5 CNC training summary report

# Report # Introduction By summing up the report, we can know the achievements and mistakes of past work and their causes, learn lessons and guide future work, so as to make fewer mistakes and achieve greater achievements in the future. The following is the numerical control training summary report, welcome to read!

1. Summary Report of CNC Training

This semester, I served as the teaching guidance for students' internship in CNC workshop. Finish the internship training teaching plan at the beginning of school, and carry out internship training according to the teaching plan. Mainly as a semester-long CNC lathe training task for xx mechanical class. According to the school's teaching arrangements, according to the actual situation of students to develop teaching plans and give practical guidance. So far, students' workshop training has been successfully completed. This short semester's training made me realize the joy of being a teacher and the responsibility and obligation as a teacher. First, the purpose of training

1, in order to combine theory with practice, improve students' communication ability with society, further improve students' ideological consciousness and practical ability, especially their practical work ability of observing, analyzing and solving problems, so as to cultivate students into high-quality skilled talents needed by society. Practical training focuses on using teaching results, testing learning effects, stimulating students' interest in learning, promoting the combination of theory and practice according to students' own conditions, and accelerating the transformation of students' theoretical knowledge into solid operational skills.

2. It is far from enough to cultivate students' practical operation ability only by classroom teaching. It is necessary to move from classroom to practice workshop, because students are faced with social employment.

Through personal practice, understand the actual processing principle and technology, familiar with the basic links of factory management, meet the processing requirements, and process real parts. Experience the basic qualities and requirements of a machining worker through practice, and cultivate their adaptability, organizational ability, coordination ability and working ability to analyze and solve practical problems.

As secondary vocational school students in the new era, we should keep in mind our historical mission, remember that the future of our motherland needs us, work hard to realize the great rejuvenation of China, establish a correct world outlook, outlook on life and values, improve ideological and moral cultivation and scientific and cultural cultivation, and be ideal, moral, educated and disciplined citizens.

Second, the training effect

1. During the training period, our training guidance is based on "safety first", which strictly requires our students to pay attention to safety issues and strictly abide by the rules and regulations of the workshop market. Pay attention to safety before class and emphasize it again during class. During the internship, no students were injured or other safety accidents occurred.

2. By directly participating in the operation process of machining, I learned practical knowledge, at the same time, I further deepened my understanding of theoretical knowledge and integrated theory with practice, which improved both theoretical knowledge and practical knowledge and achieved the basic purpose of training. The first is to let students understand and review theoretical knowledge. Familiar with the basic operation method and programming of CNC lathe (GSK928TE CNC system), followed by the actual operation of CNC lathe. With the foundation of theoretical study, the operation of machine tools becomes easy to understand, which ensures that students can complete some simple practical operations by themselves within one week, and with the improvement of operating skills, the solid processing will change from difficult to easy. Grasp the opportunity of school-enterprise cooperation, recommend some students to produce products in campus enterprises, and enhance students' corporate awareness. With the strong support of the leaders and the joint efforts of the students, this training successfully completed the teaching practice task, and the students basically reached the intermediate level or above. This training has improved students' practical working ability, laid a certain foundation for future study and work, and gained some valuable practical experience.

3. The success of this training is that each student can independently complete the courseware arrangement, and can also independently design, program and make handicraft parts. Every work is memorable to their training. Stimulate the enthusiasm for future study.

4, the students' internship training summary, we summarize the big and small things every day and every week. Classroom teaching and after-class communication. Through the students' summary, we understand the students' attitude towards this practical training, and we can see that the students cherish this practical opportunity and gain a lot of knowledge that is not available in books.

Third, look to the future.

You can't do it in one step, but you can do it one step at a time; It is difficult to make a blockbuster, but it is ok to do one thing well. Daily progress 1% is the accumulation from small success to great success, and it is the path to achieve life goals. Every day 1% progress is more important than every day. Go beyond yesterday every day, make progress every day and change every month. Write down the progress plus sign of 1% with your heart, so that your youth will be thick and full. Let's realize the Chinese dream with actions.

The achievements of this semester are obvious to all. The successful completion of various teaching arrangements is due to the strong support of school leaders and the active cooperation of students, so that such dazzling achievements can be achieved. Achievements can only be the past and experience, and we will continue to innovate in the next work and strive for it through the next level.

2. Numerical control training summary report

With the support and guidance of school leaders, 43 students from Class 09/KLOC-0 successfully participated in a four-week comprehensive training on graduation CNC milling. During the four-week study, students' knowledge of the composition ability of CAXA software, the understanding and programming of basic instructions for manual programming of NC milling, the basic operation of NC milling machine and parts processing has been greatly improved. The specific learning contents are as follows: In the training course of 1 1 week, students mainly learn the basic 2D drawing and 3D drawing of CAXA software. CAXA software is the most advanced CAD/CAM software in China at present, mainly for the education industry, and it is the designated entry software of CNC competition. Many students are learning CAD/CAM software for the first time, and have a strong interest in software learning, and their learning progress is very fast. In the first week of software learning, most students can draw all eight figures arranged in practical training, and a few students can even draw more complicated models of mobile phone case and camera, and the learning effect is very good.

During the training of 12 weeks, students mainly learn the basic programming instructions of NC milling programming. The G instruction and M instruction of the programming instruction at the beginning are difficult to understand and boring to remember. However, after combining practice with simulation, students' understanding ability has been enhanced, especially after simulation, they can see their own programming artifacts, which enhances their sense of learning achievement and has a better understanding of programming instructions, which makes the subsequent manual programming learning progress smoothly.

During the training of 13 weeks and 14 weeks, I mainly studied the basic operation of CNC milling machine, the operation panel of CNC milling machine, the program input of panel, the program execution in MDI mode, the program simulation and other operation learning, such as tool loading, tool alignment, workpiece clamping, workpiece alignment and workpiece processing. During the two-week training, all students were able to process two workpieces arranged by the teacher on time, which achieved the expected results.

Through this training, students' NC programming teaching, NC milling machine operation and processing ability have been greatly improved, and CAXA software drawing ability has also been strengthened. In the process of workshop training, students can skillfully operate machine tools and make programs and processes according to the drawing parts size, and most students can meet the training requirements. However, due to painting in the workshop two weeks before this training, there are only two weeks of computer operation time, each machine tool has six to seven students, and the students have less time to operate the machine tools, which leads to some students' unskilled operation and relatively simple workpiece processing, and fails to achieve the comprehensive training effect.

3. Numerical control training summary report

The one-month NC machining training ended in a blink of an eye, but the feeling it brought me will remain in my heart forever. Generally speaking, this training is very interesting and will definitely provide me with important experience in my future study. I'm afraid we won't have such an opportunity to experience this life in the future, and I'm afraid it's hard to have such luck to experience how everything around us is made. CNC machining training brings us not all the operating skills we have come into contact with, nor is it just the ability that we need to exercise through several types of work. More importantly, we need everyone to feel, reflect and encourage themselves according to their own situation after the internship, so that the internship can achieve his real purpose. As we know, "NC machining training" is a practical technical basic course, and it is an important compulsory course to learn the basic process methods and technologies of mechanical manufacturing and complete the basic engineering training. It not only enables us to acquire the basic knowledge of mechanical manufacturing, understand the general operation of mechanical manufacturing and improve our operating skills and hands-on ability, but also strengthens the exercise of integrating theory with practice, improves the engineering practice ability and cultivates the engineering quality. In this lathe operation, due to the short time, I failed to master programming skillfully. In the future, we should study hard, improve the programming level and strengthen the improvement of the operation level. In a word, this NC training has really improved the level than before, especially in practical operation. Unfortunately, the time is a little short. Through this training, I also found my own shortcomings, mainly in terms of operational level and practical experience.

Under the guidance of the teacher, we learned how to operate the CNC lathe, the problems that should be paid attention to when operating the CNC lathe, and also learned programming, knowing the meaning and application of G instruction, M instruction, T instruction and S instruction, and learning how to set the knife. In the process of internship, I deeply realized that in this industry, care and patience are needed. If you are not careful, you will collide when machining the workpiece, and even the knife will collapse. What's more, the turning tool is broken and the workpiece is bent, which makes the workpiece produced by ourselves become waste. Therefore, internship is a test of our patience and carefulness, and it is also the most important moment to increase our experience. In fact, the teacher talked the most during the training. Or safe operation, in the final assessment, safe operation is also the main assessment point. Safe operation includes many aspects, such as wearing training clothes and girls wearing hats when entering the training room. In the process of machine tool processing, the door must be closed, and there should be one person to watch and operate when operating. And those tools can't be put on the machine tool or left in the machine tool, which is very dangerous. In a word, if you want to process a qualified part, you should do it attentively and boldly in every process and try every method, so that you can find and solve the problem! Be careful and do more exercises. As the saying goes, practice makes perfect. Many things have to be tested by yourself. There are many things that are not in books and can only be realized in practice. Talking on paper will only lead people into misunderstanding, and practice is the eternal teacher.

It not only brings us experience, but also lets us know what work spirit and serious style are. In my future study career, I should learn from real people and become an excellent professional in the future. This internship made me understand what it means to "get it on paper, and practice makes true knowledge". As beginners, we will definitely experience a process of constant setbacks, which is a kind of wealth for us. Only through this process of continuous accumulation can we learn this technology well. We operate CNC lathe, that is, through programming to control the lathe for processing. Through the operation and programming of CNC lathe, I deeply felt the convenience, accuracy and quickness of digital control. As long as the correct program is input, the lathe will perform the corresponding operation. The CNC lathe is not so easy.

After this training, I deeply understand that training is to apply theoretical knowledge to practical operation, which is not only the training of practical ability, but also the review, consolidation and extension of theoretical knowledge. Through this training, I also found many shortcomings of myself. Mainly due to the lack of programming level and practical experience. But we did learn a lot, and let us know how to finish a job seriously while improving our hands-on ability. I will work hard and strive for better results in the future.

4. Numerical control training summary report

How time flies! In a blink of an eye, my long-awaited training week is over. After two weeks of training, I learned a lot of knowledge. In retrospect, the training these days has really made great achievements. With the patient teaching and encouragement of the professor, the internship task was successfully completed and the expected goals and requirements of the internship were achieved as a whole. This general exercise gave me a comprehensive and systematic practice opportunity, which consolidated my superficial knowledge and strengthened my practical skills. I further realize from practice that the disassembly and assembly of CNC machine tools are tense to cope with our CNC repair specialty. For me, superficial knowledge is not enough in my future work, and I must be able to apply the surface to practice. The professor's requirement for us is that we must end the key of scanning practice with a serious and rigorous position and a high degree of seriousness. On the first day, when the professor went to the training room, he told us about the related accidents in law and training. The professor began to explain the basic knowledge of patching locksmiths and the tension of CNC patching. In order to let us know how to do better in future training, the professor emphasized that we should take notes during disassembly and asked us to keep a training diary every day. In this training, I learned a lot, such as patience. I was always in a hurry before, so we had problems in the first assembly. After the assembly, we added two more nuts. It requires accurate assembly. If it is not accurate, if it is only unstable, it will cause huge economic losses or death. We were very automatic at first, but later we felt a little rigid when we disassembled it more often. Then I thought about it. Probably just beginning to feel fresh. So I patiently painted that when we assembled the spline of the spindle box, we could never install it, and then there was a fire, but the more the fire, the more we could not install it. Afterwards, I calmed down and put it together. From this incident, I realized that patience is really tense.

Determination and belief are also very nervous, and it is difficult to achieve great things with foreign determination and belief. Celebrities have said that determination and belief are the key to success. Our CNC repair major is not familiar with the obstacles or problems we will encounter in school in the future. We can only succeed if we are bold and cautious, act boldly on the basis of knowing the truth, and be full of determination and belief.

What I learned from this training is how to use new things. We are now in a period of rapid growth. Whether we can use new things accurately and efficiently will largely determine whether we can succeed. Secondly, there is the topic of our position. If we treat our work from a good standpoint abroad, no matter how high our skills are, we will be recognized. It is the position that determines everything.

In this training, what I understand most is that surface is related to reality, and practice is the only criterion to test the true meaning. Although superficial knowledge is tense, the surface without practice is empty talk. Only by truly combining appearances with practice and applying superficial truth to practice can talents show their talents better. I used to think that I could read and understand, but after this training, I finally realized that what I learned in a foreign country did not belong to you. As the saying goes, "It is better to believe in books than to have no books." We should read good books, not dead books. Today's society needs people with strong copying ability, not people with good looks. This is even more tense for our higher vocational students. The goal of our school is to cultivate talents with first-class vocational skills.

During the training, I feel that I also have many shortcomings, such as my job is not automatic enough, my study is not serious enough and so on. I believe that I will get rid of these weaknesses in the future after agreeing to do my best. I am convinced that the practical experience gained during my internship will benefit me for life and will be constantly verified in my practical work after graduation. I will continue to understand and comprehend the knowledge I have learned in practice, and continue to use the superficial knowledge and practical experience I have learned in my future practical work to enrich my personal cost and living cost. Strive to realize my ambition and bright future. How can you see a rainbow without experiencing wind and rain! "I believe that my firm determination and strong will will will surely realize my beautiful ambition and embark on my own road to success.

5. Numerical control training summary report

Practical training is to apply the theoretical knowledge learned to objective practice, so that the theoretical knowledge learned can be used. Learning without practice equals zero, and theory should be combined with practice. On the other hand, practice can lay a foundation for finding a job in the future. Through this period of internship, I can learn something that I can't learn in school. Because the environment is different, the people and things you contact are different, and the things you learn from it are naturally different. Learning from practice, learning from practice, China's economy has developed rapidly and joined the WTO. The economy at home and abroad is changing with each passing day, and new things are constantly emerging every day. While there are more and more opportunities, there are also more challenges. The more China's economy is integrated with the outside world, the higher the demand for talents will be. We will not only learn what we have learned in school, but also learn other knowledge from life and practice. The one-week internship is over. In a short week, I have a more comprehensive understanding of CNC system and a deeper understanding of CNC. After this internship, we have mastered the programming of NC program and the operation of NC machining, and gained a lot. In this training, I gained some experience:

1. Through this internship, we learned about the production mode and technological process of modern CNC machine tools. Familiar with the forming methods and main processing methods of some materials, the working principle and typical structure of the main equipment used, the use of fixtures and measuring tools and the safe operation technology. Understand the knowledge of CNC machine tools and the application of new technologies, new processes and new equipment in machine tool production.

2, in the production, assembly and debugging of CNC machine tools, with preliminary independent operation skills.

3. In the process of understanding, being familiar with and mastering certain basic knowledge and operating skills of CNC machine tools, I have cultivated, improved and strengthened my hands-on ability, innovative consciousness and innovative ability.

4, this internship, let us understand that we should be careful, not careless. At the same time, it also cultivates our indomitable nature and perseverance that we will never give up until the last second.

5. We have cultivated and exercised our views on labor, quality and economy, enhanced our awareness of observing labor discipline, safety technical regulations and caring for state property, and improved our overall comprehensive quality.

I learned a lot through this short and substantial internship. I also benefited a lot from my internship classmates. Without selfish help, we sincerely encourage each other to cheer and share the pressure of work and the joy brought by success. Training is more like a group activity, which brings us closer and fills the distance that once existed. The charm of collectivism has been thoroughly demonstrated, and even students have little chance to get along in college. Thanks to the machining practice for giving us such an opportunity, the one-week machining practice came to an end in Metal Echo. Generally speaking, this one-week machining internship has ended.