Car, how to save fuel when driving, what should you pay attention to when driving?

36 Tips for Beginners to Driving on the Road

Everything is difficult at the beginning, and driving is no exception. I believe every driver has experienced the uneasiness of taking to the road for the first time. He stares ahead, holds the steering wheel tightly with both hands, leans forward stiffly, away from the car in front, moves forward slowly, often stalls when starting to stop, or encounters slopes or traffic jams, etc. Etc., these are all portraits of novices, and they are easy to identify as long as you pay a little attention. Objectively speaking, novices do affect the speed of traffic and also cause some accident risks. Many people call novices "road killers". Therefore, some novices who are very "self-aware" often put words such as "Newbies please take care of me" and "Newbies running in" on the rear windshield of their cars in order to gain understanding from others. In fact, this does not have to be the case. Every driver has been a "novice" and driving is a "skilled job". As long as you are bold and careful, pay attention to solving the problems encountered, you will quickly bid farewell to the ranks of novices. In order to help the increasing number of novices to mature quickly, this magazine summarizes the common problems faced by novices and provides practical solutions for the reference of novices.

Step 1: Adjust the driving posture

The correct driving posture is very important for safe driving. It can not only eliminate the fatigue of long-term driving and ensure a good driving vision, but also It can also make driving actions more accurate, faster and more reasonable. Driving posture is mainly related to the steering wheel and seat. After sitting in the driver's seat, you should first sit deeply in the back of the seat, with your waist and shoulders leaning against the back of the seat. First feel whether the front-to-back distance of the seat and the angle of the backrest are appropriate, then extend your arms forward and naturally hold the sides of the steering wheel. At this time, the wrist must be able to bend freely and move freely. Your legs should have a certain amount of room for movement, and you should be able to step on the clutch pedal, brake pedal or accelerator without any effort, and your body does not need to lean forward. The position at this time is basically suitable. If it is not suitable, you can slide the seat back and forth or adjust the tilt angle of the chair back to meet the above requirements.

Don’t be too nervous when driving. Many novices often feel back pain after taking the road for the first time. This is mainly because the sitting posture is wrong and the body is too tense. In this way, the whole body is stiff and competing with the car, and back pain is inevitable. . Don't always drive in the same position while driving. Adjust your sitting posture appropriately to eliminate fatigue.

What needs to be emphasized is that after adjusting your driving posture, you must remember to fasten your seat belt to avoid nervousness and unsafe factors caused by suddenly remembering that you have not fastened your seat belt while driving.

Plan 2: Easily play with the steering wheel

After adjusting the driving posture, the next step is to hold and operate the steering wheel. The best position to hold the steering wheel is with your elbows slightly bent when holding the steering wheel at 3 o'clock and 9 o'clock (i.e. on both sides of the horizon) with both hands, because this allows the arms to have sufficient activity area to operate quickly. steering wheel. When holding the steering wheel, do not hold it tightly, but lightly hold it by the outer edge. Many novices always hold the steering wheel tightly, causing their hands to sweat a lot, affecting the accuracy of their movements. Moreover, they are also prone to abnormal steering wheel rotation when changing gears, which raises the risk of accidents.

The operation of the steering wheel has different degrees of steering action depending on the speed of the vehicle. The higher the vehicle speed, the smaller the steering wheel rotation. When turning, you need both hands to rotate the steering wheel, pushing with one hand and pulling down with the other hand.

In addition, the steering wheel has an automatic return function. When turning quickly, you can relax your palms and let the steering wheel return to the center quickly on its own. However, you do not want to let it rotate by itself. You still need to hold the steering wheel with both hands to keep it ready at any time. state of control.

Some novices put their hands into the inside of the steering wheel to turn the direction when the car makes a U-turn or a sharp turn. This is what is known as "wheel pulling". This way of steering seems to save effort, but when encountering an emergency, the hand cannot be withdrawn in time for emergency treatment; if the direction of the front wheel changes suddenly, it is easy to injure the arm. Beginners should break this bad habit.

Tip 3: Familiar with gears

Most novices drive a car for the first time on the road (take a manual transmission as an example) and the car they drove when learning to drive, so they are very familiar with gears. strangeness. If you don't take the time to familiarize yourself with the gears, the direct consequence is that you don't know which gear you are in when driving, and you often look down at the gear lever, which can easily lead to traffic accidents due to distraction.

Especially when encountering complex road conditions, it is easy to shift into the wrong gear due to nervousness and cause stalling. Therefore, you must be familiar with the gear before setting out on the road for the first time.

Usually the position assignment of gears is clearly printed on the handle of the shift lever. When you get into a car that you are unfamiliar with, becoming familiar with different gears is the first step. You can use the following steps to become familiar with the gears.

1. Familiarize yourself with the gears without moving the car

At this time, first look at the gear diagram at the top of the shift lever handle, press the clutch pedal to the bottom to shift, and pay attention to whether there is a reverse gear. Lock. After you are relatively familiar with the gears, take your eyes away from the gear lever and use the shifting method during normal driving to familiarize yourself with the gears.

Note: If you cannot shift gears when shifting on the spot, you can depress the clutch pedal once and then again to shift gears. Generally, the gear will be shifted smoothly.

2. Familiarize yourself with the gears while driving

Driving in an open area or on a road with very little traffic, get familiar with the gears while driving. At this time, you must insist on shifting gears without looking at the shift lever. At the same time, you must increase gears sequentially when shifting gears, and pay attention to practicing the oil-separation cooperation.

Note: Remember to put the shift lever in neutral when driving, and pay attention to avoid sudden appearance of pedestrians, non-motorized vehicles and motor vehicles while driving.

Tip 4: Be proficient in oil and clutch combination

When driving a manual transmission vehicle, the best oil and clutch combination can not only make the vehicle start smoothly and make the power output smoothly, but also can Save fuel and extend clutch life. This skill is often the hardest for novices to master, and stalling and vehicle body shaking often occur when starting. In addition, when shifting gears while driving, it is easy to cause the car to stall due to loosening the clutch too quickly. This will not only destroy the car, but also make the driving experience very uncomfortable. There are also some novices who are not skilled in clutch operation and have developed the habit of stepping on the clutch pedal, causing the clutch to be in a semi-clutch state for a long time and accelerating the damage of the clutch.

The correct oil separation should be adjusted in conjunction with vehicle speed. At the starting stage, put the gear in neutral, depress the clutch pedal after getting into the car, put the shift lever into 1st gear, slowly release the clutch, and start the car with the accelerator. When you step on the clutch pedal, you must step it all the way down. When you slowly release the clutch pedal, you can feel the shaking and moving tendencies of the car body. When the vehicle shakes slightly and shows a tendency to move, slowly refuel, and continue to slowly loosen the clutch until it is completely released, so that the vehicle Start smoothly.

Oil-separation coordination is equally important when shifting gears while the vehicle is in motion. As the vehicle speed increases, the oil-separation matching process gradually shortens, that is, the clutch pedal is released faster. In order to ensure a smooth shifting process, the accelerator must also be properly coordinated and never be forced to refuel. The ideal state is that during the shifting process, the vehicle runs smoothly, the speed increases gently, and no obvious instantaneous deceleration and acceleration are felt. On the contrary, when decelerating and downshifting, you must first brake appropriately, and when the vehicle speed is appropriate, depress the clutch pedal to change gears.

Tip 5: Find the right time to shift gears

Many novices don’t know when to shift gears, and they often end up with low gears and high speeds. The correct gear shifting should be after the car starts, as the engine speed increases, and according to different vehicle speeds, shift into the corresponding gear.

Usually, when the engine speed increases to a certain level, the engine operating noise will increase. At this time, it is necessary to upshift. The timing of shifting is generally between 2 500 and 3 000 r/min. (Engines with different performance will be different, please read the user manual before using). If a novice has not learned to shift gears according to changes in engine sound, he can observe the tachometer while ensuring safety and feel the changes in engine sound at the optimal shifting speed. The principle of deceleration shifting is the same, but it should be noted that when the vehicle speed is too fast, the vehicle speed should be reduced to the corresponding range before shifting gears.

Some drivers are accustomed to shifting gears according to vehicle speed, but this approach is not suitable for novices because their sense of speed has not yet been established. It is recommended that novices use the method of shifting gears according to engine speed. But everyone should still understand the corresponding gears at different speed stages. Taking a vehicle with a 5-speed manual transmission as an example, under normal circumstances, after starting, the 2nd gear should be selected when the vehicle speed is lower than 20 km/h, the 3rd gear should be selected when the vehicle speed is 20-60 km/h, and the 3rd gear should be selected when the vehicle speed is between 60-80 km/h. When the vehicle speed is between km/h, shift into 4th gear. If the vehicle speed exceeds 80 km/h, you can shift into 5th gear.

Plan 6: Learn to see six directions

The driver’s field of vision is limited when sitting in the car. He can usually only see the situation in front of him clearly with the naked eye. For the left, right and rear In this case, we can only use the interior rearview mirror and 2 exterior rearview mirrors. Some driving actions, such as turning, reversing, merging and overtaking, must be completed safely with the help of rearview mirrors. Therefore, novices on the road must first learn to observe the road conditions through the rearview mirror, and then achieve "six directions with eyes". Especially for some drivers who drive trucks when learning to drive, it is particularly important to learn to use the rearview mirror to observe the road conditions. In the actual driving process, novices often focus on the front and ignore the five directions of left, right, rear, up and down. So how can we achieve "six directions with eyes"?

Under the condition that the vehicle is driving in the center of the lane and the road conditions are not very complicated, force yourself to move your eyes away from the front, and use the peripheral vision of your eyes to observe the three rearview mirrors, the road and the road. Above and in front of the vehicle, keep your center field of vision scanning the vast road surface - front, back, left, right, up and down. Look forward as far as possible; look behind the center, left and right rearview mirrors to see the distance and speed of following cars in all lanes behind; look left and right from the far left to the far right of the road, including those coming from the opposite direction. Cars, parking vehicles on the left and right sides of the road, pedestrians and vehicles about to turn out of the intersection; look up to see road signs and traffic lights; look down to see road markings and road obstacles.

In the process of expanding the field of vision, the speed should not be too fast, and the scope of observation should be gradually expanded while ensuring safety.

Staring at an object for a long time while driving on the road is dangerous. Therefore, you need to practice your gaze movement. Don't focus too much on a certain car (such as the car in front) or other things. You must learn to see things at a glance. In addition, before merging or overtaking, always check the reflectors to avoid the influence of blind spots and keep track of the situation behind the car at any time.

Strategy 7: Specially practice parking and getting into position

The most troublesome thing for novices is parking. Some people jokingly say: Don’t look at many novices driving decently on the road. Once they park, The secret is revealed. Many novices have "parking phobia", and because they don't park often, they have few opportunities to practice, and their parking skills improve slowly. Therefore, novices often have scratching accidents when parking, which increases the novices' parking fear. what to do? There is only one way, and that is to practice, and you must practice various parking methods under the guidance of "experts".

When practicing, you should focus on practicing two types of parking spaces that novices think are difficult. One is where there are cars in the front and back, with a parking space in the middle; the other is where there are cars on the left and right, with a parking space in the middle.

The first way to get into a parking space is to pour it into the parking space. You can learn from the "move the parking space" method learned at the driving school, so that the rear of the car enters first to get it in place smoothly.

There are two ways to enter the second parking space, one is to drive in forward, and the other is to reverse. It is easier to drive in the forward direction. Pay attention to the distance from the left and right cars so as not to hinder the left and right cars from opening the door. When pouring, you can learn from the "sticking to the library" and "inverting the library" methods learned in driving schools.

Plan 8: Repeatedly verify the following distance

Novices often cannot judge the distance from the car in front, so they often end up far away from the car in front, which affects the speed of traffic. At the same time, it creates conditions for other vehicles to merge in front of it, creating hidden dangers of accidents. There are also some bold novices who follow the car very closely, but their ability to handle emergency situations is poor. Once the car in front slows down or stops a little too fast, it is easy to cause a rear-end accident. So how do you keep the distance right when following a car?

The following distance varies under different road conditions and different traffic speeds. A general principle is that a safe distance must be maintained between the front and rear vehicles. That is, when the vehicle in front decelerates or brakes, there is a sufficient safe distance between the two vehicles, so that there is enough time for the driver of the vehicle behind to react and take braking measures. At the same time, maintaining a limited following distance can effectively prevent vehicles in other lanes from merging in front of you at will. It is best for novices to practice repeatedly on different road conditions. When practicing, choose a road with multiple lanes traveling in the same direction. When driving, you can refer to the following distance of the vehicle in the lane next to you and verify it yourself. However, the practice process should be done step by step. From large to small, up to a reasonable safe following distance.

Tip 9: Facing meeting cars easily

During the driving process, the phase difference between the ascending car and the descending car is called meeting the car.

Many novices are afraid of meeting cars, especially when meeting cars on narrow roads. Novices often feel nervous. After a period of panic, they may stall, stop and give way, or even cause two cars to scrape, collide, or collide with each other. Roadside non-motorized vehicles, pedestrians and roadside isolation facilities, etc. In order to avoid these situations from happening, novices must first overcome their nervousness and fear psychologically and face the meeting with ease.

To meet a car correctly, you must be prepared in advance to avoid psychological panic and operational confusion during the meeting. For this reason, before meeting a car, you should do one look, two calculations, and three slowdowns: first look, that is, look at the vehicle model, speed and loading conditions of the oncoming vehicle, the width and solidity of the road ahead, the conditions of pedestrians and vehicles on the roadside, and the parking conditions on the roadside. and obstacles, etc.; second calculation, through observation and comparison, estimate the approximate location and road occupancy of the two vehicles when they meet, so as to leave a suitable lateral safety distance; third slowness, that is, slow down the vehicle speed when meeting, and when approaching the intersection In poor conditions, vehicle speeds should be controlled and vehicles should not meet blindly. If necessary, they should stop first to achieve the goal of a smooth intersection between the two vehicles.

When meeting another car, you should also pay attention to the regulations on giving way, and give way in a timely and reasonable manner. At night, on roads with no street lights or poor lighting, turn off the high beams and switch to low beams when meeting cars.

Plan 10: Explore the actions and timing of merging

Many traffic accidents are caused by drivers accidentally merging. For novices, merging is a very scary thing: the constant flow of cars, the horns and flashing lights from time to time, and the mocking eyes of other car drivers will all make novices feel inexplicable fear. Therefore, based on the actual situation, novices should try to drive honestly when they have not fully mastered the basic skills of observing the rear road conditions through the rearview mirror and following the car distance, and do not merge unless absolutely necessary. When the conditions are ripe, you will find that merging is actually very simple.

The basic principle of merging is that it cannot affect the normal driving of other vehicles. Normally driving vehicles have no obligation or responsibility to let merging vehicles pass first, so do not force the merging. When merging, you must grasp the timing well, and the merging action must be clean and complete in one go. You must prepare in advance for merging, and be sure to see the conditions in front and behind the lanes clearly before merging. Focus on checking the driving conditions of the vehicle in the lane you want to merge into, such as the speed of the vehicle in the lane, whether there is congestion or slowdown ahead, whether there is enough distance between the two vehicles for you to merge, and check your rearview mirror Are there any vehicles in the blind spot? When merging, turn on the turn signal first, then accelerate into the lane you want to merge into. After fully entering the lane, return the steering wheel and return the turn signal.

Be ethical when merging and do not force the merge, causing the vehicle behind you to slow down and give way. Don't brake just after merging, as these bad habits can easily offend others.

Strategy 11: Reverse slowly

Novices can easily make the mistake of not thinking about the future, so scratches often occur when reversing.

Driving in reverse is more difficult than driving forward. The main reason is that the line of sight is limited and it is difficult to clearly see the road and obstacles behind the car. In addition, when reversing, the rear wheels become leading and the front wheels become heel, which is subjective. There's a difference in feel and some changes in where the steering is controlled. Therefore, the operation when reversing will not feel as smooth, convenient, flexible and accurate as when moving forward. Novices must remember one word when reversing - slow.

Before reversing, you should observe the rear view mirror and turn your head through the rear windshield to observe the situation behind the car and the left and right sides of the car. According to the observed situation and the outline of the car and the width and height of the load, Reverse slowly.

When reversing, pay attention to whether there are cars or pedestrians in front or behind. Send a reversing signal and honk the horn to warn other vehicles and pedestrians. Then, with the vehicle stopped, shift the shift lever into reverse gear. When reversing, you must press the accelerator pedal steadily, and the speed should not exceed 5 km/h. Do not drive faster or slower to avoid stalling or causing danger due to excessive reversing. At the same time, you must observe the progress through the rear windshield and rearview mirror in real time. And pay attention to correct the direction to prevent the front and rear of the car from being scratched.

Plan 12: Learn to observe traffic signs

Although novices have learned traffic laws, they are most likely to violate traffic signs because they have no personal experience with traffic signs. At the same time, it is easy to take the wrong road or take the wrong path because you do not understand the traffic signs or fail to detect them in time. These situations are unavoidable. As the saying goes, one learns from every experience. The more you see, the more you master it.

In order to facilitate the observation of traffic signs, novices should pay attention to the signs on the roadside and above the road when driving. They should have a far and high field of vision, and understand the meaning of the traffic signs before driving.

In addition, when approaching an intersection, there will be guide signs on the driveway. Novices often ignore the guide traffic signs on the road because they are staring ahead, resulting in violations or taking the wrong path. Therefore, when driving to an intersection, you must slow down in advance, pay attention to the road surface and the traffic signs at the intersection ahead, and choose your driving route correctly.

Strategy 13: Memorize the roads by heart

Many novices have a headache in getting familiar with the roads, especially when encountering complex roads such as overpasses and intersections. Many people simply don’t know how to do it. Knows which way to go and doesn’t remember the route even if you have walked it several times. Because novices are not proficient in driving skills, they are in a hurry while sitting in the driving position, let alone remembering the route. According to common sense, memorizing the road while driving is a basic requirement that a qualified driver should have. Memorizing the road while driving is not difficult. As long as you pay attention, anyone can remember the road clearly.

When driving on the road, while observing the road conditions, the driver should also pay more attention to the traffic signs on the roadside. There are traffic warning signs near some intersections and overpasses. These must be remembered consciously. in mind. If you are afraid of not remembering it, you can write it down on paper. Once you pass this road again, you will have a feeling of déjà vu. When someone in the same car leads you, you should also pay more attention and don't just follow their directions mechanically.

Plan 14: Master pedestrian dynamics

Pedestrians of different ages will have different dynamics on the road. Novices should learn to treat them differently and change their driving methods in time according to different pedestrians. Very helpful for safe driving.

Children have poor self-protection awareness. They have the characteristics of changeable walking routes and uncertain stops and starts on the road. Therefore, if you encounter children on the road, you must slow down and never compete with them. road. Young people are energetic, quick-thinking, and dare to take risks. They dare to cross the road when a vehicle approaches, or walk on the road instead of the sidewalk, or even climb over the road isolation guardrail. In view of this characteristic of young people, drivers should try to leave space and leeway for them. The elderly generally move slowly and have poor vision and hearing. When they cross the road, they often do not see oncoming vehicles or cannot correctly judge the speed of the vehicle. Some elderly people even just walk with their heads down and do not look at the passing vehicles at all. Therefore, try to stay away from the elderly when driving on the road, and do not honk your horn to avoid scaring them.

Some cyclists often change their driving routes and take advantage of them when they have time, which is not conducive to driving safety. Therefore, you should keep a certain distance from them when driving on the road to prevent cyclists from falling suddenly and causing danger.

Plan 15: Pay attention to complex road conditions

When driving on the road, people often do not obey the traffic rules and walk across the road at will. This situation is especially common in cities. If the driver does not handle this situation properly, it can easily cause a traffic accident. In downtown areas or intersections in cities, especially on sections where motor vehicle lanes and non-motor vehicle lanes are not clearly divided, it is very common for pedestrians and motor vehicles to force their way onto the road. According to the provisions of the new "Road Traffic Safety Law", motor vehicles should actively give way to pedestrians and non-motor vehicles on road sections without clear traffic signal signs. Therefore, novices must learn to avoid pedestrians and must not drive out of anger or drive a car out of anger.

At some intersections, the driver's line of sight is affected by some buildings or trees. At this time, the vehicle should drive slowly and pay attention to prevent pedestrians or other vehicles from suddenly escaping from the intersection.

Strategy 16: Learn to identify wrong driving postures

Some novices have a studious spirit, and they envy the experienced drivers' ease of maneuvering the vehicle. As other drivers drive, they carefully observe and learn their driving postures and habits. However, some drivers' driving postures and driving habits are incorrect. For example, many people are accustomed to holding the steering wheel with their left hand and the shift lever with their right hand. They feel that this operation is very convenient and chic, but this is wrong. This not only affects the speed of responding to emergencies, but when holding the shift lever with the right hand, the hand will put downward pressure on the shift lever. Doing so for a long time will increase the wear of the shift mechanism and affect the life of the shift mechanism.

Tip 17: Correctly avoid obstacles

When novices encounter obstacles while driving on the road, they may not always handle them correctly. For example, some drivers are driving too fast on the road and are too late to do so. Observe the road conditions. When you see an obstacle, it is already very close, so you can only rush over the obstacle. This will cause certain damage to the chassis and tires of the car. Some drivers are too close to the car in front when driving, so they cannot observe the road conditions in front of the car in front. When the car in front safely avoids obstacles or an emergency occurs in the car in front, they have no time to take correct action and can only Emergency steering or braking will cause emergency steering and braking of nearby vehicles, which may lead to serial traffic accidents. The reason is mainly due to insufficient observation of road conditions. Therefore, when driving, you should always observe the road conditions, look far away, slow down in advance after discovering obstacles, and at the same time observe the driving conditions of vehicles in the left, right and rear directions, and avoid obstacles in a timely manner.

Plan 18: Drive cautiously at night

Many drivers like to drive at night. They think that there are fewer vehicles and pedestrians on the road at night, making driving easier. However, there are many disadvantages to driving at night, including insufficient light, unclear targets, and difficulty in identifying. Although there are headlights for illumination, the light from the opposite car often makes people blind when meeting. In addition, the lights of the cars behind can also cause glare on the rearview mirror of your own car. As a novice, you should develop a good habit of changing the lights to low beam when meeting another car. This not only improves the vision of the opposite driver, but more importantly, protects your own safety.

When the light is poor at night, you must drive carefully. If the road light is good, use low beam when driving; if the road light is very dark or even there are no street lights, it is best to drive with high beam, but in Before meeting another car, be sure to switch to low beam headlights in time. When driving at night, pay special attention to pedestrians on the roadside. For example, many elderly people like to wear dark-colored clothes, which are difficult to be found at night, and their hearing and vision are poor; pay attention to whether there are pedestrians going the wrong way or sitting on the road. Pedestrians on the side and gravel and other debris piled on the roadside.

Strategy 19: Practice the basic skills of starting on a hill

On congested urban roads, especially when many cars are queuing to get on an overpass, it is common to start and stop. . Some overpasses have steep slopes. If you don't practice the basic skills of starting on slopes, it will be really difficult to move forward at this time. As soon as you start, you turn off the engine and roll away, and the car behind you honks the horn. Can you get down and push the car? You don’t want this embarrassing situation to happen to you, so you can only practice more and master the basic skills of starting on a slope.

Novices must use the parking brake (handbrake) when starting on a hill in the early stages of their journey to prevent the car from rolling. Once you are proficient in the oil-separation combination, you can use the skilled oil-separation combination to quickly start on some slopes that are not very steep.

Plan 20: Adapt to various car models

The adaptability to various car models mentioned here does not mean that you only know how to drive a car, but let you drive a truck. This is not allowed. But you can take advantage of the appropriate opportunities to familiarize yourself with the types of vehicles your driver's license allows you to drive. For example, you can't only drive a Santana but not a Jetta. Otherwise, if you are required to drive a Jetta, you will be embarrassed to say you don't know how to drive it! However, when trying other models, it is best to have a driver who is familiar with this model to guide you and help you become familiar with the gears and the use of various functions. Don't be embarrassed to ask others for advice. Everyone has such a process and everyone can understand it.

Tip 21: Slow down smoothly when you need to stop

When driving on the road, if you see a car that "nods" a lot when braking, then this car's The driver is most likely a novice. It is a common problem for newbies to fail to control the speed when parking, which always makes people sitting in the car feel like they are on a boat. In order to avoid emergency braking or excessive braking force, novices should brake in advance before arriving at the parking destination. They can use the "point braking" method to slowly reduce the vehicle speed. When stepping on the brake pedal, the force should be moderate and slow. Don't press the pedal too hard to cause the vehicle to slow down too quickly.

Plan 22: Master the braking distance

The braking distance is different on different roads. When driving on the road, you should consider the vehicle speed, road surface conditions and weather conditions, etc. Factors, comprehensively grasp the moment of applying braking force and the intensity of pressing the brake pedal.

It is normal for novices to have difficulty grasping the braking distance. This requires time and mileage to master correctly.

When practicing, you must grasp the word "slow". You can use the method of braking in advance and slowly applying force, and constantly explore the best match between braking time and braking force.

Plan 23: Prevent stalling caused by improper operation

Stalling is a problem that novices often encounter when driving. It stalls when the red light turns green and stalls when following a car. I believe many people have encountered situations such as not shifting gears in time and stalling, stalling when braking is too large, and stalling when the steering angle is too large. Although stalling occurs in various situations, analysis of its causes is mainly due to improper coordination of clutch, throttle, brake and gear. This requires novices to become familiar with the vehicle they are driving as soon as possible and master the weight of the accelerator pedal. , the length of clutch free travel can be adjusted if the pedal position is inappropriate.

Tip 24: Treat the merging of other vehicles reasonably

When driving on multiple lanes, merging between vehicles is very frequent. When you encounter another car that wants to merge in front of your car, you must maintain a calm attitude. If you are driving faster, you should slow down appropriately to allow other cars to merge into your own lane. You must not speed up to prevent it or deliberately squeeze it out of the lane. If a car suddenly merges in front of you without turning on the turn signal, you should try to avoid it and don't be impatient, otherwise it will affect your driving safety.

Tip 25: Accurately judge the distance and position of the rear vehicle

For the judgment of the distance and position of the vehicle in front, the driver has an idea of ??the distance and position of the vehicle directly by observing it, but the judgment of the distance and position of the vehicle behind is , it is often difficult for novices to master, which often causes problems when overtaking or merging. In order to have an accurate judgment on how far away the vehicle behind you is and where its exact position is, in addition to making good use of the vehicle's rearview mirror, you must also look sideways to see if there are any vehicles in the blind spot when necessary, but the vehicle Don't look back when moving forward.

Novices should be familiar with the difference between the image in the rearview mirror and the actual distance. When practicing, you can first practice in the parking lot. After parking, observe the distance of the car behind you through the rearview mirror, and then get out of the car to verify the actual distance. Do Know it by heart. When driving on the road, the distance between vehicles should be adjusted appropriately according to the speed of your own vehicle and the vehicle behind you.

Plan 26: Driving skills in different road conditions

In various road conditions, we must first ensure the safety of driving, and secondly, we must master the driving skills according to the characteristics of different road conditions. Driving skills. For general urban roads, you should choose a good route and control the vehicle speed; on congested roads, you should ensure a safe distance from the vehicle in front and behind you, and at the same time, prevent those vehicles that are "stealing the lane" from colliding with your own vehicle; On expressways, you should not be too slow, do not occupy the passing lane for a long time, and stay away from large vehicles; on urban expressways, you should pay special attention to safety when merging and overtaking; when driving on mountain roads, you should choose a low gear and correctly control the steering wheel; On a road with continuous turns, you should try to turn as close to the center of the inner diameter of the curve as possible. This way, whether you need to give way to the outside when encountering an oncoming vehicle, or to prevent the centrifugal force of the turn from causing the vehicle to swing outward, you will have a larger safe maneuvering space; when turning sharply, , you should make good use of horns and headlights to remind oncoming vehicles to be alert; in addition, you should also learn driving skills in different weather conditions such as rain, snow and fog.

In short, the key is to quickly adapt to the environment under different road conditions, grasp the relationship between gear and speed, and be good at using lights, brakes and rearview mirrors.

Plan 27: Overtaking at the right time

Novices generally do not dare to overtake easily on the road. Different road sections and different road conditions have different driving methods for overtaking. Unless there are special circumstances, try to overtake from the left. When overtaking, first observe the left front, then the left rearview mirror and the blind spot of the left rearview mirror. After confirming safety, turn on the left turn signal and gradually cut into the left lane of the vehicle in front. When approaching the left rear of the vehicle in front, you can blow the whistle to remind the vehicle in front (do not blow the whistle in urban areas where whistle is prohibited). After overtaking is completed, the turn signal is reset. If you are overtaking at night, use the method of changing the high and low beams to remind the other party. After overtaking, decide whether to continue along the current lane or merge into the original right lane according to the road conditions ahead (if overtaking on the highway, you must return to the right lane). If you need to return to the right lane, you must keep a certain distance from the vehicle being overtaken and then turn on the right turn signal to switch to the right lane.

Plan 28: Face Overpasses Easily

More and more overpasses appear on many urban roads. Taking Beijing as an example, the large number of overpasses with different shapes often make people confused. Some drivers who are new to the road are at a loss. Driving on an overpass is a headache for them. Different overpasses have different ways of turning left, turning right, going straight, and making a U-turn. The same circular line can have three or four ways of making a left turn. If you fail to see the overpass signs clearly while driving, or take the wrong driving route, you will often take a lot of unnecessary steps or even get lost. To drive correctly on an overpass, the easiest and fastest way is to familiarize yourself with the performance characteristics of the overpass through traffic maps and online searches. In addition, it is best to drive slowly on the overpass, pay attention to every road sign, and drive clearly. route and direction.

Strategy 29: Treat the car behind you honking calmly

Many novices put a reminder sign on the rear windshield of their car that reads "Attention, don't kiss me." , "Salute to all veteran drivers" and other humorous sentences to show care for the cars behind you. This can to a large extent ensure that when the vehicle affects the driving of other vehicles, you can get the tolerance and understanding of others