How to clean the dust in the ceiling lamp belt groove

1. It can be cleaned with a vacuum cleaner: the ceilings of living rooms, bedrooms, corridors and other spaces are mainly dusted. Usually, tools such as soft cloth can be used to remove surface dust. In addition, ceiling profiles and lamp troughs with perforated decorative patterns can be cleaned by using a long-handled vacuum cleaner with a thin mouth, which is easy to accumulate dust in depressions.

2. You can wipe it with a wet rag: there will be oil stains on the ceiling of the kitchen, so scrub it with a soft and absorbent cleaner mixed with a little water. Pay special attention. Do not scrub with tools such as hard cloth and cleaning ball, or you will leave Suu strips or damage the gusset on the bright panel.

You can use a long stick tied with a feather broom, and often use the feather broom to remove dust.

Extended data

Matters needing attention in cleaning ceiling lamp

Before cleaning lamps, please turn off the power supply, and then remove the lampshade or lamp holder. The newly used light bulb should be naturally cooled to room temperature before cleaning, so as to avoid explosion due to sudden temperature change. Structure or replace its parts, after cleaning, install lamps as they are, remember to check carefully, and there can be no missing or misplaced parts.

When cleaning, remember not to change the structure of the lamp or replace its parts at will. After cleaning, install the lamp as it is. Remember to check it carefully. There must be no missing or misplaced parts.

Do not switch on and off the heating module frequently, and ensure that there is no big vibration around during operation, otherwise the service life of the light bulb will be affected. When turning on the light bulb after a long period of non-use, please check the circuit and the light bulb, and turn it on for 3-5 minutes to see if it works normally.