How to keep the electric car roof from getting wet?

1, sunshade, more often need to bear the responsibility of shading and rain, so we need to pay attention to keep the tarpaulin dry when using sunshade for cars. Generally speaking, the formal shade cloth will not be moldy and rotten, but it will be in a wet and unclean state for a long time, and it will also breed bacteria and attach moldy sundries. Therefore, special attention should be paid to cleaning and drying. Even if you have to put it away when it is wet, you should open it to dry as soon as possible.

2. When cleaning the sun visor, please open it completely and do it when it is dry. When cleaning and maintaining, you should use the correct steps, don't lean against the awning, and don't press too hard. Please cut off the power supply and turn off the automatic control device before using the automatic controller to operate the outdoor sunshade.

3. Whether the sunshade needs cleaning depends largely on the environment (traffic density, air pollution, industrial pollution, etc.). ). When cleaning is needed, the requirements are as follows: (1) When the sunshade is dry, clean the dust regularly with a soft brush. (2) Branches, leaves and other similar objects should be cleaned in time. (3) If there is a small piece of dirt on the fabric, lightly brush it with a soft brush dipped in ordinary detergent, then rinse it with clear water for many times until there is no residual detergent on the fabric, and then open it to dry.

4. For the components made of high-grade aluminum alloy on outdoor awning, acid (such as hydrogen chloride) or abrasive materials (such as abrasive pad, sandpaper, sandpaper, pumice, etc.) should be used. ) cannot be used, which will damage the surface.

5, aluminum alloy frame cleaning should be handled with extra care, generally use soft cloth, detergent. And pay attention to the detergent used in high-grade aluminum alloy not to contact the fabric of awning.