Metal three-dimensional luminous character metal character

The introduction of metal three-dimensional luminous characters, I believe that advertisers are no strangers to three-dimensional luminous characters, and the technology of making luminous characters is taught everywhere on the Internet. Of course, it's hard to tell whether it's true or not. Many people say that a company is cheating, and so on.

Metal plane three-dimensional luminous characters. The plane three-dimensional luminous characters are divided into acrylic panel and resin plane luminous characters.

Metal acrylic panel luminous character

The luminous feature of metal acrylic panel is that the panel is made of acrylic light-transmitting plates with various colors, and the edges are made of metal, so it is essential to make a three-dimensional figure with the steps of making faces, bottoms and edges. Making this character is much simpler than metal characters, and the panel and bottom plate will be carved with a carving machine. Now most engraving machines are also used to engrave these materials. First, the graphics to be made are designed in the computer and input into the control system of the engraving machine for operation. Pay attention to the scaling of files during engraving. Usually, the character panel. The bottom plate is made of PVC board and aluminum plastic board. The materials for wrapping are generally aluminum, iron sheet, stainless steel, and some need aluminum-plastic wrapping strips. It's easier to bend with aluminum and thin iron sheets. These tools are also available in Ziyi company. They were mentioned in the previous introduction of metal figure making, and will not be repeated here. If stainless steel is used as the housing

Metal word edge, the practice is the same as the previous introduction. Now, different shapes come from materials. In addition to plates, there are also profiles, and Ziyi aluminum edging of Ziyi Company is widely used. When making plates, it is necessary to use aluminum-plastic edge strips to buckle the panels and connect the edges. Generally, aluminum-plastic edge strips are easy to age, fade and deform after a long time, which is difficult to master. The profile is relatively good, and there is no need for aluminum-plastic wrapping. The shape of the material has a right-angle buckle edge, so just buckle the panel directly. The characters made of this material have a good effect, but the places that need to be opened when bending need to be handled well, and fillers need to be added when the opening is large. Usually, this kind of material is sold in strips, which is not very convenient to transport and needs to be reinforced with wood squares, which is more troublesome. Easy-forming aluminum edging has also been seen in many exhibitions. It has two sides, the thick side is V-shaped, the panel is buckled, and the thin side is buckled on the bottom plate, which is convenient for the right-angle code to be tightened and fixed. The use of this material is similar to that of profiles, except that the buckle edge is literally a facade, and the connection between the panel and the surrounding edge needs to be glued. If you master this, the words you make will be fine. This material is sold in rolls and is relatively convenient to transport.

When the edge is connected to the bottom of the panel, whether it is aluminum-plastic or profile or easy-to-form aluminum edge strip, glass glue or other glue for sticking acrylic should be used, and dry glue should be used to prevent the material from deforming. At present, some advertisements are made of a square board with many holes punched in it. After the font comes out, glue it and insert a small stick into the hole along the edge of the word to fix it. The words made by this method are more standard and beautiful.