Technical organizational measures for safe production of engineering projects?

What are the technical organizational measures for safe production in engineering projects? What is the safety system? Please read the article by the editor of Zhongda Consulting.

Summary of technical organizational measures for safe production of engineering projects: Safety inspection system: a nationwide inspection is conducted on the construction site every month, and a regular inspection is conducted every ten days on the construction section, which is implemented by the construction workers. Each work shift combines on-the-job safety briefings .

1. Safety system

In view of the tight construction period of this project, the following safety system must be established during the construction of this project.

1. Safety responsibility system: The project manager is responsible for the safety of the entire project construction. The main construction worker in charge of production has direct leadership responsibility for safety production and specifically organizes and implements the safety system of various safety measures. The project engineer in charge of technology is responsible for organizing the preparation and review of safety technical measures, safety technology briefing and safety technology education. There is a full-time safety manager at the construction site who is responsible for safety management and supervision and inspection. The construction worker is responsible for the safety production within the construction scope. Responsible for and implementing various safety measures. All professionals have job responsibilities. The operation team, squad leader, safety team officer, and every worker have safety responsibilities.

2. Safety education system: regular safety awareness education, new worker on-the-job education and various types of work combined with training on safety operating procedures, and technical safety briefings on specific sub-projects and the use of new materials.

3. Safety inspection system: The construction site will be inspected once a month, and the construction section will be inspected every ten days, which will be implemented by the construction workers. Inspection activities continuously improve and strengthen safety awareness, implement safety systems and safety measures, and hidden dangers can be discovered and resolved through inspection activities themselves.

2. Use safety colors and safety signs

During the construction process of this project, in order to convey safety information, all personnel on site are reminded to pay attention to safety regulations and use safety facilities correctly. Safety colors correspond to safety signs. Red means prohibition, stop (fire prevention), and is used for prohibition signs, which means prohibiting or stopping people from taking certain actions; yellow means warning and attention, and is used for warning signs, meaning that people should pay attention. Danger may occur; blue indicates prompts, safety status, and access. It is used as a prompt sign and means to indicate the target direction. Safety colors and safety signs are an integral part of safety facilities. After the safety facilities of sub-projects are completed, safety signs should be placed in eye-catching locations in a timely manner. They can be inspected and approved as a project during acceptance.

3. Arrange safety slogans

At each stage of construction, this project will be equipped with safety education, and put forward safety target slogans and safe construction aphorisms. These slogans and aphorisms can improve the atmosphere of safe production. , Improve employees’ safety awareness.

IV. Fire prevention measures at the construction site

Each dry powder fire extinguisher should be installed in the warehouse and tool room. The dry powder should be checked once a year to see if it is damp or agglomerated. The gas pressure in the small cylinder should be checked every six months. Check once. If the weight is reduced by 1/10, ventilate it.

5. Technical measures for safe use of electricity and electrical fire prevention measures

1. Measure the basic insulation of electrical equipment and draw a record sheet. If the insulation does not match, it is not allowed to be used.

2. Measure the grounding resistance and lightning protection resistance, fill in the table truthfully according to the table, and correct the resistance in time to form a grounding according to the regulations.

3. On-site wiring should not be in direct contact with steel pipes, the joints should not be mopped on the floor, and the wrapping must be three layers of insulation.

4. Use fuses rationally. Copper wires below 60A are not allowed to be used.

5. Control the secondary leakage protection and distribute the leakage switch of the electrical box. The non-operating voltage is not greater than 50MA. The non-operating current is not greater than 0.15, the non-operating voltage at the beginning of leakage of the switch box is greater than 30MA, and the non-operating current is 0.15.

6. In the same power supply network, do not mix zero and ground connections.

7. It is strictly prohibited to use "three stoves and one light" (electric stove, coal stove, open flame stove and iodine tungsten lamp) in the dormitory and use low-voltage touch switches.

8. The lighting uses 220V voltage, and the iodine tungsten lamp shell uses a three-core wire for grounding.

The above is collected and compiled by Zhongda Consulting

For more information about engineering/service/purchasing tender document writing and production, to improve the bid winning rate, you can click on the official website customer service at the bottom for free consultation: / #/?source=bdzd