Laying your own floor tiles is actually very simple!

Laying your own floor tiles is not complicated. You only need to master some basic skills and tools, and you can do it easily! The following is a detailed introduction for you.

Prepare tools and materials

Floor tiles need to be prepared with floor tiles, tile glue, brick joint agent, level meter, brick cutting tools, rubber hammers, brushes, mops and other tool materials.

Preparatory work/about to start work

Before laying floor tiles, the ground must be dry, flat and free of sundries. If the ground is uneven, it needs to be leveled with cement first.

Design layout

Before you start, you need to plan the way and direction of laying floor tiles, which can help you figure out how many bricks you need and ensure that the final result meets your expectations.

Laying floor tiles

Before laying the floor tiles, you need to apply a layer of tile glue, and then gently tap each brick with a rubber hammer to ensure that they are firmly adhered to the glue. Check the levelness of each brick with a level and remove the excess glue with a mop.

Cutting floor tile

When it is necessary to build bricks at corners or edges, it is necessary to use a cutting tool for cutting. Pay attention to ensure the correct size and angle, and remember to fillet.

Filling brick joint

After the tile glue is completely dried, it is necessary to fill the brick joints with brick joint agent. Fill the gap evenly with a brush and remove the excess brick sealant with a mop.

Finishing and cleaning

After the brick joint agent dries thoroughly, you need to clean the floor with a wet mop to make the floor tiles look brand-new!

skill

It takes patience and skill to lay your own floor tiles. If you have no experience, please consult a professional! Remember to take safety measures, wear gloves and goggles, and protect yourself is the most important thing!