5 work reports on production safety inspections

#report# Introduction With the improvement of personal quality, the use of reports has become the norm in daily life. When we write reports, we must pay attention to the language to be accurate and concise. The following is a safety production inspection work report compiled by kao.com, welcome to read!

1. Safety production inspection work report

In response to the National Day holiday, in order to effectively prevent and curb the occurrence of various safety production accidents, the company has effectively done a good job in safety production during the holiday In order to ensure the company's stable production safety situation during the Double Festival, a comprehensive company-wide safety production inspection was conducted on September 28. The inspection results are now reported as follows:

1. Inspection Objectives

In order to further strengthen employees' awareness of production safety, implement the safety production management policy of "safety first, prevention first, comprehensive management", strengthen the safety production environment, and ensure that every hidden danger is discovered and rectified. hidden dangers to completely eliminate the occurrence of safety accidents.

2. Inspection situation

The company safety officer, the security section chief and the safety officers of each department went to the site to conduct an investigation of potential safety hazards, the use of labor protection supplies for workers, factory construction, Nine items including equipment and facilities have been comprehensively inspected, and the problems discovered are now reported as follows:

3. ***There are problems

1. Regular safety inspections of various departments have not been completed (Only the management department conducted inspections from June to September) Note: The email sent to the heads of each department on 6/26 contains the relevant periodic safety inspection forms for each department;

2. Electrical boxes within the jurisdiction of each department , there is a lot of garbage and dust in the control cabinet;

3. The safety emergency indicator lights in the areas under the jurisdiction of each department are broken. Please check them all and repair the broken ones;

4. The on-site rotating equipment has no protective cover and no rotation mark;

5. The on-site pressure gauge can only see the pressure, but cannot know the normal pressure range of the equipment. It is recommended to mark the normal range value;

6. Some equipment is severely corroded, oil-free, dusty, and the equipment is poorly maintained;

7. Each pipeline is not marked with what materials it contains and its flow direction.

IV. Specific problems in each department

Management Department:

1. There are no safety training records for restaurants and cleaning staff;

2. The door of the electrical box cabinet in the small restaurant was blocked by a locker;

3. The fire hydrant at the stairwell on the fourth floor was used to block the door;

4. The first floor of the office Water leaks on the north side.

Materials Department:

1. The door handle of the low-voltage and lighting electrical box cabinet of the crusher is broken;

2. The stairs from the first floor of the crusher to the main control room The lighting is poor, and the platform has no skirting boards. People have poor visibility when going up and down, and are prone to collisions;

3. There is a dead mouse in the control box of the screening machine in the C reservoir area. Check and seal the loopholes.

Engineering Department:

1. There is no cover above the reservoir in the air-conditioning boiler room of the dormitory building;

2. Cabinet No. 2 in the air compressor room There is a power cord* exposed inside;

3. The access and cleaning form posted at the door of the power distribution room has not been filled in truthfully (the latest date is January 2015);

Production Department :

1. It has been found many times while driving that the hook has no anti-slip buckle. It is recommended to check all the hooks. If the inspection is found but the safety cannot be effectively guaranteed, all repairs should be carried out;

2. K furnace receipt machine The cooling water valve is severely corroded;

3. Waste oil is placed in the high-temperature area next to the K-furnace receipt machine;

4. The K-furnace receipt machine and cold ash bucket cooling water pump power supply The wire protection sleeve is damaged;

5. The cover above the cooling pool of the cold ash bucket is not covered;

6. Water leaks above the main motor of the 2# cold ash bucket, directly corroding the motor shell, 1 #The main motor chain protective cover of the cold ash barrel was damaged by re-grinding, and the chain was severely rusted;

7. The handle of the control cabinet of the 1# cold ash barrel electrical box was broken.

Please ask the heads of each department to take responsibility for rectification of the above-mentioned *** problems and specific on-site problem points, and give a reply to the safety officer of the General Manager Office with a time limit for rectification, and confirm it when it is due. Completion status.

2. Work safety inspection report

In order to further promote the in-depth investigation and management activities of hidden dangers in production safety and effectively strengthen the management of safety and civilized supervision of construction projects of our project department, according to the " Notice on the Issuance of the Implementation Plan for the Major Safety Inspection of AVIC's Asset Management Division" (Zhizi [20xx] No. 70), "Notice on the Issuance of the Implementation Plan for the Major Safety Inspection of the Asset Management Division of AVIC" (Zi Zi Xin [20xx] No. 2) In accordance with the requirements of the document, combined with the current situation faced by our project department in supervision of production safety management, on September 15, 20xx, AVIC Guizhou Asset Management Co., Ltd. and Guizhou Aviation Engineering Construction Supervision Co., Ltd. went to the Anshun Yunma Supervision Department construction site to discuss Supervised the on-site production safety management and conducted a large-scale inspection like a dragnet.

1. Inspection situation

This inspection focused on the information involved in the "AVIC Industrial Safety Production Safety Inspection Implementation Plan Notice" issued by the supervision unit in the early stage. The implementation of the safety responsibility system, safety education, safety technical briefing, and rectification of hidden dangers were inspected. Judging from the inspection, the safety production work of Yunma Supervision Department met the requirements. It conducted self-examination and self-correction on the construction site before the major inspection, and some safety hazards and civilized construction issues were rectified in a timely manner.

2. Main problems existing in the inspection

(1) Basic management of production safety

Inspect the safety education, training and employment status of full-time production safety management personnel with certificates , safety funds, safety hazard investigation, safety protection measures and other special safety construction plans are implemented as required. Construction facilities and equipment such as material hoists, construction lifts, cages, and scaffolding at the construction site are inspected as required to eliminate potential safety hazards and take protective measures against the edge of the foundation pit to meet the requirements. Individual workers who did not wear safety helmets, hung safety ropes and violated regulations have been stopped and rectified.

(2) Safety management of hazardous chemicals

The storage, use, and disposal of on-site chemical flammable and explosive materials meet the relevant requirements for safe production, and the work procedures are clear and reasonable.

(3) Fire safety management

According to the requirements of the notice, fire protection work has been focused on investigating and rectifying; the construction site fire protection, living area, various materials processing and storage of hazardous chemical materials warehouses All employee dormitories have established a fire prevention management system as required, with sufficient fire prevention facilities and fire extinguishing equipment. All fire fighting equipment is in good condition and emergency facilities are effective.

(4) Safety management of electrical operations

The power distribution and transformation operations at the construction site comply with the relevant requirements of electrical safety regulations; the laying of electrical lines and line splicing in power distribution cabinets and other facilities meet the requirements of the regulations ; Temporary electricity used for on-site construction meets safety requirements. Some temporary power lines are chaotic and potential hazards such as fires and casualties have been rectified and rectified. Insulating tools and supplies for on-site construction are complete and effective.

Judging from this safety inspection, the safety production work of the Yunma Supervision Department basically meets the requirements. There are still weak links and outstanding problems in the safety production management work. In response to the existing problems, the inspection team asked the Supervision Department We must attach great importance to early deployment, early arrangement, and early implementation. The person in charge of the unit must organize carefully, deploy carefully, plug loopholes, check blind spots, and take various safety precautions to ensure that the construction site environment meets standards and eliminate safety hazards. Those who can make rectifications immediately will be required to make rectifications immediately. Those who cannot make rectifications immediately will be required to make rectifications within a time limit. Construction sites with serious safety hazards will be ordered to stop construction. The inspection team also required all units to enhance their awareness of production safety management, actively play the management role of the supervision department, strengthen the responsibility system for production safety, and effectively strengthen management to ensure the steady development of safe production and civilized construction.

3. Safety Production Inspection Work Report

With the support and care of the Xicheng Development Zone and various units, our company has implemented a higher-level, all-round approach to the company’s safety Production was carried out to further requirements. The country's security system has been fully implemented and certain achievements have been achieved. It was inspected by relevant units and received favorable reviews.

Our company has mainly done the following to manage safety production:

1. Unify and improve safety awareness and do a good job in publicity and education

1 , the company's legal person is the first person responsible for safety. Every Friday afternoon, managers from various departments are organized to hold a regular safety production meeting to summarize the safety work status of the workshop over the past week, put forward the key points and requirements for safety production work next week, and make layout and arrangement.

2. Focus on key points, leadership, management, ask questions, and focus on learning and communicating relevant safety production documents from superiors, conduct studies and discussions, and require leaders of various departments to further improve and strengthen safety production management, Instill safety awareness into every employee's mind, improve employees' safety awareness and concepts, put an end to "three violations", and ensure the smooth progress of safety work.

3. Carry out publicity and education on the production site. Led by the production safety leadership organization, the company's comprehensive office organizes publicity and education work. The company's safety team regularly holds all-management meetings to convey and implement the spirit of various documents, safety production rules and regulations, and safe operating procedures. It also arranges and posts safety production-related slogans and signs at the production site to further enhance employees' safety awareness and promote publicity. And education work goes horizontally to the edge and vertically to the end, and everyone needs to know the effects and purposes.

2. Pay attention to the safety management organization, strengthen safety management, inspect frequently, and ensure safety

1. The company established a safety production leading group and issued safety production documents to ensure that there are rules and regulations. Accordingly, the responsibilities are in place and the management is networked. Ensure the normal work of safety agencies and ensure safe production. The production department has also established a safety leadership group, with the production director as the team leader, the workshop director as the deputy team leader, safety officers, team leaders and all employees participating. Responsibility management is carried out after the responsibilities are divided, divided and sectioned, and implemented in management. The "one-vote veto system" ensures that responsibility and management are assigned to each person.

2. In addition to the daily work of the company's safety team, the company's safety production leading group conducts regular or irregular inspections of each workshop. For departments that fail to meet the requirements, the workshop requires rectification within a time limit, and conducts assessment and notification.

3. Do a good job in on-the-job training and hold a certificate to work

Implement the leading concepts of "people-oriented", "prevention first, safety first, comprehensive management", strengthen and increase the overall Safety ideological education and on-the-job training for employees, the company's safety management personnel also regularly go to relevant municipal units to receive safety training and education to improve the safety management personnel's understanding of safety work and work quality level, especially the training for special types of workers, to achieve Send training without a certificate and retrain after expiration, put an end to illegal behaviors of working without a certificate, and ensure production safety in production.

Available for work.

IV. Create a civilized production site and improve the production conditions of employees

1. The production site should be clean and tidy, with clear windows and clean machines, without making noises or smoking, and be strict with the canteen Calculate costs and provide free buffets to each employee.

2. Regularly distribute labor protection supplies (work clothes, labor protection shoes, gloves, glasses, etc.) to employees to ensure that employees achieve "three no harms" during production and protect themselves.

Our company has not had any major casualties in recent years. This is inseparable from the guidance of the leaders of the Municipal Labor Bureau, District Safety Department, and Development Zone. Safety production is related to the enterprise and the company. For the safety of people’s lives and property, the state has specifically determined the purpose of “safety first, prevention first, comprehensive management”. Although the purpose of business activities is for economic benefits, safety work must not be neglected for the sake of benefits.

Our company’s leaders have always attached great importance to safety production and safety management, giving priority to organizational construction, system establishment, production environment, and economic expenditure. As members of the company’s safety production leading group, we , will be further adjusted and strengthened to bring safety production management to a new level.

Thank you all leaders. Please criticize and point out any areas where the safety work in the above report is not in place, and provide valuable opinions on our company's safety production work.

4. Safety production inspection work report

In 20xx, the safety production work of our hospital was under the leadership of the County Health Bureau, the town party committee, and the town government, and always adhered to the "safety first" 1. The safety production policy of "prevention first" starts from raising awareness, strengthening leadership, improving systems, strengthening management, conducting in-depth safety inspections, and actively eliminating hidden dangers of accidents. Through the joint efforts of all employees of the hospital, the safety responsibility goals issued by the county bureau have been successfully completed and no accidents have been achieved. The summary is as follows:

1. Raise awareness, strengthen leadership, and implement the safety production responsibility system at all levels.

Safety responsibility is more important than Mount Tai. Safety production maintains the lives of employees and the safety of national property; it is related to the rise and fall of our hospital's economy. Our hospital has always attached great importance to safety work, and has always listed it as a "top-level" project and placed it on the important agenda. The main leaders personally grasp it, the leaders in charge of specific tasks, and all positions and majors grasp it together, forming a situation of joint management and comprehensive management. . Starting from strengthening learning and raising awareness, we will comprehensively improve our hospital's employees' awareness of the importance of production safety; promptly convey the spirit of the county bureau's instructions on production safety, and often use safety accident cases that occur in this system to educate everyone, especially We must pay close attention to the study of the "Safety Production Law" and related laws and regulations. Through study, all employees in the hospital realized that safety production is an important and meticulous work. A little carelessness may lead to accidents, thus further strengthening the self-protection ability of employees.

Strengthening leadership and improving organization are the basis for production safety management. The production safety leading group has been adjusted with the dean as the team leader, the leader in charge as the deputy team leader, and the heads of the security department and related departments as members, and The establishment of full-time (part-time) safety officers has formed a safety production management system that extends horizontally to the edge and vertically to the end, so that safety management work is not disjointed in the organization.

In order to further implement the safety production responsibility system and implement responsibilities at all levels, the dean and the heads of each department signed safety production target responsibility letters, so that the responsibilities were clear and the responsibilities were assigned to the people, and good results were received. Effect.

2. Formulate safety production rules and regulations to standardize safety work.

As the saying goes: "No rules, no rules." In order to ensure the safe production of our hospital, since the end of last year, our hospital has formulated a series of rules and regulations in accordance with the relevant regulations of the county bureau and combined with the actual characteristics of our hospital's safety work. It ensures that the safety work of our hospital is in accordance with the rules, so that all employees can achieve orderly daily work and standardized behavior.

In order to ensure the implementation of various safety production rules and regulations, the relevant departments and responsible persons of the hospital insist on regular inspections. Any violations discovered during each safety production inspection shall be dealt with in accordance with the relevant provisions of the safety production rules and regulations. Hold accountable. Using the system to manage people not only educates everyone, but also effectively promotes the consciousness of employees to abide by rules and disciplines, ensuring the daily safe production of our hospital.

3. Strengthen publicity and training and enhance safety awareness.

Improving the safety quality of our hospital’s employees is the foundation for improving our hospital’s safe production. Since the beginning of this year, our institute has made full use of regular safety production meetings, publicity boards, safety knowledge competitions and other forms to conduct safety education for employees, and organized employees to study the "People's Republic of China and National Security Law", "Work Safety Law" and other related Laws, regulations, study relevant safety production regulations and hospital safety production rules and regulations, and organize employees to take safety production knowledge and skills examinations. Only those who pass the examination are allowed to take up their posts. This is to familiarize them with the safety requirements of their positions and improve their safe operation skills and self-protection awareness. .

4. Strengthen supervision and inspection and focus on rectification of hidden dangers.

As the saying goes: "Whether you sharpen your knife or chop wood by mistake," you would rather spend more time checking safety and eliminating hidden dangers than operating in violation of regulations. In the daily work of our hospital, everyone feels the importance of safety inspections. Necessity and importance, and the thoughts of paralysis, fluke, improvisation, and perfunctory must not be tolerated. Only through inspection can problems be discovered. The department heads and the hospital's general duty officer insist on conducting safety inspections on site before and after work every day. At the same time, our hospital also actively accepts inspections from the safety supervision and management department. Regardless of whether the hidden dangers are investigated internally or externally, rectification will be carried out in accordance with the "three determinations" principle and efforts will be made to create a good safe production environment.

In short, although we have achieved some results in safety production this year, there is still a certain gap with the requirements of the county bureau, town party committee, and town government. We will seriously sum up our experience and make our hospital work safely in the coming year. Go to a new level and contribute to the creation of a harmonious hospital.

5. Safety production inspection work report

In order to effectively do a good job in transportation safety management, we must strengthen safety inspections, hidden danger inspections, and hidden danger management work in a practical and detailed manner. , do it well. Effectively prevent various accidents from occurring, in accordance with the spirit of the "Emergency Notice of the Municipal People's Government Office on Concentrated Work Safety Inspections" and the "Emergency Notice of the County People's Government Office on Concentrated Work Safety Inspections" forwarded by the Municipal Transportation Bureau and work requirements, the report on the centralized inspection of production safety in our bureau is as follows:

1. Leaders pay attention to it and implement it comprehensively

In conjunction with the Safety Committee meeting on June 26, our bureau The meeting spirit of the county-wide centralized inspection of production safety was held in the hotel. Our bureau attached great importance to it and promptly formulated the "Implementation Plan for Concentrated Inspection of Transportation Safety Production" and established a leading group for the inspection of transportation safety production. , with the director as the team leader, the relevant deputy director as the deputy team leader, and the members are composed of relevant units. The deputy director is specifically responsible for the safety inspection. On July 9, our bureau promptly held a transportation system safety production work meeting, conveyed the spirit of the county safety committee's safety production work meeting, and at the same time issued the "Implementation Plan for Concentrating the Transportation System Safety Production Inspection Work" and arranged Centrally carry out the work of safety production inspection, requiring all relevant departments to take immediate action, combined with the work of "cracking down on illegal activities and correcting violations", conscientiously carry out self-examination and self-correction, identify safety hazards, pay close attention to implementation, and do a good job in safety publicity.

2. Act quickly to carry out safety inspections in key areas

On July 10, the Transportation Bureau took the lead and cooperated with the County Transportation Management Branch and the Traffic Police Brigade to carry out a joint road traffic safety inspection Law enforcement inspection. This joint law enforcement inspection mainly focused on road traffic safety at four passenger transport companies. The inspection contents mainly include:

1. Implementation of the spirit of the production safety meeting;

2. Safety meeting minutes;

3. Whether safety inspections and records are carried out;

4. Safety production related systems;

5. Investigation and management of hidden dangers Situation etc.

During the inspection, it was found that many problems were still outstanding, mainly including:

1. The implementation of "three no-enters and six no-exits" at the company's rural line stations is in name only.

2. Most of the bus drivers of the Bus Co., Ltd. do not have road passenger transport qualification certificates to engage in operation.

In view of the safety hazards existing in the two companies, the joint law enforcement inspection team promptly proposed rectification plans to the companies, and the rectifications were completed within a time limit, and the rectifications did not leave any future troubles.

3. Fulfill responsibilities and ensure that hidden dangers are rectified in place

By carrying out safety inspections, our bureau promptly followed up on the identified safety hazards and re-inspected the two companies. , rectification status of hidden dangers.

1. The company has made rectifications in place and arranged dedicated personnel to be on duty at the rural line station booths to do a good job of registration and inspection of vehicles entering and exiting the station.

2. In view of the problem that most of the bus drivers of the Bus Company do not have professional qualification certificates, the county transportation management branch has communicated with the municipal bureau and organized 10 drivers without professional qualification certificates to conduct In terms of training and examination, 5 people have already passed the examination, and the other 5 people will take the examination again this Friday before they can take up their posts.

3. Our bureau’s ferry has been in disrepair for a long time, its hull is severely corroded, and there are safety hazards. The bureau invested more than 15,000 yuan to repair and maintain the ferry, and equipped it with life-saving and fire-extinguishing equipment to eliminate safety hazards in a timely manner. , the ferry is currently in operation.

4. In the next step, we will continue to increase the intensity of transportation safety inspections, carefully ensure that no blind spots are left in the investigation of hidden dangers, and no future troubles are left in the rectifications. We will establish and improve various safety rules and regulations to ensure that our county Transportation is safe and smooth.