Does ceramic tile floor also need finished product protection? How to do it?

Tile floors must be protected as finished products because cement mortar is used when laying the tile floors. It takes a certain amount of time for the strength of the cement mortar to reach the design requirements. If there are people stepping on the ground or stacking heavy objects during this time, It will cause quality problems such as disturbance of the floor tile base, hollowing of the floor tiles, and cracking of the brick surface. Therefore, the newly installed floor tiles must be protected by finished products.

The protection measures for the finished product of this floor tile project are:

(1) Use reasonable flow processes to lay the mortar layer for the floor tiles without affecting the construction period and the construction of the next process. Allow maintenance time; write protective measures for finished products, and conduct technical briefings to the construction team;

(2) For rooms with newly tiled floors, set up protective railings at the door. The protective railings should be made of short steel pipe poles or wooden squares, horizontally Three rows, with a height of 1.5 meters, and vertical supports in the form of tripods on both sides. It is prohibited to walk or step on the ground for 3 days at room temperature;

(3) Before removing the protective railings, the tiles must be inspected Check the firmness of the ground. If the conditions for people are not met, the protection time will be extended. After the conditions for people are met, the next construction process can be carried out;

(4) Remove the protective railings and proceed on the floor tiles. During construction operations, it is prohibited to pile heavy objects, sand and other raw materials, heavy construction machinery and equipment on the ground, and it is strictly prohibited to use tools to hit the ground when performing other project construction operations on the ground to prevent falling objects from hitting the ground.