What are the safety measures for electric water heaters? How to use the electric water heater safely?

In our home, there are more or less some security risks. Electric water heater is an electrical product used by every household, and the safety of electric water heater is also one of our most concerned topics. Next, let's see how to avoid this problem.

Safety of electric water heaters, measures 1. For electric water heaters, the biggest safety hazard is the safety of electricity use. When using electric water heater, it must be used in a home environment with leakage protection. This problem needs the attention of residents who live in old communities or rent houses outside. If you haven't confirmed whether the electricity environment in your home is safe, you might as well ask a professional to come to your home to check it.

The electric water heater is safe. Measure 2. When taking a bath, open the mixing valve. Don't point the spray head directly at the human body. Use it when the water temperature is adjusted to a suitable level, so as to avoid discomfort to users caused by too high or too low water temperature. When taking a bath, it is necessary to ensure that the sprayed water will not drench the water heater, so as to prevent the internal circuit of the water heater from being short-circuited due to humidity and causing danger.

Safety measures for electric water heaters III. In addition to the circuit, it is inevitable to connect the water pipe to the water heater. In some buildings with poor grounding or no grounding at all, some people will connect the grounding wire with the water pipe and let the water pipe serve as the grounding of the building. In this case, if a household's electrical appliances leak, the water pipes in the whole building will be charged, and users who are taking a bath with a water heater will unplug the water heater.

It will still be injured by the current introduced by the water pipe. Safety measures for electric water heaters 4. The position of the socket must be able to prevent the shower water from splashing out. In addition, remind everyone to regularly check whether the plug of the water heater is in close contact with the socket. Loose sockets will affect the electrical performance because of humid gas.

Safety of electric water heater, measure 5. Before the water heater is electrified, it must be ensured that the inner tank of the water heater has been filled with water. Otherwise, the water heater will burn out, the heating pipe will be damaged, and the thermostat will trip. Water injection method: Turn the mixing valve to hot water, and then open the tap water inlet valve. When the nozzle continuously discharges water, it means that the water in the water heater liner is full, and then it can be electrified for heating.

The electric water heater is safe. Measure 6. It is also because there is water in the electric water heater. If the ambient temperature of the bathroom is lower than 0 degrees Celsius in winter, please close the water inlet valve of the water heater and drain the water in the water tank to prevent the water heater from being damaged due to water storage freezing. In addition, after long-term use, the water heater should also discharge water from the inner container.

Safety of electric water heaters, measures 7. If the water heater is not used for a long time, the water in the inner container of the water heater should be drained to prevent the inner container from generating odor and scaling. Drainage method: first close the tap water inlet valve, then turn the mixing valve of the water heater to the hot water place, and then turn the handle of the safety valve upward to the horizontal position.

At this time, the water in the water heater liner flows out through the pressure relief port of the safety valve and flows to the sewer through the drain pipe. The above is the safety problem of electric water heater.