How to use lights in crosswalk at night in subject three

The far and near light flashes alternately for not less than 2 times.

The night driving light test will randomly select three items from the following items for testing. Mainly includes:

1, you will turn at the intersection, please use the correct light (use the low beam light);

2. When driving on the road with low visibility, please use the correct lighting (turn on the high beam);

3. If you want to pass a sharp bend, please use the correct lights (alternately use the far and near lights for at least 2 times);

4. If you want to cross the slope, please use the correct lights (alternately use the far and near lights at least twice);

5. If you want to cross the arch bridge, please use the correct lights (alternately use the far and near lights for at least 2 times);

6. If you want to cross the crosswalk, please use the correct lights (alternately use the far and near lights at least twice);

7. If you want to cross an intersection without traffic lights, please use the correct traffic lights (alternately use the low and near lights for at least 2 times);

8. Please use the correct lights when overtaking (first turn on the left turn signal, then alternately use the far and near lights for at least 2 times, and then turn on the right turn signal);

9. If you want to meet other vehicles, please use the correct lighting (turn on the low beam).

Extended data:

Article 59 of the Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China:

1. When a motor vehicle passes through a sharp bend, a ramp, an arch bridge, a crosswalk or an intersection that is not controlled by traffic lights at night, it should alternately use far and near lights to signal.

2. When a motor vehicle passes through a sharp bend, the top of a ramp and other sections that affect the safe sight distance, overtaking or in case of emergency, it shall slow down and honk its horn.

Second, the lighting test instructions:

1, instruction 1: There are no street lights and poor lighting when driving at night.

Headlights, position lights and rear position lights are not turned on, which is unqualified.

2. Note 2: Please change the headlamp to high beam.

No conversion or conversion error, and the headlights are unqualified in the high beam state.

3. Instruction 3: Under the same conditions just now, please follow the car in front and don't change the high beam to the low beam. Unqualified.

4. Instruction 4: If you pass a sharp bend, a slope, an arch bridge, a crosswalk or an intersection without traffic lights at night, you will fail (you need to use the far and near lights alternately twice).

5. Note 5: The passing car with the other side is close to the incoming car of the other side150m, and the high beam is not replaced with the low beam, which is unqualified.

References:

Baidu encyclopedia-subject 3

References:

Baidu Encyclopedia-Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China