What are the plans for installing elevators in old communities?

With the acceleration of urban rhythm, elevators have become one of the indispensable facilities in people's lives. However, there are also many old houses without elevators. Therefore, in order to improve travel efficiency and quality of life, people choose to install elevators in old buildings. So what are the plans for installing elevators in old communities? What are the preparations for installing elevators in old buildings? With these two questions, let's take a look!

What are the plans for installing elevators in old communities?

First of all, the tubular building can set the public corridor as the elevator level floor, which can directly reach the destination floor; Secondly, an elevator is set at the entrance of the stairs, and the corner of the stairs is a flat floor of the elevator, but it needs the upper or lower floor to reach the destination floor; Finally, the elevator can be set right in front of the entrance of the stairs and keep a distance of 2 meters from the building, but it also needs half a floor to reach the destination floor.

What are the preparations for installing elevators in old buildings?

1, construction preparation before entering the site

First of all, the height and width of the elevator door opening should be chiseled according to relevant requirements. If the doorway is too big, it needs to be modified with bricks. Then cut off the barbed wire or steel bar head protruding from the shaft wall, and clean up the garbage and accumulated water in the well to ensure the completion of the elevator shaft masonry.

2, the construction process matters needing attention and safety regulations

Secondly, before elevator installation, all installers should wear safety helmet, safety belt and tool kit, and then carefully check the installation tools and accessories to ensure normal use. Moreover, when installing the elevator, a warning line should be set up at the construction site to avoid other personnel from entering and leaving. Install according to the elevator instructions.

3. Elevator installation acceptance project

Finally, when installing the elevator, the installer needs to check and debug the elevator, such as whether the elevator is in good condition, and once problems are found, they need to be dealt with immediately. Finally, the corresponding self-inspection report is issued.

Summary: The above is the relevant contents of the elevator installation scheme in the old residential area and the preparations for installing elevators in the old building, hoping to bring help to friends in need. If you need more information, please pay attention to Qijia. com。