Do you know the steps and methods of scraping porcelain powder?

1. What are the steps and methods of scraping porcelain powder?

1. First, remove the original wall and clean it to make it smooth. Uneven positions are evenly filled with gypsum powder and 108 glue. 2. Then use Mo Dou UI ruler to make the angle of Yin and Yang, and finally touch up the paint. Untreated areas should be filled in. 3. Attention should be paid to the use of 107 rubber material that does not meet the national standards during construction. Choose 108 glue, which is an improved product of 107 glue. 4. Glue 107 is colorless or yellow viscous liquid, and glue 108 is translucent or transparent aqueous solution. When in use, there is no peculiar smell in eyes, nose and respiratory tract.

Second, what is scraping porcelain powder construction?

1 basic treatment

Remove the dust from the surface first. If there is oil on the surface, please clean it with detergent. After cleaning the surface, clean it with clear water. Be sure to wait for the putty to dry before shoveling. Smooth off the excess putty with a little rough sandpaper.

2, full blow be bored with child twice

When we use it for the first time, we should scrape off the rubber completely, the horizontal direction should be smooth and the line angle should be aligned with the edge. Scrape as thin as possible, don't miss scraping, be careful not to dirty the doors and windows, and deal with them immediately. After the first drying, smooth it with coarse sandpaper.

3, the underlying coating construction

It can only be carried out on a dry and firm surface, and then sprayed. At the same time, it should be evenly spread without leakage.

4, intermediate coating construction

If you find unevenness in the first painting, you should smooth it with putty. Stir well with a mixing gun before painting. If the consistency is relatively large, you can add a little water. The amount of water added each time must be the same and the consistency should be the same.