In the end, where do you need to sew tiles at home?

where exactly do you need to sew tiles at home? I think that as long as the tiles are laid at home, they need beautiful seams. Of course, the most needed places should be the bathroom and kitchen, and it is best to find a professional master to do it. Now the slogan put forward by Nalute is "cement will fix everything and stay away from the poison of decoration"! All its products have been selected in this year's "National Brand Plan" of CCTV, with no (TVOC-free, non-toxic and seamless), anti-dust, anti-skid and waterproof, anti-pressure, anti-seepage and anti-aging (corrosion, friction and scratch resistance), high-end specifications and multiple styles, saving time and labor, energy and environmental protection.

The concrete methods for the beautiful joint are as follows:

Construction method for the beautiful joint of ceramic tile

1. Tools/materials: glass glue gun, wallpaper knife or small awl, small scraper, waste newspaper, sponge, small bucket glass glue gun and textured paper

2. Methods/steps:

①. Construction method: the ceramic tile is beautifully welded. Then use a small scraper or finger to scrape the tile caulking agent immediately. The tile caulking agent overflowing on both sides of the brick joint can be wiped off with a wet sponge, and it must be wiped off before the tile caulking agent solidifies. After each wipe, the sponge should be cleaned with water so that it can be used again. If the seam width is more than 3mm and the tile caulking agent filled into the tile seam is relatively uniform, then there is no need to scrape the tile caulking agent and let it level automatically.

②. Leave a gap 1 mm deep. Before applying the tile caulking agent, clean up the dust in the seam with a rag or a fine brush. Stick masking paper on both sides of the seam. It is advisable that the textured paper should be about .5mm away from the edge of the gap. Put the tile caulking agent on the glue gun and drive it evenly along the brick seam. Construction about 1 meter, immediately daub evenly with fingers or a small scraper; When the tile caulking agent is not solidified (about 1 meter for construction), remove the masking paper conveniently.

③. Precautions: Be sure to tear off the masking paper in time after leveling. It is easy to uproot the tile sealant in the seam after a long time. Every time the tile caulking agent is finished, the outlet should be sealed with toothpicks or adhesive tape (to prevent waste of overflow). When jointing again, there is a small amount of overflow from the discharge nozzle, which can be erased by newspaper.

After solidification, the surface of the tile caulking agent is as smooth as porcelain, which can be scrubbed together with the tile, and has the characteristics of impermeability and waterproofness, so that the cracks of the tile can never turn black. Nowadays, the living room and kitchen and bathroom of home usually encounter the problem that the gap between tiles turns from white to black, which is extremely unsanitary and beautiful. The black gap between tiles will breed bacteria, produce odor and seriously endanger human health, especially in summer.