Sample enterprise safety production self-inspection report (three articles)

Enterprise safety production self-inspection report 1

In order to ensure the fire prevention and anti-theft safety of our company's office environment, according to the arrangements of the company leaders, the person in charge of the comprehensive office led the relevant office personnel to form a safety team The inspection team conducted a strict inspection on the fire safety and anti-theft work of the company's office building and the open-air parking lot downstairs on the afternoon of December 12. The inspection report is now reported as follows:

1. Overall safety inspection Situation

The inspection team first inspected the doors and windows, electrical circuits and switches, corridor fire safety passages, fire protection facilities, and environmental sanitation on each floor of the office building. Then the open-air parking lot, green belt and lighting facilities outside the building were inspected. The inspection team conducted a comprehensive inspection and found that the overall situation was good and there were no major safety hazards.

2. Existing problems

1. The doors leading to the terrace on both sides of the fifth floor roof are not locked, and the door of the fourth floor conference room and the conference room are not locked. The lock of an aluminum window cannot be locked, and the lock on the right side of the sliding door of the reading room is damaged. Outsiders can enter and exit at will, posing safety risks.

2. There are piles of debris in the reading room, which are piled up in a messy manner, posing fire safety hazards.

3. The entire building is equipped with only 2 dry powder fire extinguishers, and the shelf life of the dry powder in the fire extinguishers is unknown; the fire hydrants on each floor are locked, but the keys are missing, and it is not possible to check whether the fire hydrants can be used. Normal use. There are fire safety hazards.

4. Some offices on the second floor do not lock their doors after get off work, posing potential security risks against theft.

3. Corrective measures and suggestions

1. Ask a professional locksmith to install new locks for the doors leading to the terrace on both sides of the roof on the fifth floor, and for the doors and windows of the conference room and reading room on the fourth floor. The doors and fire hydrants on each floor will be replaced with new locks.

2. Classify and organize the reading rooms in accordance with the "6S" management standards to eliminate fire safety hazards.

3. Replace and purchase dry powder fire extinguishers as needed, and review the safety status of fire hydrants on each floor after replacing them with new locks.

4. Once again emphasize the requirement that the doors and windows of offices on each floor must be locked after get off work. In response to the safety hazards discovered during the inspection, the inspection team will contact relevant personnel to make timely rectifications to ensure that there are no blind spots in fire safety and no loopholes in anti-theft security, so as to create a stable and safe working and living environment for the company's employees.

Enterprise safety production self-inspection report 2

Regarding the requirements of the 20xx safety inspection notice of the Construction Office, our company’s self-inspection and self-inspection of safety officers, quality officers and construction team leaders meet the requirements , welcome leaders at all levels to visit the construction site to guide the work. In view of the quality and safety issues in construction projects, quality and safety involve a wide range of areas, are highly practical, have many influencing factors, and have high technical requirements. Project quality and safety are the core of project construction and the key to determining the success or failure of project construction. By grasping these two aspects of quality and safety, project construction can proceed smoothly and achieve good social, economic and environmental benefits.

In order to ensure the quality and safety of construction projects, our company adheres to the principles of "quality first" and "safety first" and adopts the "prevention first" approach to conduct dynamic management and emphasize quality and safety control. With "people at the core", we ensure project quality and construction safety, adhere to quality standards, operating specifications, and strictly inspect and accept, so that the final product reaches the best of society. Our company enters the construction stage and adopts the following methods to ensure quality and safety control measures:

1. Quality control measures

1. Quality policy: Adhere to the policy of "a century-old plan, quality first" and establish A sound and complete leadership team.

2. Quality management: all management functions of formulating and implementing quality policies. In order to achieve the specified quality objectives, organize teams and employees to participate in relevant learning activities and assume corresponding responsibilities.

3. Quality system: implements the organizational structure, responsibilities, procedures, processes and resources of quality management, and strictly controls the on-site acceptance of raw materials and semi-finished products.

4. Quality control: Adopt operational techniques and activities, cooperate with the construction unit, supervision engineers, and quality supervision departments to eliminate the causes of problems at each stage of the quality process, and strictly control "process quality control."

5. Quality assurance: Products or services must meet specified quality requirements to achieve current quality assurance. Verify and audit production, installation, and inspection work. In order to gain the trust of the construction unit, provide necessary information and evidence to relevant departments.

6. Quality objectives: On the premise of ensuring the realization of enterprise quality objectives, the quality system enables the enterprise's operating mechanism to be in the best combination of quality and cost. Only by effectively following the principle of adapting to the environment and achieving the enterprise's objectives , the principle of adapting to the characteristics of construction projects, establish and improve the company's quality system, adapt it to various environments, adapt to various project types and construction characteristics, obtain the best cost, fully achieve corporate goals, and make the company neutral in market competition Stay in an invincible position and gain maximum corporate and social benefits.

2. Safety management technical measures

Safety management at the construction site focuses on the control of unsafe behaviors of people and unsafe conditions of objects. The management purpose is to eliminate all accidents, avoid accident injuries and reduce accident losses.

1. Implement the safety responsibility system and implement responsibility management

(1) Establish and improve the safety production leadership organization headed by the project manager, and carry out safety management activities with organization and leadership.

(2) Establish a safety production responsibility system for personnel at all levels and clarify the safety responsibilities of personnel at all levels. Pay attention to the implementation of the system, pay attention to the implementation of responsibilities, and regularly inspect the implementation of safety responsibilities.

(3) Establish a safety production responsibility system for all employees to assume responsibility for safety production. Do it vertically to the end, without missing a link.

(4) All management and operating personnel shall sign a safety agreement with the construction project department and make a safety guarantee contract to the project department.

2. Safety education and training

The project department conducts safety education and training regularly and at designated locations to improve safety production knowledge and effectively prevent people from unsafe behaviors.

(1) For all management, operators must have basic conditions and high quality, and hold certificates to work.

(2) All construction and operating personnel must have legal labor procedures. Temporary personnel must sign a labor contract and receive entry education before they can enter the construction site and work positions.

(3) New workers must complete three-level safety education before entering the company, focusing on general safety knowledge, production organization principles, production environment, and production discipline. Emphasize the non-independence of operations. Mainly based on production organization principles, environment, discipline and operating standards.

(4) Mobilize all employees to carry out self-inspection, and combine self-inspection with system inspection to form a situation of self-inspection and self-correction, and inspection and correction at the same time. All employees can be improved in discovering risk factors, educated in eliminating factors, and trained in safety inspections.

3. Civilized Construction

(1) The significance of civilized construction: Civilized construction is an important symbol of modern construction, a basic management work for construction enterprises, and an important part of enterprises. window. Adhering to civilized construction is of great significance.

(2) Measures for civilized construction: The construction site is established with the project manager as the team leader, a sound management individual position responsibility system is established, and the responsibility is divided into pieces according to profession, position, area, and building number, and self-inspection, Mutual inspection and handover inspection system. Achieve self-produced and self-cleaned, daily clean-up every day, clean-up after completion of work, and standard management.

(3) Environmental protection measures: Strengthen the monitoring of dust and noise at the construction site, eliminate dust and sewage pollution, strengthen contact with local environmental protection departments, and contribute to the good environmental benefits of the enterprise.

Enterprise safety production self-inspection report 3

In order to further strengthen and improve the safety work of the project department, respond to the call of the institute, effectively protect the life safety and property safety of the majority of employees, and ensure the normal operation of the project. In terms of construction order, based on the actual situation of the project department, our department has carefully and carefully inspected the safety work at the construction site, and carried out hidden danger inspection and management activities at the construction site. The self-inspection and rectification situation is summarized as follows:

1. Safety management

1. Establishment and improvement of safety organization structure

The project department has established a safety management network and safety production responsibility system with the project manager as the first responsible person. management system. A full-time safety officer is assigned to be responsible for on-site safety inspections and safety inspections at the construction site, forming a top-down safety assurance system.

2. Implementation of safety management system and responsibility system

(1) At present, the project department’s safety regulations are complete and highly operable. Continuously improve the execution of safe and civilized construction systems to strengthen safe and civilized construction management and prevent accidents.

(2) In order to ensure safe production, the project department formulated safety target indicators according to the company’s relevant requirements and decomposed them layer by layer, clarified the safety responsibilities of personnel and departments at all levels, and carried out safety inspections during the construction process. Supervision is implemented in place.

The project department signed a "Safety Responsibility Letter" with the heads of each construction team, and strictly implemented the safety production responsibility system at all levels and the safety accident liability investigation regulations. The quality and safety department of the project department Supervise, inspect and assess the implementation of the system, promptly remind and educate those who violate the responsibility system, and provide rewards and punishments based on assessment results.

3. Safety inspection and hidden danger investigation

In addition to daily safety inspections, the project department also purchases various safety warning signs and construction signs according to the on-site conditions. During construction Corresponding warning placards should be placed at the entrance to the site, passageways, and near electrical equipment to remind staff to pay attention to protect themselves and others and eliminate potential safety hazards.

4. Safety education and training

(1) The project department conducts timely safety education and training for new site managers and workers from time to time. The main contents of the training include: corporate rules and regulations, basic safety knowledge, construction safety precautions, various relevant safety technical measures and operating procedures, emergency rescue plan learning, etc.

(2) Participate in safety technical training and certification for electricians, welders, loader drivers and other special operations personnel as required.

(3) Each construction team conducts its own team safety education activities.

2. On-site construction safety conditions

1. Temporary facilities

(1) Temporary facilities are planned in strict accordance with the requirements and the layout is relatively reasonable.

(2) Temporary facilities meet technical requirements such as fire protection, rainproofing, and heat preservation. Personnel are arranged to patrol the living and office areas, construction areas, warehouses, and mechanical equipment parking areas 24 hours a day to ensure the safety of on-site supplies and materials.

2. Safe use of electricity

The construction site ensures "one machine, one gate and one leak" for electrical equipment, ensuring the safety of electricity; warning signs are placed on power supply equipment . Lighting fixtures and power supply lines shall be installed as required. Electricians on duty will conduct regular inspections and deal with hidden dangers in a timely manner to prevent accidents.

3. Special equipment

A dedicated person is responsible for the daily operation, maintenance, shift handover records, etc. of major mechanical equipment. During the use of equipment and transportation vehicles, regular inspections, repairs and maintenance should be carried out, and equipment operation, repair and maintenance records should be filled in. Immediately stop work, rectify or remove equipment with potential safety hazards. Scaffolding construction

4. Fire management

The project department has formulated a fire management responsibility system and implemented it in place. Developed and improved fire emergency plans.

The project department has stepped up inspection and monitoring of fire-prone areas. < /p>

(2) There are no violations in work areas or parts where fireworks or smoking are prohibited.

5. Safety protection facilities

During construction, safety management personnel can formally wear and use protective equipment such as safety helmets and safety belts; protective facilities and safety equipment are set up at cave entrances and dangerous locations. Obvious warning signs; fire-fighting facilities are installed near electrical parts and flammable materials.

3. Problems in safety management

1. Individual personnel have weak safety awareness, and habitual violations still occur at the construction site.

2. The layout of construction power lines is chaotic and needs further regulation.

3. Equipment is regularly inspected and various systems are improved; however, the inspection data and records of the equipment themselves are incomplete; further improvements.

4. Some safety protection facilities have not kept up with the progress of project construction, causing safety protection to lag behind during construction.

4. Rectification measures taken:

In order to ensure the safety of project construction and eliminate various safety hazards, the project department proposed the following rectification measures for the main problems existing during the self-inspection process:

1. The project department will strengthen supervision and carry out safety education in batches, using daily inspections, inspections, meetings, safety education and training, bulletin boards, newspapers, documents and other methods to educate employee cadres on safety knowledge, Education and publicity on laws and regulations, etc., to improve employees’ safety awareness and sense of responsibility, and to prevent the occurrence of safety accidents.

2. We will continue to pay attention to the issue of electricity consumption in construction, strictly investigate the illegal use of electricity in workers’ dormitories, and conduct unified and standardized layout of on-site wiring.

3. Strengthen the supervision of habitual violations. To strengthen safety education, management supervision and punishment, we must ideologically improve the safety awareness of employees.

4. Improve and perfect the system to ensure that comprehensive safety management work is well-organized and implemented. Strictly implement the responsibilities of all levels and departments in accordance with the safety responsibility system.

5. Carry out safety inspections and hidden danger inspections and management on a regular basis in accordance with the regulations of the project department in a timely manner, and do a good job in finding and rectifying safety hazards at the construction site.

In short, through this major inspection, some shortcomings and omissions in the safety work of the project department were discovered. The project department made timely rectifications and brought them under effective control, but safety work is a long-term task. The project department will continue to pay close attention to safety, consolidate the basic work of safety management, improve the safety awareness of the majority of employees, enable various tasks and requirements of safety management to be better implemented, further enhance their awareness of safety responsibilities, and clarify their respective responsibilities. Responsibilities to provide safety guarantee for the smooth progress of project construction.