Requirements for ground marking of fire exits in the community

In accordance with the relevant requirements for setting up fire truck passages, measure the width of fire truck passages on the spot against the standardized requirements, and take measures such as making no-parking banners, setting up warning signs, and marking lines on the ground to set up fire truck passages at the entrances and exits of residential areas. Set up eye-catching markings on the road surface and on both sides. Mark the fire exits in the community with a yellow no-parking line and the eight characters "Fire exits, no occupation", and put warning signs on them to remind citizens not to encroach on the fire exits.

It is required that the line in the passage must be a thick solid yellow line. Because the street is used more daily, as a fire escape, the center line must be made more obvious.

If the distance between channels in the community is greater than 1.6 meters, a dedicated fire lane must be set up and clearly marked to avoid being occupied.

1. Ground marking requirements for fire passages

1. The lines in the passages are required to be yellow, because the street road requires fire trucks, so its road center line The time needs to be made more obvious. For example, the space spacing in the community cannot be greater than 1.6 meters. If it is greater than this value, a dedicated fire lane must be set up.

2. Some streets have buildings with inner courtyards and patios, or there are buildings along the street. The alley on the residential floor is very small. At this time, we need to set up pedestrian passages connecting the street and the other side. Stairwell available as well. For other sidewalks, the spacing should not be greater than 80 cm. This ensures the normal passage of fire trucks.

3. No matter where the fire line of the fire escape is found, it should be a solid yellow line. There is no substitute for threads of other colors.

2. How to mark fire escapes

1. In fact, the marking of fire escapes is relatively simple. Generally, hot melt reflective lines are used for marking. This reflective line can be used on Reflection is done at night, and it is basically painted on the line, with words prohibiting occupation. This can tell everyone not to occupy the fire lane, and not to accumulate debris on the fire lane, otherwise it will affect the traffic, and you will be responsible for the consequences.

2. When drawing fire lines, be sure to put a different pattern on the paper and draw it on the ground according to the outline of the pattern. After that, the ground must be cleaned and the Heat the hot melt paint again, and then apply a layer of primer.

Legal Basis

Article 16 of the "Fire Protection Law of the People's Republic of China" Agencies, groups, enterprises, institutions and other units shall perform the following fire safety responsibilities:

(1) Implement the fire safety responsibility system, formulate the unit’s fire safety system, fire safety operating procedures, and formulate fire extinguishing and emergency evacuation plans;

(2) Configuration in accordance with national standards and industry standards Fire-fighting facilities and equipment should be equipped with fire safety signs, and regular inspections and maintenance should be organized to ensure that they are intact and effective;

(3) A comprehensive inspection of the building's fire-fighting facilities should be carried out at least once a year to ensure that they are intact and effective, and the inspection records should be complete Accurate and archived for future reference;

(4) Ensure that evacuation passages, safety exits, and fire truck passages are smooth, and ensure that fire and smoke prevention zones and fire prevention distances comply with fire protection technical standards;

(5) Organize fire prevention inspections and eliminate fire hazards in a timely manner;

(6) Organize targeted fire drills;

(7) Other fire safety responsibilities stipulated in laws and regulations.

The main person in charge of the unit is the person responsible for fire safety of the unit.