Safety standardization implementation plan

Implementation plan for carrying out safety standardization activities

In order to conscientiously implement the national laws and regulations on safety in production, implement the responsibility for safety in production, lay a solid foundation for safety in production, comprehensively improve the safety management level of enterprises, and realize the systematization, standardization and institutionalization of safety management. According to the requirements of Nantong and Qidong municipal governments, our company has been identified as an enterprise in Nantong to carry out safety standardization work. In order to ensure the smooth development of this work, through research, the following implementation plan is formulated.

I. Guiding ideology

Thoroughly implement the Safety Production Law, Regulations on the Safety Management of Hazardous Chemicals, Safety Standardization Specifications and other laws and regulations, adhere to the principle of "safety first, prevention first, comprehensive management", adhere to the principle of treating both the symptoms and root causes, focus on the root cause, and strengthen the grass-roots and basic work of enterprise safety management. By carrying out safety standardization activities, we will further standardize safety production behavior, improve safety production conditions, improve safety management level, realize intrinsic safety and avoid safety production accidents.

Second, the standards reached

As a XXXX enterprise, the company should adhere to high standards and strict requirements in safety management, carry out work according to the requirements of safety standardization enterprises, and strive to pass the three-level audit.

Three. Activity progress

In order to ensure that the safety standard work can pass the national review, the following work plan is formulated according to the requirements of the superior safety supervision department and the actual situation of the company:

Time work content

2009 65438+1 October1. Leading group for safety standardization activities;

2. Carry out publicity and education on safety standardization activities and staff training to change ideas.

Early February 2009 1. Determine the development plan of safety standardization activities;

2. Organize and mobilize all employees to participate in safety standardization.

Mid-February 2009 1. The leading group of safety standardization has been trained and studied.

Late February 2009, 1. Investigation on current situation of safety management;

2. Determine the weak links in management and improve the target scheme;

From March 2009 to April 2009, 1. Compile safety standardization management documents;

2. Complete the identification of risk factors;

April 2009 to June 2009. Manage according to the standard management requirements;

2. Analyze and summarize the implemented management projects;

3. Correct the problems in the process of standardized management.

2009 1 65438+1mid-October1. Improve the existing problems;

2. Submit for acceptance.

Four, the establishment of safety standardization activities leading group

Team leader: XXX, deputy team leader: XXXX, and member: XXXXXX.

The leading group has a safety standardization activity office, which is located in the general manager's office.

Five, improve the safety production management system

According to the requirements of safety standardization specifications, the Ministry of Safety is responsible for establishing and improving various safety production rules and regulations, and all functional departments and workshops improve post safety operation procedures.

Seven, according to the law for all kinds of personnel training, do show certificates.

According to the requirements of safety standardization, all kinds of managers and employees are trained in safety, daily safety education is strengthened, and three-level safety education for new employees and other personnel is strengthened to ensure the training effect.

Eight, strict production facilities and equipment management.

1. Establish a safety production facility account.

2, the preparation of safety facilities, equipment maintenance plan, regular maintenance.

3, pressure vessels, pipelines and other special equipment regular inspection, complete documents.

4. Establish the inspection system for key equipment and key parts, and implement it seriously.

5. Establish a safe dismantling and scrapping system for production facilities.

Nine, the establishment of safety monitoring system, improve the ability of emergency handling.

1. Formulate the safety management system for key equipment and key parts to ensure the implementation of the system.

2, the establishment of key devices, key parts files and safety inspection written report system, clear functional departments, factories, workshops and teams and groups of monitoring responsibilities, regular, fixed-point inspection and supervision.

3. Establish a safety information monitoring center, and install flammable gas and toxic gas monitoring and alarm devices in places where dangerous chemicals are produced, stored and filled, as well as tank farms where explosions and fires may occur, and workplaces where inflammable and explosive dangerous chemicals are used. Install communication equipment in important workplaces and key parts, keep communication smooth, and monitor equipment operation, personnel inspection and duty performance in real time.

Ten, strict site management, standardize the safety behavior of the job site.

1. Conduct risk identification on dangerous links such as hot work, ground breaking, temporary power consumption, confined indoor operation, climbing operation and equipment maintenance, formulate control measures, and strictly examine and approve the registration. The above-mentioned operators should be equipped with and use safety protection articles, and their posts should be equipped with monitoring personnel.

2. Posting or hanging warning signs and billboards in inflammable, explosive, toxic and harmful places; Set warning signs and warning instructions at conspicuous positions of posts that may cause serious occupational hazards to inform the types, consequences, prevention and emergency treatment measures of occupational hazards; Warning zones and warning signs should be set up at the operation sites such as maintenance, construction and hoisting.

XI. Strict safety management in filling process

1. Establish inspection certificate and registration system for all aspects of sales and filling.

2. Before issuing the bill of lading, strictly check the relevant qualifications of the transport unit, vehicle, driver and escort. If any item does not meet the requirements, the bill of lading will not be issued.

3. Before the shipment of dangerous chemicals, the transport unit shall check the safety configuration of emergency equipment such as fire fighting, emergency repair and transport vehicle protection. Do not meet the conditions prescribed by the state, shall not be loaded with dangerous chemicals.

4. During the loading process, the driver, escort and operator of the transport unit should be present, and overloading, mixing and misplacing are strictly prohibited. After loading, the delivery unit must check and approve the loading weight (or liquid level), fastening and loading safety protection facilities, and it is forbidden to leave the loading unit if it does not meet the requirements.

5. Employees shall wear and use labor protection articles correctly according to relevant specifications and operate correctly according to operating procedures.

Twelve, timely investigation and management of security risks.

65438+

2, the establishment of hidden dangers rectification, technical transformation work responsibility system, according to the law to ensure the necessary investment in production safety. Establish an account for the extraction and use of special funds for safety, so as to achieve the unity of planning, finance and on-site engineering.

Thirteen, strengthen the control of dangerous sources

According to the Identification Standard for Major Hazard Sources (GB 182 18—2000), it is determined that the production site (workshop) of an enterprise does not constitute a major hazard source, but the control of the hazard source is not relaxed, and the hazard source is registered and filed, and it is tested, inspected and evaluated regularly. Install monitoring, measuring and alarm devices, and use information technology and other measures to implement safety monitoring to ensure safe operation.

Fourteen, improve the accident emergency rescue system, improve the ability of emergency management.

1. Improve the emergency rescue plan for potential incidents and unexpected accidents according to the Guidelines for Preparing Emergency Rescue Plan for Hazardous Chemical Accidents (Unit Edition) and the risk assessment results.

2, in accordance with the relevant provisions, the establishment of emergency rescue team, equipped with emergency rescue equipment. Toxic and harmful posts are equipped with rescue and protective equipment. In the absence of large-scale rescue equipment and professional team, sign an emergency rescue contract with the regional ambulance center and establish a linkage mechanism.

3. The emergency rescue team shall set up an accident alarm terminal at the station, which shall be connected with the main control room to keep 24-hour communication unblocked, so as to receive the alarm, dispatch and rescue in time.

4. Organize emergency rescue training and drills as required. The emergency rescue plan shall be reported to the local safety production supervision and management department and relevant departments for the record.

Carrying out safety standardization is a new requirement put forward by the state to strengthen safety production. Company leaders attach great importance to it, and relevant departments must closely cooperate and strengthen cooperation to ensure that safety standardization activities are completed as scheduled and required. Poor work, affecting the progress of the activities of the unit should bear the corresponding responsibility, and shall be investigated for the responsibility of the main person in charge of the department.

2009 1 month 15