Correct Sticking Method of BMW 5 Series Tail Mark

Correct pasting method of BMW 5 Series Tail Mark: Determine the position to be pasted. In general, stick it slowly, scrape it flat with a tool and uncover the bottom. If the graphics are really not big, you can also tear off all the transparent transfer films and stickers before pasting them. But care must be taken not to cause accidental adhesion. After pasting, scrape and press it several times. Tear off the transparent transfer film. Cut a knife on the door and sewing with a utility knife and wrap it inside.

The following methods can be used to pick up the automobile tail label:

1, the easiest way is to pour it with hot water, pour it on the sign with hot water, and then take it off and wipe it clean.

2. Drop essential balm on the logo, put on gloves after 1 minute, and fasten the logo with fishing line. If you find that the required strength is small, you can easily buckle the logo.

3. Apply it with a hot towel, or blow it with a hair dryer, and then pull it back and forth into the seam of the logo with a thin steel wire.

4, go to the decoration shop or 4S shop, they will help you get it, as well as professional sol.