Method for manufacture desk of old house

The method of making desks in old houses can be divided into the following steps:

Step 1: Prepare.

First of all, you need to prepare wood, power tools, hand tools, paint or varnish, screws and other related materials. After the preparatory work is completed, the wood should be cut, stacked and adjusted after cutting.

Step 2: Design the hinge of the table.

The hinge part of the table needs to be designed according to your own needs. The design of hinge should pay attention to the adjustment of the vertical position of the table top and table feet, and the hinge size should be adapted to the thickness of the board. Please refer to the relevant wooden table scheme.

Step 3: Make legs.

The desks in old houses are generally old, so it is necessary to make some strong legs. Under normal circumstances, the legs of a table can be made of two pieces of wood, and then tenons can be added.

Step 4: Make a desktop.

When making a desktop, you need to pay attention to the size and height of the table and whether the surface of the table needs protective coating. To make a desktop, you can add a middle board and a table board between two boards, and trim these boards again with manual or power tools.

Step 5: Assemble the table.

When assembling the table, it is necessary to adjust the length and angle of the table top and legs as needed, and then nail the hinges and legs. When installing the hinge, you need to use manual or electric tools to install the hinge in the center of the table.

Step 6: Polishing and painting.

The last step is to polish the table top and legs and apply paint or varnish to the table. Before coating, the table needs to be dried for a few days, and then the paint is evenly rubbed on the table.

The above is the specific manufacturing method of the desk in the old house, as well as some key points and details that need attention, such as the design of hinge, the production of desktop, the production of table legs and the painting process.