The satellite pot shows that the antenna is faulty, and the signal strength and quality are both 0

Hello, I have installed that. In your case, it may be that the feeder at the tuner is not connected properly, or the feeder connected to the TV is not connected properly. Try connecting those three wires. Also check the signal line, and the feeder line cannot be used too long, otherwise there will be prompts such as failure and no signal.

The antenna must be aligned in the direction, otherwise there will be no signal. In this case, it is likely that the cable is not connected properly, because there is no signal strength, so it is recommended that you check the connection problem.

I hope my answer can help you! If you are satisfied, please leave a positive comment, O(∩_∩)O~