Construction method of paper wallpaper

The basic method is the same as general wallpaper construction.

note:

1, paper wallpaper is fragile, so be extra careful during construction.

2. Cut the nails dry before construction to avoid scratching the wallpaper.

3. Keep the wallpaper flat and clean before construction.

4. Don't wash the surface with water. If stains are found, use a sponge to absorb water, unscrew part of the water and keep a certain humidity. Then gently wipe it with a wet rag.

5. Never soak paper wallpaper in water.

6. Be careful not to let any adhesive stick to the surface of the wallpaper, otherwise the wallpaper will change color or fall off.

7. Once the glue sticks to the wallpaper surface, it should be cleaned with a sponge immediately. If the glue dries, it will destroy the printed surface.

8. Compared with other wallpaper, the concentration of glue is thinner, which is convenient for construction.

9. The paper has a large expansion coefficient after gluing, and the seam is easy to shrink and crack after sticking to the wall. There are two solutions:

A. When the wall is dry, use a wet sponge to wipe the wallpaper surface from the middle, leaving 2-3 cm for each seam, without wiping water.

B add white glue or super glue to the joint.

Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~