Self-examination report on hidden production safety hazards

Self-examination report on production safety hazards

In our ordinary daily life, we use reports more and more, and reports have the characteristics of descriptive language. Does procrastination and laziness come back as soon as you hear about writing a report? The following is a self-examination report on production safety hazards that I compiled for you. It is for reference only. Let’s take a look at it together.

Self-examination report on hidden dangers in production safety 1

In order to do a good job in hospital safety work, in accordance with the spiritual requirements of the municipal safety meeting, comprehensively implement the important spirit of safe production in the health system and ensure all aspects of safe production To implement the work tasks, the safety production leading group of our hospital carefully organized the study, carried out investigations strictly according to the requirements, and conscientiously solved the existing problems. The self-examination situation is now reported as follows:

1. August 29, 20xx Inspections were conducted on ① power supply line water room facilities, pressure vessels, pressure pipes and other facilities and equipment; ② radiology department facilities and equipment; ③ outpatient clinics, wards and other gathering places; ④ charging rooms; ⑤ pharmacies; ⑥ conference rooms and other key locations. In particular It is the maintenance of power supply system, water supply and other equipment and facilities to ensure normal operation.

2. The hospital safety leading group is well organized

A production safety organization has been established, equipped with safety officers, personnel and responsibilities are clearly defined, a production safety management system has been established, as well as production safety education, Training, inspection, evaluation, reward and punishment system, outpatient, emergency and other personnel gathering places are safe, fire-fighting equipment is in good condition, and evacuation channels are smooth; employees are convened to conduct special education on "fire protection knowledge" to improve employees' fire awareness; and relevant personnel are organized to investigate conflicts and disputes in the hospital work and actively resolve unstable factors. The hospital takes the self-examination of production safety as an opportunity to promptly discover safety hazards and effectively curb accidents.

3. Pay close attention to medical safety.

The leaders of the hospital promptly convened the heads of various business departments to conduct special discussions on special medical safety activities around the theme of "patient-centered", unify their thinking, raise awareness, organize and carry out medical quality education for all staff, and improve medical safety Awareness, the medical management organization conducts extensive inspections throughout the hospital, implements medical management systems and operating procedures, strictly inspects quality links, eliminates safety hazards, and provides a harmonious and safe medical environment for the people.

IV. Existing problems

1. Some switches and electrical appliances in some departments are damaged, posing hidden dangers.

2. Due to space restrictions, there are temporary rooms built in the hospital, and the medical environment is crowded.

V. Rectification measures

1. Actively repair and replace damaged electrical appliances to ensure safe use of electricity;

2. Guide patients to seek medical treatment and ensure good medical order.

Through self-examination, the awareness of safe production has been improved, responsibilities have been clarified, and the "four in place" (responsibility in place, measures in place, first aid drugs in place, and emergency supplies in place) have been ensured. The ward's duty force strictly implements the production safety duty and leadership cadre duty systems during holidays. Self-examination report on production safety hazards 2

District Safety Committee:

This week, our bureau will continue to increase the investigation of safety hazards, organize personnel to conduct comprehensive inspections of production safety in various departments, and eliminate In view of the occurrence of various safety accidents, the bureau’s safety production inspection this week is now reported as follows:

1. The urban management law enforcement brigade is responsible for random parking, road occupation, and road occupation that affect the safety of pedestrians. Construction and other illegal activities were resolutely corrected, and no safety hazards were found through investigation.

2. The Municipal Administration focuses on ensuring the safety of municipal public facilities and continuously conducts careful and detailed inspections of municipal public facilities such as main roads, sidewalks, overpasses, urban lighting, urban flood control, and commercial street greenhouses within its jurisdiction. No safety hazards were found.

3. The Environmental Sanitation Department focuses on ensuring the safety of public sanitation facilities, strengthens the driving safety management of sanitation fleets, and improves drivers’ sense of responsibility.

The maintenance of transfer stations, garbage bins, peel bins and other facilities within the jurisdiction is continuously and carefully investigated, and rectifications are quickly implemented where safety hazards are found in the management of transfer station facilities and the safe driving of fleet drivers' vehicles. Safety 4. The River Management Office focuses on ensuring the safety of river public facilities and flood season safety, actively cooperates with municipal and district water conservancy and other relevant departments to make emergency preparations for flood prevention and relief, and continuously conducts careful inspections of guardrails, iron chains, and sewage manhole covers of river public facilities within its jurisdiction. After careful investigation, no safety hazards were found. Management 5. In order to ensure the safe and normal entry of daily garbage into the landfill area, the landfill company strengthens the landfill management of garbage entering the reservoir area and strengthens the command of entering vehicles to ensure the safety of all vehicles entering the reservoir area. Medical waste disposal personnel are equipped with corresponding protective equipment, and no safety hazards were found through inspections.

6. During the demolition of illegal buildings, the planning law enforcement team will formulate a thorough demolition plan to ensure the safety of the illegal demolition site, passing vehicles and pedestrians; strengthen inspections of municipal public facilities and business premises, and discover violations and handle safety hazards in a timely manner.

7. Landscaping and Greening The Park Management Office strengthens safety knowledge training for staff during the greening work, and adopts a series of safety work guarantees to effectively prevent the occurrence of major safety accidents. Self-examination report on production safety hazards 3

In accordance with the work requirements of the production safety video and telephone conference on January 9, 20xx, our bureau carried out a self-examination of production safety hazards based on the actual work. The relevant situation is now reported as follows ：

1. Convene a self-inspection work on production safety hazards

Mobilization meeting On January 10, our bureau organized all employees to hold a mobilization meeting on self-inspection work on production safety hazards. Comrade Tang Yongqiang conveyed The spirit of the province's production safety video and telephone conference was emphasized, the importance and necessity of production safety and stability maintenance work were emphasized, and a detailed arrangement was made for the next step of work.

2. The leadership attaches great importance and the organizational structure is established and improved

In order to effectively carry out the safety production work in 20xx, our bureau established a team with the director as the team leader and the deputy director and chief engineer as the deputy team The self-examination leading group for production safety hazards is composed of the director and the heads of each department and unit. The leading group has an office under which Comrade Su Yurui is responsible for the investigation of hidden production safety hazards within the bureau.

3. Take active actions and carry out the work smoothly

From January 11 to January 14, 20xx, our bureau carried out the investigation of potential safety hazards in the bureau. The specific situation is as follows: ( 1) The cadres of this bureau have effectively strengthened their awareness of production safety, and conduct inspections of their respective departments (units) before going to work and before leaving get off work every day, eliminating the possibility of inadvertent safety accidents; (2) Each department (unit) has conducted inspections on its own Hazardous chemicals involved in the area and a hazardous chemicals ledger has been established. After investigation, the hazardous chemicals involved in our bureau only involve gasoline; (3) The bureau conducted an inventory of expired fire extinguishers. Our bureau only has 4 fire extinguishers, all of which are There was a unified procurement in 20xx, and there were no expired fire extinguishers. At present, our bureau has not identified any hidden production safety hazards; (4) The chief engineer of our bureau went to Egu Township to station in the township, and conducted inspections for safety production hazards during his stay in the township. No safety production hazards have been identified so far. . Self-inspection report on hidden production safety hazards 4

In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the majority of employees, and ensure the normal construction order of the project, combined with the actual situation of the project department , our department has carefully and meticulously inspected the safety work at the construction site, and carried out hidden danger inspection and management activities at the construction site. The self-inspection and rectification situation is summarized as follows:

1. Safety management

1. Establishment and improvement of safety organization structure

The project department has established a safety management network, safety production responsibility system, and safety management system with the project manager as the first responsible person. A full-time safety officer is assigned to be responsible for on-site safety inspections and safety inspections at the construction site, forming a top-down safety assurance system.

2. Implementation of the safety management system and responsibility system

(1) At present, the project department’s safety regulations are complete and highly operable. Continuously improve the execution of safe and civilized construction systems to strengthen safe and civilized construction management and prevent accidents.

(2) In order to ensure safe production, the project department formulated safety target indicators and decomposed them layer by layer according to the relevant requirements of the company, clarified the safety responsibilities of personnel and departments at all levels, and during the construction process Supervision is implemented in place.

The project department signed a "Safety Responsibility Letter" with the heads of each construction team, and strictly implemented the safety production responsibility system at all levels and the safety accident liability investigation regulations. Supervise, inspect and assess the implementation of the system, promptly remind and educate those who violate the responsibility system, and provide rewards and punishments based on assessment results.

3. Safety inspection and hidden danger investigation

In addition to daily safety inspections, the project department also purchases various safety warning signs and construction signs according to the site conditions. During construction, Corresponding warning placards should be placed at site entrances, passageways, near electrical equipment and other places to remind staff to pay attention to protect themselves and others and eliminate potential safety hazards.

4. Safety education and training

(1) The project department conducts timely safety education and training for new site managers and workers from time to time. The main contents of the training include: corporate rules and regulations, basic safety knowledge, construction safety precautions, various relevant safety technical measures and operating procedures, emergency rescue plan learning, etc.

(2) Participate in safety technical training and certification for electricians, welders, loader drivers and other special operations personnel as required.

(3) Each construction team conducts its own team safety education activities.

2. On-site construction safety conditions

1. Temporary facilities

(1) The temporary facilities have been planned strictly in accordance with the requirements and the layout is relatively reasonable.

(2) Temporary facilities must meet technical requirements such as fire protection, rainproofing, and heat preservation. Personnel are arranged to patrol the living and office areas, construction areas, warehouses, and mechanical equipment parking areas 24 hours a day to ensure the safety of on-site supplies and materials.

2. Safe use of electricity

At the construction site, "one machine, one gate, and one leak" for electrical equipment ensures the safety of electricity; warning signs are placed on power supply equipment. . Lighting fixtures and power supply lines shall be installed as required. Electricians on duty will conduct regular inspections and deal with hidden dangers in a timely manner to prevent accidents.

3. Special equipment

The daily operation, maintenance, delivery records, etc. of the main mechanical equipment are handled by dedicated personnel. During the use of equipment and transportation vehicles, regular inspections, repairs and maintenance should be carried out, and equipment operation, repair and maintenance records should be filled in. Immediately stop work, rectify or remove equipment with potential safety hazards. Scaffolding construction

4. Fire management

The project department has formulated a fire management responsibility system and implemented it in place. Developed and improved fire emergency plans.

The project department has stepped up inspection and monitoring of fire-prone areas.

(2) There are no violations in work areas or parts where fireworks or smoking are prohibited.

5. Safety protection facilities

During construction, safety management personnel can formally wear and use protective equipment such as safety helmets and safety belts; protective facilities and safety equipment are set up at cave entrances and dangerous locations. Obvious warning signs; fire-fighting facilities are installed near electrical parts and flammable materials.

3. Problems in safety management

1. Individual personnel have weak safety awareness, and habitual violations still occur at the construction site.

2. The layout of construction power lines is chaotic and needs further standardization.

3. Equipment is regularly inspected and various systems are improved; however, the inspection data and records of the equipment themselves are incomplete; further improvements.

4. Some safety protection facilities have not kept up with the progress of project construction, causing safety protection to lag behind during construction.

IV. Rectification measures taken:

In order to ensure the safety of project construction and eliminate various safety hazards, the project department proposed the following rectification measures for the main problems existing during the self-inspection process:

1. The project department will strengthen supervision and carry out safety education in batches, using daily inspections, inspections, meetings, safety education and training, bulletin boards, newspapers, documents and other methods to educate employee cadres on safety knowledge, Education and publicity on laws and regulations, etc., to improve employees’ safety awareness and sense of responsibility, and to prevent the occurrence of safety accidents.

2. We will continue to pay attention to the issue of electricity consumption in construction, strictly investigate the illegal use of electricity in workers’ dormitories, and conduct unified and standardized layout of on-site wiring.

3. Strengthen the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must ideologically improve the safety awareness of employees.

4. Sound and perfect the system to ensure that comprehensive safety management work has rules to follow and is implemented in place. Strictly implement the responsibilities of all levels and departments in accordance with the safety responsibility system.

5. Carry out safety inspections and hidden danger inspections and management on a regular basis in a timely manner and in accordance with the regulations of the project department, and do a good job in finding and rectifying safety hazards at the construction site.

In short, through this major inspection, some shortcomings and omissions in the safety work of the project department were discovered. The project department made timely rectifications and brought them under effective control, but safety work is a long-term task. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of the majority of employees, enable various tasks and requirements of safety management to be better implemented, further enhance their awareness of safety responsibilities, and clarify their respective responsibilities. Responsibilities to provide safety guarantee for the smooth progress of project construction. Self-examination Report on Hidden Safety Hazards in Production 5

In accordance with the requirements of the "Notice on Concentrating Special Actions on Safety Inspection and Rectification", we carry out self-examination and self-correction activities on enterprise safety production. The leaders of our company attach great importance to it, actively organize relevant personnel to organize and mobilize, and seriously carry out self-examination and self-correction, leaving no dead ends. In response to existing problems and weak links, we will formulate a rectification plan in accordance with the principles of determining personnel, time, measures, and funds, and implement rectification measures to prevent accidents. The self-examination situation is summarized as follows:

1. Strengthen management and clarify responsibilities

In order to effectively strengthen the leadership of our company’s safety production work, the company has adjusted and enriched the company’s safety production leadership Team, strive to achieve clear goals, implement responsibilities, work in place, and nip problems in the bud.

2. Refine measures and implement them in place

Comprehensively implement the policy of “safety first, prevention first” and the spirit of relevant documents on production safety of divisions and regiments, and insist on achieving Manage according to law, strengthen supervision, strictly inspect, and urge rectification so that hidden dangers can be eliminated and accidents can be controlled. Focus on supervision work, strictly prevent general safety accidents, eliminate serious and major safety accidents, and ensure the safety of employees' lives and property

3. Appropriate work content and measures

1. Strengthen safety knowledge We conduct publicity and education and strive to improve the safety awareness of employees throughout the company. We should conscientiously carry out publicity and education on production safety laws, regulations and policies, advocate and implement the construction of safety culture, and enhance the company's employees' awareness of production safety. In accordance with relevant requirements, our company proactively selects personnel to participate in safety training and refresher training organized by superior authorities, and effectively trains company employees on safety production knowledge and production skills, and strives to ensure that the employment rate of special operations personnel and practitioners with certificates reaches the highest level. 100.

2. Strengthen safety responsibility management and establish and improve various rules and regulations.

The first person responsible for the safety work of the unit is directly responsible for the unit's safety production work. He must effectively perform his duties, strengthen supervision and inspection, eliminate various safety hazards in a timely manner, and strictly prevent the occurrence of various safety accidents.

First, we must conscientiously implement the safety production target management responsibility letter signed with the company, so that we have positions, positions, and responsibilities.

Second, the company’s production safety leadership group regularly organizes personnel to inspect and supervise the implementation of various departments, and registers the situation as a basis for scoring in the year-end comprehensive assessment.

Third, each unit must formulate and improve various safety production rules and regulations and safety production procedures based on its own actual conditions, and strictly implement them to eliminate the "three violations" phenomenon and ensure that safety production has rules and regulations to follow. .

3 Carry out a comprehensive safety production inspection. The company's production safety leadership group organizes a comprehensive safety production inspection every quarter. For major hidden dangers in the workshop, it urges them to formulate rectification measures, implement funds, arrange special personnel to supervise rectification, and file the hidden danger inspection and rectification status for archiving; Workshops and safety responsible units organize a safety inspection every month to discover hidden dangers, formulate measures, assign dedicated personnel, make rectifications within a time limit, and report the situation to the enterprise's production safety leadership team in a timely manner.

IV. Existing problems and deficiencies and rectifications

1. Self-made hooks are not allowed.

2. Do not connect or weld hooks indiscriminately (mainly on the gates and pillars on the first floor).

3. The escalator on the second floor of the workshop is partially deformed.

4. The nylon rod of the motor for beating wood chips should be replaced.

5. The finishing area is messy, and the silicon bags should be placed in the machine repair workshop and collected and used in daily quantities.

6. Debris is piled on the distribution box.

7. The person coming out of the oven is not wearing goggles, work clothes, or a mask.

5. In response to the problems identified above, in the next step of work, we must strengthen measures, urge the workshop to rectify on time, review on schedule, track rectification, ensure that rectification is in place, and make the following points:

1. Put the silicone bag into the machine repair workshop and collect it for use every day. Make sure the finishing area is clear of clutter.

2. The nylon rods of wood-cutting motors and workshop escalators should be inspected, repaired and replaced regularly by mechanics.

3. The installation and maintenance of electrical equipment are operated by electricians, and the circuits and all electrical equipment are regularly inspected.

4. The circuits in the workshop power distribution room need to be inspected regularly by electricians to ensure The neatness of the circuit.

5. The power distribution cabinet on the second floor of the workshop needs to be replaced and locked.

6. Strengthen the awareness of the importance of wearing goggles, work clothes, and masks for workers who are out of the furnace, and establish awareness of safe production. Earnestly implement the safety production responsibility system.

7. It is strictly forbidden to weld and hang indiscriminately in the workshop to ensure the standards of the workshop.

Under this self-inspection and self-correction of "cracking down on illegal activities" and "hidden hazard investigation", our company attaches great importance to further enhancing the safety hazards of the enterprise and employees and effectively eliminating them. The rectification opinions were quickly implemented, and the entire self-examination and self-correction work achieved good results. Self-examination report on hidden dangers in production safety 6

In order to effectively carry out the company's safety production work in the second quarter and ensure safe and stable production operations, according to the spirit of the relevant notices of the Junxian Safety Conference and the company's 20xx safety production work arrangements, the company The leaders attached great importance to the notice and quickly conveyed the spirit of the notice to all departments and teams. At the same time, they held a safety meeting of the company's leadership team to arrange and deploy the company's safety production work in the second quarter, implement various safety measures, and conduct a major safety production inspection of the company. Now the company will The self-examination status report is as follows:

1. Implementation status of the safety production responsibility system

In order to clarify responsibilities, a system was established with the general manager of the company as the first responsible person and the main person in charge of each department as the Member of the production safety leadership group. In the work, we establish the concept of people-oriented and safety first, and put forward high-level requirements for the heads of each department to manage production and understand production.

The company is equipped with full-time safety officers, and has formulated a safety production job responsibility system that suits the company's characteristics. It has decomposed the safety production responsibility system layer by layer, strictly implemented the responsibility subjects, and truly achieved clear responsibilities, assigned responsibilities to each person, and everyone's duties. duties to ensure the smooth development of safety production work.

2. Self-examination status

(1) Fire-fighting facilities: The raw material yard of the company’s Marketing Department and each team are fully equipped with fire-fighting equipment, including fire boxes and fire-fighting equipment. Dry powder fire extinguishers are all in Within the validity period. Implement the fire safety responsibility system step by step, improve emergency rescue plans, and strengthen emergency drills. Conduct special inspections and rectifications on fire protection facilities such as offices and production teams. Focus on careful inspection of fire-fighting facilities and fire-fighting equipment to ensure nothing goes wrong. Smoking is strictly prohibited where there are oxygen bottles and acetylene bottles.

(2) Equipment safety: The company organizes personnel to focus on checking whether pressure vessels and pipe network pipes have usage licenses and whether they have undergone regular inspections. The leakage of some power lines in the production workshop discovered during the early inspection without any protection has been improved. The cables in the raw material storage area were crushed or cut by passing vehicles. All of them have been replaced and reinforced. It is necessary to strictly prevent the operation of various facilities with diseases and ensure that special operators have certificates to work and whether the equipment is in good operating condition.

(3) The company office strengthens vehicle management; requires drivers to strictly abide by relevant laws and regulations on urban and highway traffic management, strengthen professional ethics, and ensure driving safety. Timely correct and severely crack down on fatigue driving, speeding and overloading and other illegal behaviors, conduct frequent comprehensive inspections of vehicle safety performance, prevent hospital vehicles from taking the road, equip fire-fighting equipment to prevent spontaneous combustion and fire accidents, and ensure vehicle driving safety.

3. Determination of major hazard sources and emergency situations

Based on the company’s own conditions, through unsafe behaviors at work, unsafe conditions of items, and unsafe factors in the working environment Conduct risk assessments, identify major hazard sources, and formulate corresponding emergency plans or management plans to prevent accidents. The major hazard sources identified by the company are:

① Working at height;

② Pipe network burst;

③ Mechanical injury;

p>

　④. Fire;

　⑤. Flood;

　⑥. Construction electricity. The company's full-time safety officers regularly inspect key locations such as the hydrolysis workshop, raw material storage yard, power distribution room, tank area and boiler section, and strictly abide by the safety production inspection system, conducting major inspections at least once a month. During the inspection or inspection process We will formulate rectification measures for potential safety hazards discovered during the operation, specify the rectification deadline, and strengthen supervision and inspection to ensure that the rectification of hidden dangers is effective.

The company has formulated special emergency plans for major hazards such as fire, flood control, and pipe network bursts. The rescue procedures and rescue measures in the plans are complete, and the plans are coordinated and closely connected. The company has conducted training and drills on various plans, and ensured that relevant personnel should be aware of and master them proficiently.

IV. Existing deficiencies

(1) (Self-examination report on school teachers’ ethics and conduct in 20xx), some of the company’s power supply lines are aging and need to be replaced urgently to avoid electricity load during summer operation Fire hazard occurs when aggravated.

(2) The company's automatic boiler has been renovated, the operating skills of employees have been further improved, and automatic boiler safety operation knowledge training has been strengthened to ensure the normal operation of the boiler.

(3) The safety awareness and safety quality of some employees need to be further improved. They must continue to adopt various forms to do a good job in safety production publicity, especially to strengthen production safety and fire safety publicity, and further improve the company's safety awareness and safety quality. Employees’ awareness of production safety.