:

1. Overall safety inspection status

The inspection team first inspected the doors and windows on the third and fourth floors of the office building, computer rooms and office equipment, electrical circuits and switches, fire safety passages in the corridors, fire protection facilities, electricity and water use, environmental sanitation, etc. in the canteen on the first floor. The condition was checked. Then, the doors and windows, instruments and equipment, office equipment, electrical lines, corridor fire safety passages, fire protection facilities, etc. of the cold storage room on the first floor of the experimental building, offices and laboratories on the second to fourth floors were inspected. The inspection team conducted a comprehensive and thorough inspection without leaving any blind spots. The inspection results showed that the overall condition was very good and there were no major safety hazards.

II. Existing problems

1. Each floor is equipped with dry powder fire extinguishers of 8kg and 4kg sizes placed directly on the ground, which is not conducive to the storage and maintenance of fire-fighting equipment. .

2. The power sockets and plug boards in some offices and laboratories are damaged, posing safety risks.

3. There are debris piled up in the computer room, which are piled up in a messy manner, posing fire safety hazards.

4. There is no safety door in the test area of ??the laboratory building, and outsiders can enter and exit at will, which poses a potential security risk against theft.

3. Corrective measures and recommendations

1. Purchase special boxes for fire-fighting equipment to contain all fire extinguishers, effectively protect fire-fighting equipment, and stack them neatly.

2. Logistics is required to promptly replace defective power sockets, and office plug-in boards must be replaced by users themselves to ensure the safety of the electrical appliances (instruments) used.

3. It is strictly forbidden to pile up debris in the machine room. Clean it immediately to eliminate fire safety hazards and ensure the normal operation of the machine.

4. Install anti-theft safety doors at the entrance to the second floor of the laboratory building to ensure the property and fire safety of offices, instruments and equipment in the laboratory building.

5. Adhere to the normalization and long-term management of fire safety, recommend the establishment of a central fire safety work leading group, strengthen safety publicity and education, establish and improve safety management regulations, and insist on monthly supervision and inspection of fire safety work. Check for safety hazards.

In response to the fire safety hazards discovered during the inspection and the fire safety self-inspection work, the person in charge of the center pointed out that the fire safety hazards are related to the lives of all cadres and employees and the safety of national property. Everyone must fully realize the great responsibility of fire safety , there should be no slacking off or taking any chances, ensuring "no blind spots in fire safety", eliminating safety hazards, and jointly creating a stable and safe working and living environment.

5. Self-examination report on fire extinguisher safety hazards

“Safety and safety” is an important task that our club has long insisted on. In order to ensure the safety of all personnel in our club, We have firmly established the concept of safety first and responsibility overriding Mount Tai. Since its opening in September 20xx, the club has participated in many trainings from the national government and relevant departments, and has conscientiously implemented the policy of "unified leadership by the government, supervision by departments, and overall responsibility by units" to ensure that everyone is protected from fire and everyone is responsible. Everyone is responsible and responsible, improve the safety awareness of all employees, and prevent problems before they occur. According to the information on fire protection organization training, we returned to our club to conduct substantive "fire drills" and "fire safety knowledge" training on fire safety. This time, according to the document requirements and deployment, the association organized relevant personnel to conduct a careful self-examination of fire safety

The situation is now reported as follows:

1. Check whether the safety passage is clear. ：

The club currently has three safety exits. The corridors, two-way stairs and employee passage exits in the building are free of any debris to ensure smooth fire escapes; all passages and exits leading to the outside of the building are equipped with "safety "Exit signs" and "emergency lighting"

2. Check evacuation emergency facilities and fire-fighting equipment:

1. Install a total of 15 "emergency lighting" in the club building and 17 "safety exit signs", all of which can be used normally to ensure emergency lighting and indicate the exit direction in the event of a power outage.

2. There are 9 fire hydrants installed and all are in normal use. Our club has also organized personnel to conduct comprehensive knowledge, understanding and practical operation drills on fire hydrants.

3. Fire extinguishers. All the fire extinguishers used by this association are "dry powder" fire extinguishers, with a total of 30 fire extinguishers. During this self-inspection, the existing 30 fire extinguishers were all within the validity period.

4. There are two fire doors installed. When the fire brigade came to inspect in the early stage, they found that they were not closed in place. After subsequent rectifications, all fire doors have now been closed in place.

5. The sprinkler and smoke prevention and exhaust systems are working normally, and the fire alarm controller also displays "alarm system normal".

6. The fire pool, sprinkler pipes, fire hydrant pipes, switches and valves are all intact.

7. All circuit pipes are completed in the form of pipes.

3. Check fire-fighting knowledge:

On the basis of the original fire-fighting knowledge, spot checks on fire-fighting knowledge were conducted on employees, especially those in charge of warehouses and private rooms, and on all employees Random inspections were made on how to evacuate people and self-rescue during a fire.